1. ಉತ್ಪನ್ನ ಮುಗಿದಿದೆview
The Schlage SP455A3 Kick Down Door Holder is designed to provide a simple and effective method for holding doors open. Constructed from cast aluminum with a bright brass finish, it features a 4-inch arm and a durable rubber foot for secure engagement with the floor surface. This unit is activated and released with a touch of the foot, offering convenient operation.
Figure 1: Schlage SP455A3 Kick Down Door Holder. This image displays the door holder with its 4-inch arm and rubber foot, presented in a bright brass finish.
ಪ್ರಮುಖ ಲಕ್ಷಣಗಳು:
- ಸರಳ ಕಾರ್ಯಾಚರಣೆ: Engage and release the door holder with a foot.
- ಬಾಳಿಕೆ ಬರುವ ನಿರ್ಮಾಣ: Made from cast aluminum for longevity.
- ಸುರಕ್ಷಿತ ಹಿಡಿತ: Features a rubber bottom to prevent slipping.
- Optimal Clearance: Designed for doors with a door-to-floor clearance of 2 inches or less.
- ಮುಕ್ತಾಯ: Bright Brass.
2. ಪ್ಯಾಕೇಜ್ ವಿಷಯಗಳು
ಅನುಸ್ಥಾಪನೆಯನ್ನು ಪ್ರಾರಂಭಿಸುವ ಮೊದಲು ಎಲ್ಲಾ ಘಟಕಗಳು ಇವೆಯೇ ಎಂದು ಪರಿಶೀಲಿಸಿ.
- Schlage SP455A3 Kick Down Door Holder (1 unit)
- ಮೌಂಟಿಂಗ್ ಹಾರ್ಡ್ವೇರ್ (ಸ್ಕ್ರೂಗಳು)
3. ಅನುಸ್ಥಾಪನಾ ಸೂಚನೆಗಳು
This door holder is designed for door mount installation. Ensure the door-to-floor clearance is 2 inches or less for proper function.
ಅಗತ್ಯವಿರುವ ಪರಿಕರಗಳು:
- ಪೆನ್ಸಿಲ್
- ಅಳತೆ ಟೇಪ್
- Drill with appropriate drill bit (for pilot holes)
- ಸ್ಕ್ರೂಡ್ರೈವರ್ (ಫಿಲಿಪ್ಸ್ ಹೆಡ್ ಶಿಫಾರಸು ಮಾಡಲಾಗಿದೆ)
ಅನುಸ್ಥಾಪನಾ ಹಂತಗಳು:
- ಆರೋಹಿಸುವ ಸ್ಥಳವನ್ನು ನಿರ್ಧರಿಸಿ: Position the door holder on the lower edge of the door, ensuring it is within reach for foot operation and that the rubber foot will make firm contact with the floor when engaged. The ideal location allows the door to open to the desired angle.
- ಕ್ಲಿಯರೆನ್ಸ್ ಪರಿಶೀಲಿಸಿ: With the door holder temporarily held in place, ensure that the distance from the bottom of the door to the floor is 2 inches or less. This ensures the rubber foot can effectively engage the floor.
- ಸ್ಕ್ರೂ ಹೋಲ್ಗಳನ್ನು ಗುರುತಿಸಿ: Using a pencil, mark the locations for the mounting screws through the pre-drilled holes on the door holder base.
- ಡ್ರಿಲ್ ಪೈಲಟ್ ರಂಧ್ರಗಳು: Carefully drill pilot holes at the marked locations. Use a drill bit slightly smaller than the screw diameter to prevent wood splitting.
- Attach Door Holder: Align the door holder with the pilot holes and secure it firmly to the door using the provided mounting screws and a screwdriver. Do not overtighten.
- ಪರೀಕ್ಷಾ ಕಾರ್ಯಾಚರಣೆ: Once installed, test the door holder by pushing down on the arm with your foot to engage it and lifting it to release.
4. ಆಪರೇಟಿಂಗ್ ಸೂಚನೆಗಳು
The Schlage SP455A3 Kick Down Door Holder is designed for simple, foot-activated use.
- ತೊಡಗಿಸಿಕೊಳ್ಳಲು: With your foot, gently press down on the top of the door holder's arm until the rubber foot makes firm contact with the floor and the door is held in place.
- ಬಿಡುಗಡೆ ಮಾಡಲು: With your foot, gently lift the arm of the door holder upwards. The rubber foot will disengage from the floor, allowing the door to move freely.
5. ನಿರ್ವಹಣೆ
Regular maintenance ensures optimal performance and extends the life of your door holder.
- ಸ್ವಚ್ಛಗೊಳಿಸುವಿಕೆ: Wipe the metal components with a soft, damp cloth to remove dust and grime. Avoid abrasive cleaners that may damage the finish.
- Rubber Foot Inspection: Periodically check the rubber foot for wear or damage. A worn rubber foot may reduce the holder's ability to grip the floor. Replacement rubber tips may be available from the manufacturer.
- ಸ್ಕ್ರೂಗಳನ್ನು ಬಿಗಿಗೊಳಿಸಿ: If the door holder becomes loose, gently tighten the mounting screws. Do not overtighten.
6. ನಿವಾರಣೆ
| ಸಮಸ್ಯೆ | ಸಂಭವನೀಯ ಕಾರಣ | ಪರಿಹಾರ |
|---|---|---|
| Door holder does not hold the door securely. |
|
|
| Door holder feels loose on the door. | ಮೌಂಟಿಂಗ್ ಸ್ಕ್ರೂಗಳು ಸಡಿಲವಾಗಿವೆ. | Tighten mounting screws with a screwdriver. |
7. ವಿಶೇಷಣಗಳು
| ಗುಣಲಕ್ಷಣ | ವಿವರ |
|---|---|
| ಬ್ರ್ಯಾಂಡ್ | SCHLAGE |
| ಮಾದರಿ ಸಂಖ್ಯೆ | 455A3 |
| ಆರೋಹಿಸುವ ವಿಧ | ಡೋರ್ ಮೌಂಟ್ |
| ವಸ್ತು | Aluminum, Brass, Rubber |
| ಬಣ್ಣ/ಮುಕ್ತಾಯ | ಬ್ರೈಟ್ ಬ್ರಾಸ್ |
| Arm Length / Size | 4 inches (4 in H) |
| Door-to-Floor Clearance | 2 ಇಂಚುಗಳು ಅಥವಾ ಕಡಿಮೆ |
| ಐಟಂ ತೂಕ | 2.4 ಔನ್ಸ್ |
| ಉತ್ಪನ್ನ ಆಯಾಮಗಳು | 9.43 x 4.26 x 5.95 ಇಂಚುಗಳು |
| ಒಳಗೊಂಡಿರುವ ಘಟಕಗಳು | Door holder, Mounting Hardware |
| ಬ್ಯಾಟರಿಗಳು ಅಗತ್ಯವಿದೆ | ಸಂ |
8. ಖಾತರಿ ಮತ್ತು ಬೆಂಬಲ
For specific warranty information, please refer to the documentation included with your product or visit the official SCHLAGE website. SCHLAGE products are backed by a commitment to quality and durability.
If you require technical assistance or have questions regarding your Schlage SP455A3 Kick Down Door Holder, please contact SCHLAGE customer support. Contact details are typically available on the manufacturer's webಸೈಟ್ ಅಥವಾ ಉತ್ಪನ್ನ ಪ್ಯಾಕೇಜಿಂಗ್.
