
Think Node M6 Meshtastic Device

សៀវភៅណែនាំអ្នកប្រើប្រាស់
ព័ត៌មានសុវត្ថិភាពផលិតផល
ការព្រមានអំពីអគ្គីភ័យ៖ Observe safety instructions and compliant operation, otherwise it may cause fire, electric shock or other injuries.
ការព្រមានអំពីការស្ទះ: The product or gadgets inside the package present a risk of causing or contributing to asphyxiation.
The product has some waterproof function and is suitable for outdoor use. However, the product does not support underwater use, in order to prevent electric shock exposure:
- Do not immerse the solar panel underwater;
- Do not spill food or drink on the solar panel;
- Do not put oil or corrosive liquid in contact with the solar panel;
- Do not place the solar panel in an extremely humid environment,
- Do not use external heating equipment to dry the solar panel;
- Do not use a high-pressure water gun to rinse the solar panel:
- Do not use or touch the solar panel in lightning or thunderstorms;
- If your solar panel is damaged or cracked, stop using it immediately.
- Please use the accessories supplied with the product or those designed specifically for this product. The use of other third-party accessories may affect the performance of the device.
- If you want to use third-party accessories, please be sure to read all product warnings before using them.
For information on compatibility of your device, please consult our information channels or contact our specialized technicians.
ការរៀបចំសម្រាប់ការដំឡើង
Please refer to the following recommendations before installation, so that the solar panels can work more efficiently.
a: Choose a suitable orientation for installation.
If you are in the Northern Hemisphere, install the solar panels facing south,

If you are in the Southern Hemisphere, install the solar panel facing north.

b: Do not install the solar panels in an environment where there are objects covering the solar panels, so as not to affect the conversion of the solar panels.

ការដំឡើងបន្ទះសូឡា
a: Bracket fixing
Select the appropriate tool to securely fasten the bracket to the wall at the desired installation location.

b: Mating solar panels to racking.

ការពិពណ៌នាមុខងារ

| ឈ្មោះ | វិធីសាស្រ្តប្រតិបត្តិការ | មុខងារ |
| ប៊ូតុងមុខងារ | ចុចពីរដង | Update node/device location information |
| ចុចបីដង | Turn GPS on/off | |
| Press and hold for 5 seconds. | បើក/បិទឧបករណ៍ | |
| ប៊ូតុងកំណត់ឡើងវិញ | ចុចមួយដង | Reset the device; a restart is required |
ការពិពណ៌នាអំពីពន្លឺសូចនាករ
| ឈ្មោះ | ស្ថានភាព | ការពិពណ៌នា | Blink Frequency |
| PWR (ក្រហម) | បើកថាមពល | The red light stays on for 10 seconds. | |
| បិទថាមពល | It blinks 5 times. | Fast blink(1 Hz). | |
| សូចនាករសាក | When the device is charging via USB or solar power (when exposed to light), the indicator light stays on. | ||
| ការជូនដំណឹងអំពីថ្មទាប | A low battery warning is triggered when the power is s 3.3V. | Slow blink (0.5 Hz). | |
| DATA (Blue) | Sending /Receiving Data | When the device is sending or receiving LoRa data, it blinks twice. | Fast blink (1 Hz). |
លក្ខណៈបច្ចេកទេសផលិតផល
Module: nRFLR1262
Bluetooth: Bluetooth Low Energy/Bluetooth 5.4
LoRa: US 915MHz/EU 868MHz (External Antenna)
ប្រភេទថ្ម៖ 18650 Li-ion Battery
សមត្ថភាពថ្ម: 7000mAh
Dimensions: 210 x 156 x 42mm (excluding antenna & bracket)
ទំងន់សុទ្ធ: 533.1g
ការវាយតម្លៃការពារ៖ IP65
សីតុណ្ហភាពប្រតិបត្តិការ: -20 ° C ទៅ +60 ° C
សីតុណ្ហភាពផ្ទុក: -30 ° C ទៅ +70 ° C
Main Board Input: 5V
1A
Solar Panel Output: Rated power 6W output
បញ្ជីវេចខ្ចប់
Solar Panel (M6) x 1
តង្កៀប x ៤
Screw Pack 1
USB-A to USB-C × 1
អង់តែន LoRa x 1
GPS Antenna x 1
សៀវភៅណែនាំអ្នកប្រើប្រាស់ x ១
សំណួរដែលសួរញឹកញាប់
1: Why do solar panels charge slower and slower after a period of normal use?
-Solar panels are suitable for outdoor installation, after al period of time the surface of solar panels may be covered with dust, debris, etc. will affect the efficiency of solar energy conversion, Please clean the surface of the solar panel regularly.
2: Are solar panel products waterproof?
-The equipment is suitable for outdoor, is with certain waterproof function, but not suitable for use underwater, also can not use high-pressure water gun rinse equipment, avoid some corrosive liquid or material touch,
3: What is the purpose of these two sensor interfaces?
-Two SP11 model sensor interfaces are reserved, allowing users to connect external sensors for UART and IIC sensor communication.
ចំណាំ៖ After using the sensor interface and USB interface, please remember to cover the waterproof cap to prevent water from entering the device and affecting its use.
ជំនួយអតិថិជន
ប្រសិនបើអ្នកមានសំណួរណាមួយ ជំនួយអតិថិជនតែងតែឈរនៅក្បែរ។
info@electrow.com
techsupport@electrow.com
សម្រាប់ព័ត៌មានលម្អិតផ្នែកបច្ចេកទេស សូមចូលទៅកាន់ផ្នែកពាក់ព័ន្ធ webទំព័រ។
ព្រមាន FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation,
ការផ្លាស់ប្តូរ ឬការកែប្រែណាមួយដែលមិនមានការយល់ព្រមច្បាស់លាស់ដោយភាគីដែលទទួលខុសត្រូវចំពោះការអនុលោមភាពអាចចាត់ទុកជាមោឃៈសិទ្ធិអំណាចរបស់អ្នកប្រើប្រាស់ក្នុងប្រតិបត្តិការឧបករណ៍។
ចំណាំ៖ ឧបករណ៍នេះត្រូវបានសាកល្បង និងរកឃើញថាអនុលោមតាមដែនកំណត់សម្រាប់ឧបករណ៍ឌីជីថលថ្នាក់ B ដោយអនុលោមតាមផ្នែកទី 15 នៃច្បាប់ FCC ។
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
តំរង់ទិស ឬផ្លាស់ប្តូរទីតាំងអង់តែនទទួល។
- បង្កើនការបំបែករវាងឧបករណ៍និងអ្នកទទួល។
- ភ្ជាប់ឧបករណ៍ចូលទៅក្នុងព្រីមួយនៅលើសៀគ្វីដែលខុសពីឧបករណ៍ទទួលត្រូវបានភ្ជាប់។
- ពិគ្រោះជាមួយអ្នកចែកបៀ ឬអ្នកបច្ចេកទេសវិទ្យុ/ទូរទស្សន៍ដែលមានបទពិសោធន៍ ដើម្បីទទួលបានជំនួយ។
- To maintain compliance with FCC’s RF Exposure guidelines. This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
![]()
![]()
Manufacturer: Elecrow
ផលិតនៅប្រទេសចិន
ឯកសារ/ធនធាន
![]() |
ThinkNode M6 Meshtastic Device [pdf] សៀវភៅណែនាំអ្នកប្រើប្រាស់ M6, M6 Meshtastic Device, Meshtastic Device, Device |
