SWEVY SW360 LCD Phase Rotation Indicator

LCD Phase Rotation Indicator

ការព្រមាន: During the testing do not touch any test pencil on any phase or any bare metal probe in order to avoid the electronic shock.

លក្ខណៈពិសេស

• Convenient and practical with compact and nice looking appearance
• PC material shell safe and durable
• Protection level CATIII 600V
• វ៉ុលទាបtage automatically reminder and shuts down if there is no operation

លក្ខណៈបច្ចេកទេស

1.  Display three digit LCD display with 18mm of text height
2. Sampling rate:3 times/second
3. វ៉ុលប្រតិបត្តិការtage ជួរ: 40-600V
4.  Working environment:Temperature:0℃to+40℃ Humidity:0-80%Rh
5.  Storage environment Temperature:-10℃to+60℃ Humidity:0-85%Rh
6.  Quiescent current less than 3mA
7. Power supply three of AAA battery
8.  Instrument size(H×W×D):116mm×66mm×26mm
9. Wire length:800mm
10. Accessories:1 of carrying case 3 of test clips

ការពិពណ៌នាបន្ទះ

1. Connecting wire for testing
2. អេក្រង់ LCD
3. សូចនាករលំដាប់ដំណាក់កាល
4. វ៉ុលថ្មtage សូចនាករស្ថានភាព
5. កន្លែងដាក់ថ្ម
6. Test clips Usage

1. After the battery is installed in the correct way, the yellow, green and red of three phase input terminals of the instrument should be reliably connected with the three phase electrical terminals to be tested.
   •  When there is no input or less than 40V,the LCD has no display.
   • When the measured three phase electricity lacks of phase the LCD will display as follows:
   • When the rotation direction of phase sequence is clockwise the LCD will display as follows:
   • When the rotation direction of phase sequence is anti-clockwise the LCD will display as follows:
     
2.  During the testing please observe whether there is a low voltage indicator on the LCD display. If there is it indicates that the battery voltage is lower than the normal value which will affect the instrument function and measurement accuracy Sometimes this situation will also cause the instrument to fail to start .At this time the battery should be replaced in time.
3.  After finishing the testing please disconnect the input terminal from the testing terminal.

សំណួរគេសួរញឹកញាប់

What should I do if the LCD does not display anything?

ត្រូវប្រាកដថាបញ្ចូលវ៉ុលtage is above 40V and all connections are secure.

តើខ្ញុំដឹងដោយរបៀបណាប្រសិនបើថ្មត្រូវការការជំនួស?

ត្រួតពិនិត្យវ៉ុលថ្មtage status indicator on the LCD. If it shows low voltage, ជំនួសថ្ម។

ឯកសារ/ធនធាន

SWEVY SW360 LCD Phase Rotation Indicator [pdf] សៀវភៅណែនាំ SW360 LCD Phase Rotation Indicator, SW360, LCD Phase Rotation Indicator, Phase Rotation Indicator, Rotation Indicator, Indicator

ឯកសារយោង

• សៀវភៅណែនាំអ្នកប្រើប្រាស់