សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 21 ខែមីនា ឆ្នាំ 2025 - ម៉ោង 12:30 យប់
ដើម្បីភ្ជាប់ PowerSpace ampកាន់តែចាស់ ទៅកាន់បណ្តាញរបស់អ្នក សូមអនុវត្តតាមជំហានទាំងនេះ៖
1. Make sure your computer is connected to the same network as the amplifier or directly to the Ethernet port of the ampកាន់តែចាស់។
2. Download the Discovery Tool application from bosepro.link/psasw and run it.
3. បើកភ្លើង amplifier by pressing the Power switch on the front panel.
4. In the Discovery Tool application, click Refresh to see the IP address of the ampកាន់តែចាស់។
5. Click Configure or enter the IP address manually into your web កម្មវិធីរុករក។
6. The PowerSpace configuration utility will open in your browser window.
7. Use the configuration utility to set up and configure the amplifier according to your needs.
Note: The PowerSpace configuration utility is compatible with Google Chrome, Mozilla Firefox, Microsoft Edge, and Internet Explorer.
For more detailed instructions and information, refer to the "Setting Up a PowerSpace Plus Ampកាន់តែចាស់" section in the installation guide.
បន្ថែមមតិយោបល់ថ្មី។