ECOVACS OZMO 601 ರೋಬೋಟ್ ಮಾಪ್ ಮತ್ತು ವ್ಯಾಕ್ಯೂಮ್ ಬಳಕೆದಾರ ಕೈಪಿಡಿ

ಪರಿಚಯ

The ECOVACS OZMO 601 is a self-charging robotic cleaner designed to vacuum and mop various floor types, including carpets and hard floors. This manual provides essential information for setting up, operating, and maintaining your device to ensure optimal performance and longevity.

Image: The ECOVACS OZMO 601 Robot Mop and Vacuum, shown with its accompanying smartphone application for remote control.

ಪ್ಯಾಕೇಜ್ ವಿಷಯಗಳು

ಸೆಟಪ್ ಪ್ರಾರಂಭಿಸುವ ಮೊದಲು ಎಲ್ಲಾ ಘಟಕಗಳು ಇವೆಯೆ ಎಂದು ಖಚಿತಪಡಿಸಿಕೊಳ್ಳಿ:

• ECOVACS OZMO 601 Robot Mop & Vacuum
• ಚಾರ್ಜಿಂಗ್ ಡಾಕ್
• ಪವರ್ ಅಡಾಪ್ಟರ್
• ಸೈಡ್ ಬ್ರಷ್‌ಗಳು (2 ಜೋಡಿಗಳು)
• ಮುಖ್ಯ ಬ್ರಷ್
• ಡಸ್ಟ್ ಬಿನ್
• Water Tank with Mopping Pad
• High Efficiency Filter (with sponge)
• ಸ್ವಚ್ಛಗೊಳಿಸುವ ಸಾಧನ
• ಸೂಚನಾ ಕೈಪಿಡಿ

ಸೆಟಪ್

1. ಅನ್ಪ್ಯಾಕ್ ಮಾಡಲಾಗುತ್ತಿದೆ: Carefully remove all packaging materials and protective films from the robot and its accessories.
2. ಸೈಡ್ ಬ್ರಷ್‌ಗಳನ್ನು ಸ್ಥಾಪಿಸಿ: Press the side brushes onto the posts at the bottom of the robot until they click into place.
3. ಪ್ಲೇಸ್ ಚಾರ್ಜಿಂಗ್ ಡಾಕ್: Position the charging dock against a wall in an open area, ensuring there are no obstacles within 1 meter (3.3 feet) to the sides and 2 meters (6.6 feet) in front. Connect the power adapter to the dock and plug it into a wall outlet.
4. ಆರಂಭಿಕ ಶುಲ್ಕ: Place the robot onto the charging dock. Ensure the charging pins on the robot align with those on the dock. The indicator light on the robot will show charging status. Allow for a full charge before first use (approximately 4-5 hours).
5. Download ECOVACS HOME App: For smart control features, download the "ECOVACS HOME" app from your smartphone's app store. Follow the in-app instructions to connect your OZMO 601 to your home Wi-Fi network.

Image: The ECOVACS HOME app on a smartphone, illustrating its various control and monitoring functions for the robot cleaner.

ಆಪರೇಟಿಂಗ್ ಸೂಚನೆಗಳು

ವಿಧಾನ 1 ರಲ್ಲಿ 3: ಶುಚಿಗೊಳಿಸುವ ಚಕ್ರವನ್ನು ಪ್ರಾರಂಭಿಸುವುದು

• ಸ್ವಯಂ ಮೋಡ್: Press the Auto Mode button on the robot or in the app. The robot will automatically clean in a systematic pattern.
• ಸ್ಪಾಟ್ ಮೋಡ್: For concentrated cleaning of a small area, place the robot near the area and select Spot Mode via the app.
• ಎಡ್ಜ್ ಮೋಡ್: To clean along walls and furniture, select Edge Mode via the app.

Vacuuming Function

The OZMO 601 is equipped with a main brush and side brushes to effectively sweep and vacuum dirt, dust, and pet hair from various floor surfaces. Ensure the dust bin is properly installed before vacuuming.

Image: The underside of the ECOVACS OZMO 601, highlighting its main brush, side brushes, and the attached mopping pad for dual cleaning functionality.

Mopping Function (OZMO Mopping)

For mopping, fill the water tank with clean water and attach the mopping pad. Insert the water tank assembly into the robot. The OZMO 601 will then vacuum and mop simultaneously on hard floors. Remove the water tank and mopping pad when cleaning carpets.

Image: The ECOVACS OZMO 601 actively mopping a hard floor, demonstrating its water tank and cleaning action.

ಸಂಚರಣೆ ಮತ್ತು ಸಂವೇದಕಗಳು

The robot uses intelligent navigation to cover your floors efficiently. It is equipped with:

• ಅಡಚಣೆ ಪತ್ತೆ: Sensors help the robot detect and avoid obstacles, preventing collisions with furniture and walls.
• Anti-Drop Sensors: These sensors prevent the robot from falling down stairs or off ledges.

Image: The ECOVACS OZMO 601 illustrating its obstacle detection capabilities, navigating around furniture.

Image: The ECOVACS OZMO 601 demonstrating its anti-drop sensors, preventing it from falling down a staircase.

ನಿರ್ವಹಣೆ

Regular maintenance is crucial for the optimal performance of your ECOVACS OZMO 601. Perform these steps regularly:

• ಖಾಲಿ ಕಸದ ಬುಟ್ಟಿ: Empty the dust bin after each cleaning cycle.
• ಶುದ್ಧ ಫಿಲ್ಟರ್‌ಗಳು: Tap the high-efficiency filter to remove dust. Replace filters every 3-6 months, or as needed.
• Clean Main Brush: Use the cleaning tool to remove hair and debris from the main brush. Replace every 6-12 months.
• Clean Side Brushes: Remove tangled hair and debris from the side brushes. Replace every 3-6 months.
• Clean Water Tank and Mopping Pad: After mopping, empty any remaining water from the tank and wash the mopping pad. Allow to air dry.
• ಕ್ಲೀನ್ ಸೆನ್ಸರ್‌ಗಳು: Wipe the anti-drop sensors and obstacle detection sensors with a dry cloth to ensure proper function.

ದೋಷನಿವಾರಣೆ

If you encounter issues with your ECOVACS OZMO 601, refer to the following common solutions:

• ರೋಬೋಟ್ ಚಾರ್ಜ್ ಆಗುತ್ತಿಲ್ಲ: Ensure the charging dock is powered on and the robot is correctly aligned with the charging pins. Clean the charging contacts on both the robot and the dock.
• ರೋಬೋಟ್ ಆಗಾಗ್ಗೆ ಸಿಕ್ಕಿಹಾಕಿಕೊಳ್ಳುತ್ತದೆ: Clear obstacles, loose cables, and thick rugs from the cleaning path. The robot may struggle with high thresholds or floor patterns that confuse its sensors.
• ಕಳಪೆ ಶುಚಿಗೊಳಿಸುವ ಕಾರ್ಯಕ್ಷಮತೆ: Empty the dust bin, clean or replace filters, and remove tangled hair from brushes. Ensure the water tank is filled for mopping.
• ಅಪ್ಲಿಕೇಶನ್ ಸಂಪರ್ಕ ಸಮಸ್ಯೆಗಳು: Ensure your robot is within Wi-Fi range and your router is functioning correctly. Try restarting both the robot and your Wi-Fi router. If issues persist, a full reset of the unit and re-pairing with the app may be necessary.
• Robot not returning to charging base: Ensure the charging dock is accessible and not blocked. The robot may have run out of battery far from the dock if cleaning a very large area.

ವಿಶೇಷಣಗಳು

ಖಾತರಿ ಮತ್ತು ಬೆಂಬಲ

For warranty information, technical support, or service inquiries, please refer to the official ECOVACS webಸೈಟ್‌ನಲ್ಲಿ ಅಥವಾ ಅವರ ಗ್ರಾಹಕ ಸೇವಾ ವಿಭಾಗವನ್ನು ಸಂಪರ್ಕಿಸಿ. ಖಾತರಿ ಹಕ್ಕುಗಳಿಗಾಗಿ ಖರೀದಿಯ ಪುರಾವೆಯಾಗಿ ನಿಮ್ಮ ಖರೀದಿ ರಶೀದಿಯನ್ನು ಇರಿಸಿ.

You can visit the official ECOVACS Store for more information: ECOVACS Store on Amazon.