មាតិកា លាក់
1 TNCE Zigbee EU 16A 20A Smart Socket ជាមួយនឹងម៉ូនីទ័រថាមពល
2 លក្ខណៈពិសេស
3 ការពិពណ៌នាផលិតផល
4 សំណួរគេសួរញឹកញាប់
5 ឯកសារ/ធនធាន
5.1 ឯកសារយោង

និមិត្តសញ្ញា Zigbee

TNCE  Zigbee EU 16A 20A Smart Socket With Power Monitor

TNCE-Zigbee-EU-16A-20A-Smart-Socket-With-Power-Monitor-product-image

សៀវភៅណែនាំអ្នកប្រើប្រាស់

អ៊ីមែលជំនួយផ្នែកបច្ចេកទេស៖ support@sparkleiot.com

លក្ខណៈពិសេស

  • Support for access to Samsung SmartThings hub, Amazon Echo Plus, Amazon Echo Show(2nd), Hub Plus, Wink Hub, or Zigbee 3.0 Hub.
  • No need for any Zigbee hubs, directly support Amazon Echo Smart speaker to control the controller. After paired, you can use the Alexa App or Voice to control the devices.

ការពិពណ៌នាផលិតផល

Short press to power on/off the socket. Long press for 5 seconds to reset the socket.

TNCE-Zigbee-EU-16A-20A-Smart-Socket-With-Power-Monitor-image (1)

ប៊ូតុង សូចនាករ LED

ការពិពណ៌នាអំពីសូចនាករ LED

  • សូចនាករ LED បើកភ្លើងមានន័យថាបើករន្ធ។
  • Indicator LED Light-off means socket powers off.
  • Indicator LED blinks, which means the socket is at configuration mode(factory mode).

តើធ្វើដូចម្តេចដើម្បីកំណត់រន្ធទៅរបៀបរោងចក្រ?
Long press the button for 5s, the indicator LED will blink, that means the socket already set to factory mode.

តើធ្វើដូចម្តេចដើម្បីភ្ជាប់ឧបករណ៍ទៅ Amazon Alexa?

  1. Power on the socket, and confirm that the socket is in the factory mode(LED Flash).
  2. សួរថា "Alexa រកឃើញឧបករណ៍របស់ខ្ញុំ។"
  3. Follow the voice prompt, after finish adding the smart plug, then check the added device in Amazon Alexa APP.TNCE-Zigbee-EU-16A-20A-Smart-Socket-With-Power-Monitor-image (2)
  4. Ask, “Alexa, turn on first plug.” This will turn the first plug on.
  5. You can use Amazon Alexa app to add group, routines or modify device names such as bedroom plug. Then, you can use the Alexa app or voice to control the devices.

តើធ្វើដូចម្តេចដើម្បីភ្ជាប់ឧបករណ៍ទៅមជ្ឈមណ្ឌល Samsung SmartThings?

  1. Power on the socket, and confirm that the socket is in the factory mode(LED Flash).
  2. Click the upper right corner “+” to choose “Add device” in Samsung SmartThings APP.TNCE-Zigbee-EU-16A-20A-Smart-Socket-With-Power-Monitor-image (3)
  3. Click “SmartThings” icon, go to SmartThings device list, then choose the correct Outlet (STS-OUT&Others).TNCE-Zigbee-EU-16A-20A-Smart-Socket-With-Power-Monitor-image (4)
  4. សូមធ្វើតាមការណែនាំនៅលើចំណុចប្រទាក់ APP ដើម្បីបន្ថែមឧបករណ៍ដោយធ្វើតាម។

TNCE-Zigbee-EU-16A-20A-Smart-Socket-With-Power-Monitor-image (5)

តើធ្វើដូចម្តេចដើម្បីភ្ជាប់ឧបករណ៍ទៅមជ្ឈមណ្ឌល PHILIPS?

  1. Power on the socket, and confirm that the socket is in the factory mode (LED Flash).
  2. ចុចជ្រុងខាងស្តាំខាងក្រោម “ការកំណត់” ដើម្បីជ្រើសរើស “ការដំឡើងពន្លឺ” នៅក្នុងកម្មវិធី Philips HUB ។TNCE-Zigbee-EU-16A-20A-Smart-Socket-With-Power-Monitor-image (6)
  3. .Click the upper left corner “add light and click “Search”.TNCE-Zigbee-EU-16A-20A-Smart-Socket-With-Power-Monitor-image (7)
  4. .Please follow the instructions on the APP Interface to add the device by following.

How to add Amazon Alexa and Google Assistant in the other Hub?

  1. Please confirm whether the Hub can support Amazon Alexa and Google Assistant.
  2. For support, please refer to the corresponding Hub manual to add the devices.

សំណួរគេសួរញឹកញាប់

How do I reset the socket to factory settings?

Long press the button for 5 seconds until the indicator LED blinks.

What does it mean when the Indicator LED is blinking?

The socket is in configuration mode (factory mode).

Can I use the device without a Zigbee hub?

Yes, it directly supports Amazon Echo Smart speaker for control.

How can I control the devices after pairing?

You can use the Alexa App or voice commands.

ឯកសារ/ធនធាន

TNCE Zigbee EU 16A 20A Smart Socket ជាមួយនឹងម៉ូនីទ័រថាមពល [pdf] សៀវភៅណែនាំអ្នកប្រើប្រាស់
Zigbee EU 16A 20A Smart Socket with Power Monitor, រន្ធ Smart 20A ជាមួយនឹង Power Monitor, Smart Socket with Power Monitor, Socket with Power Monitor, Power Monitor

ឯកសារយោង

ទុកមតិយោបល់

អាសយដ្ឋានអ៊ីមែលរបស់អ្នកនឹងមិនត្រូវបានផ្សព្វផ្សាយទេ។ វាលដែលត្រូវការត្រូវបានសម្គាល់ *