Kmart 43472215 Solar Light String Instruction Manual

IMPORTANT: Install the solar product in an area where it can get direct sunlight. Leave the switch to ON position. Select an outdoor location away from other light sources at night, such as streetlights. It may cause the product not to turn on automatically at night.

The duration of light depends on solar product’s level of sunlight exposure, geographical locations, weather conditions, and the hours of daylight.

Care and Maintenance:
Clean the solar panel with a soft sponge every couple of weeks.
Make sure all connectors are still tight and no water is getting in. During winter, if possible, bring it inside and give it a good clean to prepare for the next year.

Caution:
Keep away from children. Do not cut the light string to fit a specific application as it will damage the light. Do not apply excessive force or repetitively bend the wire at the same spot.

Operation:

Attach the pointed ground stake to the bottom of the pole as illustrated.
Slide the solar panel box into the top of the pole as illustrated.

Press the ON/OFF switch on the bottom of the solar panel box to turn on the light.
Press the Mode switch on the bottom of the solar panel box to change the flashing styles.

You can use the remote control unit to turn on the light and adjust the mode.

FAQ

Q: How long does the light last on a full charge?
A: The duration of light varies depending on sunlight exposure, geographical locations, weather conditions, and daylight hours.

Q: Can I cut the light string to fit a specific application?
A: No, cutting the light string will damage the product.

Keycode: 43472215
PLEASE READ AND FOLLOW ALL THE INSTRUCTIONS BERORE USING THE SOLAR LIGHT. SAVE THIS MANUAL FOR FUTURE REFERENCE.

Parts list

Please check if the following parts are contained for each light. Solar Panel Box with LED

Light String 1 pc

Remote Control unit 1 pc
Pointed Ground stake 1 set

Description

Keycode	43472215
Battery	3.7V 500mAh
Qty of LED	300pcs (10 strips)
Feature	Solar, remote control, warm light, 8 modes

Assembly Instructions

Unpack the components carefully. Please check all parts have been removed from the packaging. Find an ideal Place for the Solar Light. Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The number of hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the light is placed in a shaded area, it will not be able to fully charge, and its illumination time will be limited. Do not place the light near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the light from coming on or cause it to turn off automatically. When draping the lights please ensure no lights are trailing on the ground to avoid tripping hazard.

BEFORE FIRST USE: Remove the protective film from the solar panel.

IMPORTANT:

Install the solar product in an area where it can get direct sunlight.

Leave the switch to “ON” position.
Select an outdoor location away from other light sources at night, such as streetlights. It may cause the product not to turn on automatically at night.

Duration of light depends on solar product’s level of sunlight exposure, geographical locations, weather conditions and the hours of daylight.

Care and Maintenance

Clean solar panel with a soft sponge every couple of weeks.
Make sure all connectors are still tight and no water getting in.
During the winter if you can bring it inside and give a good clean ready for next year.

Caution:

Keep away from children
Do not cut the light string to fit a specific application, cutting the light will only damage the light.
Do not apply excessive force or repetitively bend the wire at the same spot.

Operation

Firstly, attach the pointed ground stake to the bottom of the pole as illustrated.

Secondly, slide the solar panel box into the top of the pole as illustrated.

Lastly, Press the ON/OFF switch on the bottom of the solar panel box to turn on the light. Press the “Mode” switch on the bottom of the solar panel box to change the flashing styles. You can use remote control unit to turn on the light and adjust the “Mode”.

Remote control

WARNING: BUTTON CELL BATTERIES ARE HAZARDOUS (NEW OR USED). KEEP AWAY FROM CHILDREN. BUTTON CELL BATTERIES CAN CAUSE SEVERE OR FATAL INJURIES IN 2 HOURS OR LESS IF THEY ARE SWALLOWED OR PLACED INSIDE ANY PART OF THE BODY. IF YOU SUEPECT YOUR CHILD HAS SWALLOWED OR INSERTED A BUTTON CELL BATTERY, CALL THE 24HOUR POISONS INFORMATION CENTRE IN AUSTRALIA ON 131126 OR IN NEW ZEALAND 0800 764 766 OR CONTACT YOUR COUNTRY’S EMERGENCY DEPT. USED BATTERIES MUST BE DISPOSED OF IN THE GARBAGE OR A BATTERY RECYCLE FACILITY.

THIS PRODUCT CONTAINS BUTTON CELL BATTERIES SCAN THE OR CODE FOR MORE INFORMATION.

MADE IN CHINA

Documents / Resources

Kmart 43472215 Solar Light String [pdf] Instruction Manual
43472215 Solar Light String, 43472215, Solar Light String, Light String, String

References

User Manual

Kmart 43472215 Solar Light String

Product Usage Instructions

FAQ