레비톤 15-Amp 125-Volt NEMA 5-15R Narrow Body Single Receptacle (Model T5015-W) User Manual

소개

This manual provides instructions for the safe installation, operation, and maintenance of your Leviton 15-Amp 125-Volt NEMA 5-15R Narrow Body Single Receptacle, Model T5015-W. Please read these instructions thoroughly before beginning installation to ensure proper function and safety.

중요한 안전 정보

경고: To avoid fire, shock, or death, always turn off power at the circuit breaker or fuse box and test that power is off before wiring. This device must be installed in accordance with all national and local electrical codes. If you are unsure about any part of these instructions, consult a qualified electrician.

• Do not use this device with aluminum wiring. Use only with copper or copper-clad wire.
• 감전을 방지하려면 올바르게 접지하십시오.
• 이 제품에는 캘리포니아주에서 암과 선천적 기형 또는 기타 생식 기능 장애를 유발하는 것으로 알려진 화학 물질이 포함되어 있습니다(제안 65호 경고).

제품 끝view

The Leviton T5015-W is a commercial-grade, 15-Amp, 125-Volt, NEMA 5-15R single receptacle designed for durability and reliable performance in various applications. Its narrow body design allows for maximum wiring room within the electrical box, simplifying installation.

Image: Leviton 15-Amp 125-Volt NEMA 5-15R Narrow Body Single Receptacle in White.

주요 특징:

• Large-head terminal screws, backed out and staked, accept No. 10 copper or copper-clad wire.
• Heavy-Duty brass power contacts for maximum conductivity and plug retention.
• Shallow design for maximum wiring room in box.
• Convenient washer-type break-off plaster ears for best flush alignment.
• Captive mounting screws for fast installation where applicable.
• Total Power Outlets: 1.

설정 및 설치

필요한 도구:

• 드라이버 (십자형 및/또는 일자형)
• 전선 스트리퍼
• 권tag전자 테스터
• 전기 테이프(선택 사항)

설치 단계:

1. 전원 끄기: 교체하거나 설치할 콘센트를 제어하는 ​​회로 차단기 또는 퓨즈를 찾으십시오. 그것을 끄십시오. 볼륨 조절기를 사용하여 전원이 꺼졌는지 확인하십시오.tag전자 테스터.
2. (해당되는 경우) 기존 용기를 제거하십시오. Unscrew the wall plate and then the mounting screws holding the old receptacle in the electrical box. Carefully pull the old receptacle out of the box.
3. 전선 분리: Note the wire connections. Typically, black (hot) wires connect to brass screws, white (neutral) wires to silver screws, and bare copper or green (ground) wires to the green screw. Disconnect all wires.
4. 전선 준비: If necessary, strip approximately 1/2 inch (12-13 mm) of insulation from the ends of the wires. Ensure wires are straight and free of nicks.
5. Connect Wires to New Receptacle:
   • Connect the bare copper or green ground wire to the green grounding screw.
   • Connect the white (neutral) wire(s) to the silver terminal screw(s).
   • Connect the black (hot) wire(s) to the brass terminal screw(s).
   • Tighten all terminal screws firmly. Ensure no bare wire is exposed beyond the terminal screws.
   

   이미지: 클로즈업 view of the back of a receptacle, showing the green, silver, and brass terminal screws for wiring connections.
6. 마운트 수용기: Carefully fold the wires into the electrical box. Insert the new receptacle into the box and secure it with the provided mounting screws. Use the plaster ears for flush alignment.
7. 벽면 플레이트 설치: Attach the wall plate over the receptacle.
8. 복원력 : 회로 차단기나 퓨즈 박스에서 전원을 다시 켜세요.
9. 시험: Test the receptacle with a known working electrical device.

작동 지침

To operate the Leviton T5015-W receptacle, simply insert the plug of your electrical device into the outlet slots. Ensure the plug is fully inserted for a secure connection. This single receptacle provides one power outlet for standard 125-Volt devices.

유지

Regularly inspect the receptacle and wall plate for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, turn off power at the circuit breaker and replace the receptacle. Clean the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or internal components.

문제 해결

No Power at Receptacle:

• Check the circuit breaker or fuse for the circuit. Reset the breaker or replace the fuse if tripped/blown.
• Ensure all wire connections are secure at the receptacle and in the electrical box. Turn off power before checking connections.
• Verify that the power supply to the circuit is active using a voltag전자 테스터.

플러그 연결이 헐거워졌습니다.

• If plugs feel loose or fall out easily, the receptacle may be worn and require replacement to ensure a safe and reliable connection.

명세서

보증 정보

Leviton products are backed by a limited warranty. For specific warranty details and terms, please refer to the warranty documentation included with your purchase or visit the official Leviton web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

지원하다

For technical assistance, troubleshooting, or further information regarding your Leviton T5015-W receptacle, please visit the official Leviton website or contact Leviton customer service. Contact details can typically be found on the product packaging or the company's web대지.