Schlage FE575 CAM 619 ACC Camelot Keypad Lock with Accent Lever Instruction Manual

소개

This manual provides comprehensive instructions for the installation, setup, operation, and maintenance of your Schlage FE575 CAM 619 ACC Camelot Keypad Lock with Accent Lever. This electronic keyless entry system offers enhanced security and convenience for your home or office. Please read these instructions carefully before installation and use to ensure proper function and safety.

Figure 1: Schlage FE575 CAM 619 ACC Camelot Keypad Lock with Accent Lever, Satin Nickel finish. This image displays the complete lock assembly, including the exterior keypad and lever, and the interior lever and thumbturn.

안전 정보

Always follow basic safety precautions when installing and using this product to reduce the risk of injury, fire, or electric shock. Keep all components out of reach of children. Do not attempt to disassemble or modify the lock beyond the instructions provided. Use only the specified 9V alkaline battery for operation.

패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

• 액센트 레버가 있는 외부 키패드 어셈블리
• 내부 레버 어셈블리
• 래치 볼트
• 스트라이크 플레이트
• 장착 나사
• 9V 알카라인 배터리
• 설치 지침(이 문서)
• 키 (2)

그림 2: 폭발 view of the Schlage FE575 CAM 619 ACC Keypad Lock components, including the exterior keypad, interior lever, latch, and mounting hardware.

설치

The Schlage FE575 CAM 619 ACC Keypad Lock is designed for easy installation, typically requiring only a screwdriver. It is suitable for standard door preparations and can replace most existing levers or knobs in approximately 30 minutes without hardwiring.

설치 단계:

1. 문 준비: Ensure your door has standard bore holes. If replacing an existing lock, remove it first.
2. 래치를 설치하십시오: 걸쇠 볼트를 문 가장자리에 끼우고 나사로 고정하십시오. 걸쇠가 문의 개폐 방향에 맞게 올바르게 설치되었는지 확인하십시오.
3. 외부 어셈블리 설치: Place the exterior keypad assembly onto the door, aligning the spindle with the latch mechanism.
4. 내부 조립 설치: Attach the interior lever assembly, connecting it to the exterior unit and securing it with the provided screws.
5. 배터리 설치: Insert the 9V alkaline battery into the designated compartment within the interior assembly.
6. 테스트 작업: Close the door and test the lock's functionality using the pre-programmed codes and the key.

Setup & Programming User Codes

Your Schlage Keypad Lock comes with two pre-programmed user codes for immediate use. You can easily add, change, or delete up to 19 user codes directly from the keypad.

키패드 기능:

• Pre-programmed Codes: Two codes are ready for use out of the box.
• 사용자 코드 용량: Store up to 19 unique 4-digit user codes.
• 임시 코드: Easily create and delete temporary codes for guests or service providers.
• 키패드 조명: The keypad numbers illuminate when pressed, making it easy to enter codes in low-light conditions.

프로그래밍 단계:

Refer to the detailed programming guide included in your package for specific instructions on adding, changing, or deleting user codes. Generally, this involves entering a programming code followed by the desired user code and confirmation.

작동 지침

코드로 잠금 해제:

1. Enter your 4-digit user code on the keypad.
2. The Schlage button will flash green, indicating a correct code.
3. 레버를 돌려 문을 여세요.

자동 잠금 기능:

The auto-lock feature automatically re-locks your door approximately 5 seconds after a valid code is entered and the door is closed. This provides peace of mind, ensuring your door is always secured.

Manual Locking/Unlocking (Interior):

From the interior side of the door, the lock can be manually controlled:

• 잠금 해제된 위치: When the thumbturn is in the vertical position, the door is unlocked and can be opened without a code.
• 잠긴 위치: When the thumbturn is in the horizontal position, the door is locked from the outside. Entry from the outside requires a valid code or key.

키 재정의:

In case of battery depletion or if you prefer, the lock can always be opened using the physical key provided. Insert the key into the keyhole below the keypad and turn to unlock.

유지

배터리 교체:

The lock operates on one 9V alkaline battery, which is included. With typical use, the battery life can extend up to 2 years. A dedicated low-battery indicator will alert you when replacement is needed. To replace the battery, access the battery compartment on the interior assembly, typically by removing a cover or a few screws.

청소:

Clean the keypad and lever surfaces with a soft, damp 천으로 닦으세요. 마감재나 전자 부품을 손상시킬 수 있는 연마성 세척제나 용제는 사용하지 마세요.

문제 해결

• 잠금이 응답하지 않습니다. Check the battery level. Replace the 9V battery if the low-battery indicator is on or if the keypad does not light up.
• 코드가 작동하지 않습니다: Ensure you are entering the correct 4-digit code. Try re-entering the code slowly and deliberately. If issues persist, refer to the programming guide to verify or reprogram user codes.
• Lever is stiff: Ensure the lock is properly lubricated and free from debris. Check for any obstructions in the door frame or latch mechanism.
• 자동 잠금 기능이 작동하지 않음: Verify that the door closes completely and the latch bolt fully extends into the strike plate.

명세서

보증 및 지원

Schlage locks are backed by a limited lifetime mechanical and finish warranty, and a limited three-year electronics warranty. For full details regarding your warranty coverage and to access customer support, please refer to the official Schlage web사이트를 방문하거나 고객 서비스 부서에 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.