Kmart Basketball Return

Warning

• CHOKING HAZARD, small parts. Not suitable for children under three years.
• Adult assembly required.

Component contents

Plastic plate A x 4pc	Plastic ring B x 1pc	Screw B1 x 6pc	Belt C x 3pc
Long bracket D x 3pc	Short bracket E x 3pc	Screw F x 2pc	Protection cover G x 2pc

Assembly Instructions

Step 1. Joint 2pcs plastic plates (Part A) together, then lock them each other. Repeat with the other 2 plastic plates.

Step 2. Join the 2 sets of plates together and lock them into position as per diagram.

Step 3. Connect the long and short bracket (Part D & E) together, and lock them on the plastic ring (Part B).

Step 4. Connect the two parts of step 2 & 3 together at three positions, then secure them with screws (Part B1).

Step 5. Screw the 2pcs screws (Part F) into the holes at the centre from downside, then encase the screw with protection cover (Part G).
Note: Keep the protection covers on the upper side after assembly.

Step 6. Tie the 3pcs belts (Part C) on the ring through the hole, then product is ready for use.

FOR AU/NZ: IMPORTED FOR KMART STORES IN AUSTRALIA AND NEW ZEALAND.
Made in China

Documents / Resources

Kmart Basketball Return [pdf] Instruction Manual Kmart, Basketball, Return

References

• User Manual