1. 서론
The FLAMMA FX200 is a state-of-the-art multi-effects processor designed for guitarists seeking a comprehensive and intuitive tone solution. It features a brand-new 5-inch LCD touch screen and a polished user interface, making tone adjustments and effect management seamless. With an expanded I/O, the FX200 is versatile enough for any setting, from live performances to studio recording and home practice.
비디오: 끝view of the FLAMMA FX200 Multi Effects Pedal features and capabilities.
2. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 플라마 FX200 |
| 유형 | 멀티 이펙트 페달 |
| 표시하다 | 5인치 LCD 터치스크린 |
| 이펙트 모듈 | 10 modules, 160+ effects |
| 사전amp 모델 | 58 (non-linear sample modeling) |
| Cabinet Simulations (IRs) | 30 factory (1024pts), 50 user slots |
| 사전 설정된 슬롯 | 200(100개 뱅크 x 2개 패치) |
| 루퍼 용량 | 52 seconds (pre/post mode) |
| 드럼 머신 | 80가지 변형 |
| Metronome Styles | 10가지 스타일 |
| 입출력 | Auxiliary In, Expression Pedal, Stereo FX Loop, Stereo Out, Headphones Out, XLR Out, 5-pin MIDI In/Out, USB-C |
| 치수 | 343x170x55mm |
| 배터리가 포함되어 있습니까? | 아니요 |
| 인증 | CE, FCC |
3. 패키지 내용
상품 도착 시, 모든 품목이 있는지, 손상 없이 도착했는지 확인해주시기 바랍니다.
- FLAMMA FX200 Multi Effects Pedal
- 전원 어댑터(DC 9V 1A)
- USB-C 케이블
- 사용 설명서 (본 문서)
Image: FLAMMA FX200 product packaging.
4. 설정
4.1 전원 연결
Connect the included DC 9V 1A power adapter to the DC IN port on the rear panel of the FX200. Ensure the power switch is in the OFF position before connecting, then switch to ON after connecting the power supply.
4.2 계측기 연결
표준 1/4인치 악기 케이블을 사용하여 기타를 후면 패널의 INPUT 잭에 연결하십시오.
4.3 출력 연결
The FX200 offers various output options:
- 한 사람에게 Amplifier/Mixer (Mono/Stereo): Use the L/MONO and R OUTPUT 1/4-inch jacks to connect to your amplifier or mixer. For mono, use the L/MONO output.
- To a PA System/Audio Interface (XLR): Use the XLR OUT (L/MONO and R) ports for balanced connections to a PA system or audio interface.
- 헤드폰: 조용한 연습을 위해 헤드폰을 PHONES 잭에 연결하세요.
- FX 루프: Use the FX LOOP SEND and RETURN 1/4-inch jacks to integrate external effects pedals into your signal chain.
Image: Rear panel connections (Input, Output, FX Loop, Phones, XLR Out, MIDI, USB, DC In).
4.4 MIDI 연결
The 5-pin MIDI IN/OUT port allows for external MIDI control or sending MIDI messages to other devices. Refer to the MIDI settings in the system menu for configuration.
4.5 USB 연결
Connect the FX200 to your computer via the USB-C port for:
- Using the specialized editing software for preset management.
- 펌웨어 업데이트.
- USB audio recording (OTG Recording).
5. 사용 설명서
5.1 사용자 인터페이스 종료view
The FX200 features a 5-inch LCD touch screen for intuitive control. The MASTER knob controls the overall output volume, and the VALUE knob is used for navigating menus and adjusting parameters.
Image: FLAMMA FX200 touch screen interface for effect and system control.
5.2 Effects Modules and Chain
The FX200 includes 10 effects modules with over 160 different effects. You can customize your tone by:
- Editing the Effects Chain: Drag and drop modules on the touch screen to change their order in the signal path.
- Changing Module Type: Select a module and choose from various effect types (e.g., Overdrive, Amp, Cab, Reverb, Delay, Mod, EQ, NR).
- 매개변수 편집: Tap on a module to access its parameters and adjust them using the VALUE knob or directly on the touch screen.
Image: Editable effects chain on the FX200 display.
5.3 사전amp Models and Cabinet Simulations (IRs)
The FX200 features 58 built-in preamp models and 30 high-quality factory cabinet simulations. You can also load up to 50 third-party impulse response (IR) files, each with up to 1024 sampling points, to further customize your sound.
5.4 프리셋
The unit offers 200 editable user preset slots, organized into 100 banks with two patches (A/B) per bank. Save your customized tones to these slots for quick recall.
5.5 Footswitch Control Modes
The four footswitches provide flexible control. You can configure them for different situations:
- 일반 모드: Standard preset switching and effect on/off.
- 즐겨찾는 모드: Access your favorite presets directly.
- CTRL & TAP Mode: Use a footswitch as an on/off switch for specific effects or as a tap tempo switch for delay times and drum machine speed.
5.6 루퍼 함수
The integrated 52-second looper can be set to "pre" or "post" mode, allowing you to record your dry signal or your processed signal with effects.
5.7 Drum Machine and Metronome
Practice with 80 drum machine variations and 10 metronome styles. Adjust the tempo using the tap tempo function.
5.8 Global EQ
The Global EQ allows for quick tone adjustments to match different audio setups, ensuring your sound is consistent across various environments.
5.9 Spill-over Function
The spill-over function ensures that delay and reverb effects fade out naturally when switching presets or turning off the effect, preventing abrupt cuts in sound.
5.10 OTG 녹화
The FX200 supports OTG (On-The-Go) recording, allowing you to record directly to compatible mobile devices via the USB-C port. This is ideal for capturing ideas or creating content on the go.
Image: OTG recording setup with FLAMMA FX200 and a smartphone.
6. 유지관리
- 청소: 부드럽고 마른 천으로 제품을 닦으십시오. 연마성 세제나 용제는 사용하지 마십시오.
- 저장: 본 제품은 직사광선과 극한의 온도를 피해 서늘하고 건조한 곳에 보관하세요.
- 손질: Handle the unit with care to prevent damage to the screen, knobs, and footswitches.
- 전원 공급 장치: Always use the specified DC 9V 1A power adapter. Using an incorrect power supply can damage the unit and void the warranty.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 사운드 출력이 없습니다 | Incorrect cable connections, Master volume too low, Effect module bypassed/off, Incorrect output settings. | Check all cable connections (input, output, power). Increase Master volume. Ensure desired effect modules are active. Verify output settings match your amplifier/mixer setup. |
| 왜곡되거나 잡음이 섞인 소리 | Input gain too high, Faulty cables, Power supply issues, High gain effects. | Adjust input gain. Try different cables. Ensure power supply is correct and stable. Reduce gain on effects or amp 모델. |
| 터치 스크린이 반응하지 않습니다 | Temporary software glitch, Screen dirty. | Restart the unit. Clean the screen with a soft, dry cloth. If the issue persists, contact support. |
| Footswitches not working | Incorrect footswitch mode, Software glitch. | Check the selected footswitch mode (Normal, Favorite, CTRL & TAP) in the system menu. Restart the unit. |
| Cannot connect to PC editor | Incorrect USB cable, Driver not installed, Software not running. | Ensure you are using a USB-C data cable. Download and install the latest drivers and editor software from the FLAMMA web대지. |
8. 사용자 팁
- 전원 어댑터: A user asked if the plug is KR (Korean). The device uses a DC 9V 1A power adapter. Ensure you use the correct adapter for your region or a universal adapter with the correct specifications.
- IR을 사용해 실험해 보세요: The ability to load third-party Impulse Responses (IRs) is a powerful feature. Explore different IRs to find unique cabinet sounds that suit your style.
- 풋스위치를 사용자 지정하세요: 이점을 활용하세요tage of the different footswitch modes (Normal, Favorite, CTRL & TAP) to optimize your live performance or practice workflow.
- 소프트웨어 편집기: Utilize the dedicated PC editing software for easier and more precise management of presets, effects, and firmware updates.
9. 보증 및 지원
For warranty information, technical support, or service inquiries, please contact FLAMMA Official Store directly or visit their official web사이트. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.
