Lepro 40ft RGB LED Strip Lights User Manual

1. ಪರಿಚಯ

Thank you for choosing Lepro RGB LED Strip Lights. This manual provides detailed instructions for the safe and efficient use of your new LED strip lights. These versatile lights offer a wide range of colors and modes, perfect for enhancing various indoor environments.

Figure 1: Lepro 40ft RGB LED Strip Lights in a living room setting.

2. ಪೆಟ್ಟಿಗೆಯಲ್ಲಿ ಏನಿದೆ

ಎಲ್ಲಾ ವಸ್ತುಗಳು ಇವೆಯೇ ಎಂದು ಖಚಿತಪಡಿಸಿಕೊಳ್ಳಲು ದಯವಿಟ್ಟು ಪ್ಯಾಕೇಜ್ ವಿಷಯಗಳನ್ನು ಪರಿಶೀಲಿಸಿ:

• 1 x 39.4ft (12m) Non-Waterproof RGB LED Strip
• 1 x 44-Key IR Remote Control
• 1 x 24V Power Adapter (US Plug)

3. ಸುರಕ್ಷತೆ ಮಾಹಿತಿ

Read all safety instructions before installation and use. Keep this manual for future reference.

• ಒಳಾಂಗಣ ಬಳಕೆ ಮಾತ್ರ: This product is designed for indoor use and is not waterproof.
• ವಿದ್ಯುತ್ ಸರಬರಾಜು: Use only the provided 24V power adapter. Using an incorrect power supply may damage the product and void the warranty.
• ಅನುಸ್ಥಾಪನ ಮೇಲ್ಮೈ: ಅತ್ಯುತ್ತಮ ಅಂಟಿಕೊಳ್ಳುವಿಕೆಯ ಕಾರ್ಯಕ್ಷಮತೆಗಾಗಿ ಅನುಸ್ಥಾಪನಾ ಮೇಲ್ಮೈ ಸ್ವಚ್ಛ, ಶುಷ್ಕ ಮತ್ತು ಮೃದುವಾಗಿದೆ ಎಂದು ಖಚಿತಪಡಿಸಿಕೊಳ್ಳಿ.
• ಪಟ್ಟಿಯನ್ನು ಕತ್ತರಿಸುವುದು: Only cut the LED strip at designated cut marks (every 3 LEDs). Cutting elsewhere will damage the strip.
• ಅಧಿಕ ಬಿಸಿಯಾಗುವುದನ್ನು ತಪ್ಪಿಸಿ: Do not coil the LED strip tightly when powered on, as this can cause overheating.
• ಮಕ್ಕಳು ಮತ್ತು ಸಾಕುಪ್ರಾಣಿಗಳು: Keep the product and its components out of reach of children and pets.

4. ಸೆಟಪ್ ಮತ್ತು ಸ್ಥಾಪನೆ

ಸರಿಯಾದ ಅನುಸ್ಥಾಪನೆಗೆ ಈ ಹಂತಗಳನ್ನು ಅನುಸರಿಸಿ:

1. ಮೇಲ್ಮೈಯನ್ನು ತಯಾರಿಸಿ: Clean the desired installation surface thoroughly to remove dust, oil, or moisture. A clean, dry surface ensures strong adhesion.
2. Measure and Cut (if necessary): Unroll the LED strip and measure the required length. If shortening is needed, cut the strip only at the designated cut marks, typically indicated by a copper line and a scissor icon, every 3 LEDs.
3. Attach the Strip: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
4. Secure with Fixing Clips (Optional): For added security, especially on textured surfaces or corners, use the provided fixing clips. Secure them at regular intervals or critical points along the strip.
5. ವಿದ್ಯುತ್ ಸಂಪರ್ಕ: Connect the LED strip to the IR receiver, and then connect the IR receiver to the 24V power adapter. Plug the power adapter into a standard electrical outlet.
6. ರಿಮೋಟ್ ಅನ್ನು ಸಕ್ರಿಯಗೊಳಿಸಿ: Before first use, remove the plastic insulation tab from the battery compartment of the 44-key IR remote control.

Figure 2: Visual guide for LED strip installation steps.

Figure 3: Connection diagram and remote activation.

Figure 4: 3M Adhesive and Fixing Clips.

5. ಆಪರೇಟಿಂಗ್ ಸೂಚನೆಗಳು

Control your LED strip lights using the included 44-key IR remote control. Ensure the remote is pointed directly at the IR receiver for optimal response.

Figure 5: 44-Key IR Remote Control Layout.

ರಿಮೋಟ್ ಕಂಟ್ರೋಲ್ ಕಾರ್ಯಗಳು:

• ಆನ್/ಆಫ್: Power button to turn the lights on or off.
• ಹೊಳಪಿನ ಹೊಂದಾಣಿಕೆ: ಬಳಸಿ ↑ ಮತ್ತು ↓ ↓ ಕನ್ನಡ buttons to increase or decrease brightness.
• ಬಣ್ಣದ ಆಯ್ಕೆ: Choose from 16 preset static colors, including Red, Green, Blue (RGB), and White.
• DIY Colors: 6 programmable DIY buttons allow you to save your favorite custom color mixes.
  • ಎ ಒತ್ತಿರಿ DIY ಬಟನ್.
  • ಬಳಸಿ ↑ ಮತ್ತು ↓ ↓ ಕನ್ನಡ arrows next to R, G, B to adjust the intensity of each primary color.
  • ಅದೇ ಒತ್ತಿರಿ DIY button again to save your custom color.
• ಮೋಡ್ ಆಯ್ಕೆ: Select from 8 dynamic modes (e.g., Flash, Fade, Jump) to create different lighting effects.
  • ಫ್ಲ್ಯಾಶ್: Jumps between colors.
  • FADE3/FADE7: Fades between 3 or 7 colors.
  • JUMP3/JUMP7: 3 ಅಥವಾ 7 ಬಣ್ಣಗಳ ನಡುವೆ ಜಿಗಿಯುತ್ತದೆ.
  • ಸ್ವಯಂ: Cycles through all modes.
  • ತ್ವರಿತ/ನಿಧಾನ: ಡೈನಾಮಿಕ್ ಮೋಡ್‌ಗಳ ವೇಗವನ್ನು ಸರಿಹೊಂದಿಸುತ್ತದೆ.

Figure 6: Remote control in use for ambient lighting.

6. ನಿರ್ವಹಣೆ

Proper maintenance ensures the longevity of your LED strip lights.

• ಸ್ವಚ್ಛಗೊಳಿಸುವಿಕೆ: Gently wipe the LED strip with a soft, dry cloth to remove dust. Do not use liquid cleaners or immerse the strip in water.
• ಸಂಗ್ರಹಣೆ: If storing the lights for an extended period, ensure they are clean, dry, and coiled loosely to prevent damage.
• ಬಾಗುವುದನ್ನು ತಪ್ಪಿಸಿ: Do not bend the LED strip sharply, especially at the connection points, as this can damage the internal circuitry.

7. ನಿವಾರಣೆ

ನೀವು ಸಮಸ್ಯೆಗಳನ್ನು ಎದುರಿಸಿದರೆ, ಈ ಕೆಳಗಿನ ಸಾಮಾನ್ಯ ಸಮಸ್ಯೆಗಳು ಮತ್ತು ಪರಿಹಾರಗಳನ್ನು ನೋಡಿ:

8. ವಿಶೇಷಣಗಳು

Figure 7: ETL Listed 24V Power Adapter.

9. ಖಾತರಿ ಮತ್ತು ಬೆಂಬಲ

Lepro products are designed for reliability and performance. For specific warranty details and customer support, please refer to the warranty card included with your product or visit the official Lepro webಸೈಟ್.

ಸಂಪರ್ಕ ಮಾಹಿತಿ:

• Webಸೈಟ್: www.lepro.com (ದಯವಿಟ್ಟು ಅಧಿಕೃತವನ್ನು ಪರಿಶೀಲಿಸಿ website for the most up-to-date contact information.)
• ಇಮೇಲ್: ಉತ್ಪನ್ನ ಪ್ಯಾಕೇಜಿಂಗ್ ಅನ್ನು ನೋಡಿ ಅಥವಾ webಸೈಟ್.