zigbee SNZB-02D Temperature and Humidity Sensor

សេចក្តីផ្តើម

• The SNZB-02D is a smart indoor temperature and humidity sensor that uses Zigbee 3.0 wireless communication. It is manufactured by SONOFF (or associated brands) and includes a built-in 2.5-inch LCD display which shows real-time temperature and humidity values, as well as icons indicating “hot/cold/dry/wet” status.
• Its design is compact and meant for indoor use (e.g. homes, offices, greenhouses, baby rooms, etc.), providing both local readouts and remote monitoring via a Zigbee gateway + companion app.
• It supports multiple mounting modes: desktop stand, magnetic back, or 3M adhesive mount.
• The SNZB-02D is often used in smart home setups for environmental monitoring, automation triggers (e.g. turn on humidifier, dehumidifier, HVAC), alerting, and logging historical data.

លក្ខណៈបច្ចេកទេស

ការប្រើប្រាស់

Setup / Pairing

1. Insert the battery (remove insulation) to power on the device.
2. Enter pairing mode: press & hold the pairing button for ~5 seconds (device will flash signal icon).
3. Use a Zigbee 3.0 gateway/bridge (for example, a SONOFF Zigbee Bridge, NSPanel Pro, ZBDongle, or other Zigbee hub) to discover and add the device.
4. Once paired, the sensor will begin sending temperature & humidity data to the gateway and the associated app (e.g. eWeLink or a third-party / home automation controller).
5. The LCD will display current values locally, along with icons (Hot / Cold / Dry / Wet).

ការដាក់ និងដំឡើង

• Use the desktop stand if placing on a flat surface (table, shelf).
• Use magnetic back to attach to metal surfaces.
• Use the 3M adhesive mount to fix it to walls or flat surfaces.

When positioning:

• Avoid direct sunlight or heat sources (radiators, heaters) which may skew readings.
• Avoid placing it very close to humidifiers or dehumidifiers (unless that’s what you’re measuring) because of local fluctuations.
• Ensure it’s within effective Zigbee range of the gateway (ideally with minimal signal obstruction).
• For larger homes, you may need Zigbee routers (powered devices) or signal repeaters to maintain connectivity.

Monitoring & Automation

• In the companion app or via a home automation controller, you can monitor current & historical readings (daily, monthly, etc.).
• Create automation triggers such as:
  • If humidity drops below a threshold → turn on the humidifier
  • If humidity exceeds a threshold → turn on the dehumidifier or ventilation
  • If temperature goes above or below a limit → adjust HVAC, send alerts
• Some apps allow exporting data (e.g. CSV) to analyze trends.
• You can observe icon feedback (Hot / Cold / Dry / Wet) on the display, which gives a quick indication of comfort or environmental state.

Please read the manual carefully and use  the product correctly

• អរគុណសម្រាប់ការទិញ និងប្រើប្រាស់ផលិតផលនេះ។
• Before using the product, please read the manual carefully and use the product correctly, in order to avoid damage to the equipment, such as all consequences caused by abnormal operation.
• The company will not take any responsibility.
• រូបភាពនៅក្នុងសៀវភៅណែនាំនេះត្រូវបានប្រើដើម្បីណែនាំប្រតិបត្តិការរបស់អ្នកប្រើ ហើយសម្រាប់តែឯកសារយោងប៉ុណ្ណោះ។ សូមមើលផលិតផលពិតសម្រាប់ព័ត៌មានលម្អិត។

ការពិពណ៌នាផលិតផល

ការណែនាំអំពីការដំឡើង

• Install the product on the wall with double-sided tape or place it in the space you want to measure.

Precautions:.

• កុំដំឡើងផលិតផលនៅខាងក្រៅ លើមូលដ្ឋានមិនស្ថិតស្ថេរ ឬកន្លែងណាដែលមិនមានការការពារពីភ្លៀង។
• កន្លែងដំឡើងឧបករណ៍ចាប់សញ្ញាទ្វារគួរតែរលោង រាបស្មើ ស្ងួត និងស្អាត។

ការកំណត់រចនាសម្ព័ន្ធបណ្តាញ

ថាមពលលើផលិតផល

Install the battery to start the product, paying attention to the positive and negative polarity of the battery.

Press the RESET button for 5s and release, the LED will flash for network configuration.

Quick connection mode:

• Press and hold the button for 5 seconds, the indicator light will flash slowly, and follow the prompts to add from the gateway app. When unable to connect to the network, please use compatibility mode.

របៀបភាពឆបគ្នា៖
Press and hold the button for 10 seconds, the indicator light will flash quickly, and follow the prompts to add from the gateway app.

គន្លឹះ៖
The Zigbee version product must be connected  to the Zigbee gateway to function properly and upload data to the server APP

ការពិពណ៌នាមុខងារ
After setting parameters on the APP, the device needs to be triggered once to synchronize the parameters.

• សម្រាប់អតីតample, Press the button once

សុវត្ថិភាព

សំណួរគេសួរញឹកញាប់

Q1: Can I use this sensor outdoors or in very cold weather?

A: The SNZB-02D is primarily designed for indoor use. Its rated operating temperature is from –9.9 °C to 60 °C. While –9.9 °C is moderately low, harsh outdoor conditions (freezing rain, snow, direct exposure) may exceed its tolerance or cause damage (especially to the battery and electronics). Also, it is intended for non-condensing humidity environments (5–95%), so outdoor humidity or dew could cause problems.

Q2: Why does the reading in the app sometimes differ from what is displayed on the sensor?

A: Differences may occur due to network latency (i.e. delay in updating data over Zigbee) or because the sensor may buffer changes until the reading threshold is exceeded before sending an update. Also, the display is immediate, but the app may refresh slightly later.

ឯកសារ/ធនធាន

zigbee SNZB-02D Temperature and Humidity Sensor [pdf] សៀវភៅណែនាំអ្នកប្រើប្រាស់ SNZB-02D Temperature and Humidity Sensor, SNZB-02D, Temperature and Humidity Sensor, Humidity Sensor

ឯកសារយោង

• សៀវភៅណែនាំអ្នកប្រើប្រាស់