소개
The Presto EverSharp Electric Knife Sharpener (Model 08800) provides an efficient and automatic method for sharpening most non-serrated kitchen and sport knives. This two-stage system is designed to precision grind a perfect sharpening angle and then fine hone and polish the edge, delivering professional results for home use.
그림 1: 전면 view of the Presto EverSharp Electric Knife Sharpener.
중요한 보호 조치
전기 제품을 사용할 때는 화재, 감전, 인명 피해 위험을 줄이기 위해 다음 사항을 포함한 기본적인 안전 예방 조치를 항상 따라야 합니다.
- 연필깎이를 사용하기 전에 모든 설명서를 읽으십시오.
- To protect against electrical hazards, do not immerse the sharpener in water or other liquids.
- 사용하지 않을 때, 부품을 장착하거나 분리하기 전, 세척하기 전에는 콘센트에서 플러그를 뽑아두세요.
- 움직이는 부품과의 접촉을 피하세요.
- 코드나 플러그가 손상된 상태로, 또는 기기가 오작동하거나 떨어뜨렸거나 어떤 방식으로든 손상된 후에는 기기를 작동하지 마십시오. 검사, 수리 또는 전기적 또는 기계적 조정을 위해 가장 가까운 공인 서비스 시설에 기기를 반환하십시오.
- 가전제품 제조업체에서 권장하거나 판매하지 않는 부착물을 사용하면 화재, 감전 또는 부상이 발생할 수 있습니다.
- 옥외에서는 사용하지 마십시오.
- 코드가 테이블이나 카운터 가장자리에 걸려 있거나 뜨거운 표면에 닿지 않도록 하세요.
- 이 제품은 가정용으로만 사용하도록 설계되었습니다.
- Always ensure the sharpener is placed on a stable, flat surface before use. The non-slip base helps secure the unit during operation.
설정
- Unpack the knife sharpener and place it on a clean, dry, and stable countertop.
- Ensure the power switch is in the "OFF" (O) position.
- 전원 코드를 표준 120볼트 AC 전기 콘센트에 꽂습니다.
- Verify the non-slip suction cups on the base are securely attached to the countertop to prevent movement during sharpening.
그림 2: 하단 view of the sharpener, highlighting the non-slip suction cups for stability.
작동 지침
The Presto EverSharp features a two-stage sharpening system. Stage 1 is for precision grinding, and Stage 2 is for fine honing and polishing. Always sharpen non-serrated knives. For serrated knives, refer to the specific instructions below.
Sharpening Non-Serrated Knives
- Turn the sharpener ON by pressing the power switch to the "I" position. The sharpening wheels will begin to rotate.
- Stage 1 - Coarse Sharpening: Insert the knife blade into the left slot of Stage 1 (marked '1'). Hold the knife with the blade perpendicular to the sharpener and pull it towards you with light, even pressure. The precision blade guides will automatically position the knife at the ideal sharpening angle.
- Repeat this process 3-4 times for each side of the blade, alternating between the left and right slots of Stage 1. Ensure you pull the entire length of the blade through the slot, from heel to tip.
- Stage 2 - Fine Honing: S로 이동tage 2 (marked '2'). Insert the knife blade into the left slot of Stage 2. Again, pull the knife towards you with very light pressure, allowing the Sapphirite wheels to fine hone and polish the edge.
- Repeat this 3-4 times for each side of the blade, alternating between the left and right slots of Stage 2. 이것은tage refines the edge for a razor-sharp finish.
- After sharpening, turn the sharpener OFF (O) and carefully wipe the blade with a damp 금속 조각을 제거하기 위한 천입니다.
Figure 3: Demonstrating how to hold and guide a knife through the sharpening slot.
Figure 4: Close-up of the power switch, indicating ON/OFF positions.
톱니 모양의 칼날 갈기
This sharpener can be used for non-electric serrated knives that are only serrated on one side. For these knives, only use Stage 2 (fine honing) and only sharpen the non-serrated side of the blade. Do not attempt to sharpen the serrated edge.
- Turn the sharpener ON.
- Insert the non-serrated side of the blade into the appropriate slot of Stage 2 (marked '2').
- Pull the knife towards you with light pressure, ensuring only the non-serrated edge makes contact with the sharpening wheel.
- 3~4회 반복하세요.
- Turn the sharpener OFF and clean the blade.
도움이 되는 팁
- Always use light pressure. Excessive pressure can slow the motor and damage the blade.
- Maintain a consistent speed when pulling the knife through the slots.
- For very dull knives, you may need additional passes through Stage 1 before moving to Stag및 2.
- Sparks may occur when sharpening high carbon steel knives; this is normal.
Video 1: Demonstration of the Presto EverSharp Knife Sharpener in action, showing how to achieve sharp blades quickly.
Video 2: Explaining the design for non-serrated kitchen knives and proper usage.
유지관리 및 청소
Regular cleaning ensures optimal performance and longevity of your sharpener.
- 연필깎이를 청소하기 전에는 항상 전원을 뽑으세요.
- Wipe the exterior of the sharpener with a damp 옷감. 장치를 물에 담그지 마십시오.
- The sharpener is equipped with receptacles underneath to catch metal filings. To clean, remove the red plugs on the bottom of the unit and empty the filings. Replace the plugs securely after cleaning.
- Do not attempt to lubricate the sharpening wheels or any other part of the sharpener.
문제 해결
- 연필깎이가 켜지지 않습니다. Ensure the power cord is securely plugged into a working electrical outlet and the power switch is in the "I" (ON) position.
- 칼이 제대로 날카롭게 갈리지 않음:
- Ensure you are using light, consistent pressure. Too much pressure can hinder sharpening.
- Verify you are pulling the knife through the correct slots for Stage 1과 Stag및 2.
- For very dull knives, more passes through Stage 1 may be required.
- Ensure the knife is non-serrated, or if serrated, only the non-serrated side is being sharpened in Stag및 2.
- Excessive sparks: While normal for high carbon steel, ensure you are not applying excessive downward pressure.
명세서
| 모델 번호 | 08800 |
| 상표 | 프레스토 악장 |
| 재료 | Plastic, Sapphirite wheels |
| 색상 | 실버/블랙 |
| 제품 치수 | 9.9인치 길이 x 7.2인치 너비 x 4.8인치 높이 |
| 품목 무게 | 2.95 파운드 |
| 그릿 유형 | Fine (for Stag2) 이) |
| 전원 | 120 Volts AC (North American Electrical Standards) |
보증 및 지원
The Presto EverSharp Electric Knife Sharpener (Model 08800) comes with a 1-year limited warranty against defects. For warranty claims or product support, please refer to the contact information provided in your product packaging or visit the official Presto web대지.
