XDSM-TW1 Desk Intercom with USB Interface Instruction Manual

The computer will automatically detect the desk intercom and
load the necessary device drivers.
The LED indicator will show a green light once connected.

Using the Desk Intercom:

The desk intercom will appear in Device Manager as “HID
Keyboard Device PDP Audio Device”.
Control the microphone and loudspeaker settings via the audio
options in the Control Panel.

Talk into the microphone from a distance of 30-50cm for optimal
ការសម្តែង។
To reduce pop noise, place the supplied windshield over the
មីក្រូហ្វូន។

Press the push-to-talk (PTT) button to talk. The loudspeaker
will be off, and the LED will show a red light while the PTT button
ត្រូវបានចុច។

ការភ្ជាប់ឧបករណ៍ខាងក្រៅ៖

If needed, you can connect a 3.5mm audio connector device for
receiving audio with the following pin configuration:

        PIN NO. Definition
        1     SPK+
        2     N/C
        3     SPK-

មាតិកាកញ្ចប់៖

XDSM-TW1 Desk Intercom
ខ្សែ USB
កញ្ចក់
សៀវភៅណែនាំអ្នកប្រើប្រាស់
ប៊ិចសញ្ញាសម្គាល់

សំណួរគេសួរញឹកញាប់៖

Failure Checking:

ពិនិត្យការភ្ជាប់ខ្សែ USB ។
If there is no sound, adjust the volume control.
If the LED is not working, reconnect to the computer or try
រន្ធយូអេសប៊ីមួយទៀត។
If issues persist, contact your seller for assistance.

“`

View Fullscreen

ការណែនាំ

DESK INTERCOM WITH USB INTERFACE
XDSM-TW1

មីក្រូហ្វូន
Gooseneck Speaker PTT LED

USB-ASocket D-Sub Socket 3.5mm Audio Jack

Volume & PTT Lock Button
កាត

បរិស្ថាន
Indoor use only Operating temperature-20¥ + 60¥ Operating humidity : 93%

តម្រូវការប្រព័ន្ធ

Operating system Windows 7 or above

ចំណុចប្រទាក់ USB

USB1.1 ឬខ្ពស់ជាងនេះ។

មុនពេលប្រើ
Connect the USB port on the desk intercom to the USB port of your computer.The computer detects the desk intercom automatically. When the desk intercom is connected to the PC for the first time, the device drivers held in the operating system are automatically loaded. The LED indicator then shows a green light.
1 The desk intercom is displayed in the Device Manager as :
HID Keyboard Device PDP Audio Device
The microphone and loudspeaker can be controlled entirely via the audio options in the Control Panel.
2 The optimum distance for talking into the microphone is 30-50cm.You can reduce pop noise by placing the supplied windshield over the microphone.
3 Press the push-to-talk (PTT)button to talk.
4 While the PTT button is pressed, the desk intercom’s loudspeaker is off and the LED shows a red light.

មុខងារ HID
When connected to the computer, the desk intercom log into as a USB HID device to the system, and when the PTT is pressed, the HID signal is used and the resulting signal is evaluated by the PC.

Function HID-Input Report ID Usage Description

PTT On 0000450000000000

F12

PTT Off 0000000000000000

N/C

ID Numbers VendorID VendorID

0x1FC8 0xD260

អូឌីយ៉ូ Jack ៣.៥ ម។ ម
If needed, you can connect a 3.5mm audio connector device for receiving audio.
Audio output mono signal

PIN NO. Defination

SPK+

N/C

SPK-

១២៣ ៤

Connect to Foot PTT
If neededyou can connect a foot PTT Device via D-Sub connector in the rear panel.

PIN NO. Defination

CLK

រ៉េត

ស៊ី។ ឌីអូ

ភីធីធី

GND

បញ្ជីកញ្ចប់
XDSM-TW1 Desk Intercom | USB cable | Windshield User manual | Marker pen
Failure Checking
1- Check the USB cable connection. 2- If you don’t hear anything, check the position of the volume control. 3- If LED don’t work, please connect with computer again or connect with another USB port of the computer. 4- If still fail, please contact with your seller.
អនុលោមភាព
CE បញ្ជាក់

ឯកសារ/ធនធាន

XDSM XDSM-TW1 Desk Intercom with USB Interface [pdf] សៀវភៅណែនាំ
TW1, XDSM-TW1 Desk Intercom with USB Interface, XDSM-TW1, Desk Intercom with USB Interface, Intercom with USB Interface, USB Interface

ឯកសារយោង

សៀវភៅណែនាំអ្នកប្រើប្រាស់

XDSM-TW1 Desk Intercom with USB Interface

លក្ខណៈ​ពិសេស៖

សេចក្តីណែនាំអំពីការប្រើប្រាស់ផលិតផល៖

មុនពេលប្រើ៖