1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of the AMAZON CON4 Sauna Stove Controller. Please read this manual thoroughly before installation and use to ensure safe and efficient operation of your sauna heater.
2. 안전 정보
WARNING: Electrical installation should only be performed by a qualified electrician in accordance with all local and national electrical codes.
- Always disconnect power to the sauna heater before performing any installation, maintenance, or troubleshooting.
- Do not operate the controller with wet hands or in wet conditions.
- 모든 연결 부분이 안전하고 적절히 절연되어 있는지 확인하세요.
- Keep the control panel and control box away from water and high humidity.
- This device is intended for controlling sauna stoves. Do not use it for other purposes.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- AMAZON CON4 Control Panel
- Control Box (Power Unit)
- Temperature Probe Cable
4. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 | CON4 |
| 유형 | Hand Tool Parts (Sauna Stove Controller) |
| 기원 | 중국 본토 |
| 제조업체 | Qianwang sauna swimming pool equipment |
| Control Panel Dimensions (approx.) | 24.5cm x 21cm x 10cm |
| 패키지 무게(대략) | 7.0kg |
| 패키지 크기(대략) | 45cm x 45cm x 45cm |
5. 설치 및 설정
Proper installation is crucial for the safe and effective operation of the sauna stove controller. It is highly recommended that installation be performed by a certified electrician.
5.1 구성 요소 식별
주요 구성 요소를 숙지하세요:
- 제어판: The user interface for setting time and temperature.
- 제어기: The main power unit that connects to the sauna heater and power supply.
- 온도 프로브: Measures the room temperature in the sauna.
5.2 배선 연결
The control box handles the main electrical connections to the sauna heater and the power supply. The control panel connects to the control box, and the temperature probe connects to the control panel.
- 설치: Securely mount the control box and control panel in appropriate locations. The control panel should be easily accessible to the user, while the control box can be mounted in a less visible, but well-ventilated area.
- 전원 공급 장치: Connect the main power supply to the control box. Ensure the voltage and current ratings match your sauna heater and local electrical standards.
- Sauna Heater Connection: Connect the sauna heater's power cables to the designated terminals within the control box.
- 제어판 연결: Connect the control panel to the control box using the provided cable.
- Temperature Probe Installation: Install the temperature probe inside the sauna room, typically on a wall at a recommended height (refer to your sauna heater's manual for specific placement). Connect the temperature probe cable to the designated port on the control panel.
CAUTION: Incorrect wiring can lead to electric shock, fire, or damage to the equipment. Always consult a professional for electrical installation.
6. 사용 설명서
The CON4 control panel features an intuitive interface for managing your sauna experience.
6.1 제어판 이상view
제어판에는 다음이 포함됩니다.
- 디지털 디스플레이: Two displays show "Time Remaining" and "Room Temperature".
- 버튼:
- 시간 설정: Adjusts the sauna operating time.
- 설정 온도: Adjusts the desired sauna room temperature.
- Mode A/B: Selects between different operating modes (details may vary, refer to specific sauna heater manual).
- 조명 켜기/끄기: Controls the sauna room lighting.
- 켜기/끄기: Powers the sauna heater on or off.
- 위/아래 화살표: 시간과 온도 설정을 높이거나 낮추는 데 사용됩니다.
6.2 기본 작업
- 전원 켜기/끄기: 를 누르세요 켜기/끄기 button to turn the sauna heater system on or off.
- 설정 시간:
- 를 누르세요 시간 설정 단추.
- 사용하세요 위/아래 화살표 to adjust the desired operating time.
- The display will show the remaining time during operation.
- 설정 온도:
- 를 누르세요 온도 설정 단추.
- 사용하세요 위/아래 화살표 to adjust the desired room temperature.
- 디스플레이에 현재 실내 온도가 표시됩니다.
- Controlling Light: 를 누르세요 조명 켜기/끄기 button to toggle the sauna room light.
- 모드 선택: If your sauna heater supports multiple modes, press the Mode A/B 버튼을 눌러 전환합니다.
7. 유지관리
Regular maintenance ensures the longevity and proper functioning of your sauna stove controller.
- 청소: Wipe the control panel with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- 점검: 정기적으로 모든 배선 연결부의 조임 상태와 마모 또는 손상 여부를 점검하십시오.
- 환경: Ensure the control panel and control box are kept in a dry environment, free from excessive dust or moisture.
WARNING: Always disconnect power before cleaning or inspecting the control box or any electrical components.
8. 문제 해결
If you encounter issues with your sauna stove controller, try the following basic troubleshooting steps:
- 전원 없음:
- Check the main power supply to the control box.
- 모든 전기 연결이 안전한지 확인하세요.
- 확인해주세요 켜기/끄기 버튼이 눌렸습니다.
- 잘못된 온도 측정:
- Ensure the temperature probe is correctly installed and connected to the control panel.
- Check for any obstructions around the temperature probe that might affect its reading.
- Sauna Heater Not Heating:
- Verify that the desired temperature is set higher than the current room temperature.
- Check the operating time setting; ensure sufficient time is allocated.
- Confirm that the sauna heater itself is functioning correctly (refer to the sauna heater's manual).
문제가 지속되는 경우 고객 지원팀에 문의하세요.
9. 사용자 팁
To enhance your sauna experience and ensure the longevity of your equipment:
- For optimal sauna experience, allow the sauna heater to preheat for at least 30-60 minutes before use.
- Always ensure proper ventilation in the sauna room.
- Regularly check the sauna stones and replace them if they are cracked or crumbling.
10. 보증 및 지원
10.1 보증 정보
The AMAZON CON4 Sauna Stove Controller comes with the following warranty:
- Main Electrical Components: One (1) year free warranty from the date of purchase for material and quality issues. This warranty does not cover accessories or other non-electrical parts.
- 가열 튜브: Three (3) months or ninety (90) days warranty.
The company reserves the right to choose between repair or replacement. Any returns for repair must be pre-approved by the company. Return shipping costs are the responsibility of the customer.
보증은 다음으로 인한 손상에는 적용되지 않습니다.
- Incorrect use or operation.
- Negligence or accidental breakage.
- Improper power connection.
- Modification or repair by unauthorized personnel.
After the warranty period, paid repair services are available, covering material costs for parts and travel expenses.
10.2 고객 지원
문의사항, 기술 지원 또는 보증 청구 관련 사항은 당사로 연락주시기 바랍니다.
- 왓츠앱: +86 155766507
- 이메일: 1434250503@qq.com
- 위챗: 15576650740
