Kmart 43165957 Passing Target
PASSING TARGET
- Key Code 4 3165957
Warning
- CHO KING HAZARD, SMALL PARTS. Not suitable for children under three years.
- Don’t aim at eyes or face.
- Adult assembly is required.
Part List
Assembly Instructions
- Step 1. Connect target (A) and center (B) together with a touch fastener. Insert 2 pcs pipes (F) into a straight connector (E) to form a longer pipe. Open the touch fastener at the edge of the target, feed through 4pc s longer pipes inside the target, then connect them together with the T connector (C) and L connector (D). FIG 1.
- Step 2. Close the touch fastener, and insert 2 pcs pipes into the T connector. FIG 2.
- Step 3. Insert 2pc s pipe s into a straight connector to form a longer pipe, insert 2pcs pipes into a T connector to form another longer pipe, then connect 2pc s longer pipes with straight connector and 2pc s another longer pipe s with T connector together with 4pcs L connector s to form a square shape base. FIG 3.
- Step 4. Inset the pipe into the T connector from step 3. Then your passing target is successfully assembled. FIG 4.
FOR AU/NZ: IMPORTED FOR KMART STO RES IN AUSTRA L IA AND NEW ZEALAND
Made in China
Documents / Resources
 |
Kmart 43165957 Passing Target [pdf] Instruction Manual 43165957 Passing Target, 43165957, Passing Target, Target |
