មាតិកា
លាក់
Plexilent RM4 Smart Remote
លក្ខណៈបច្ចេកទេសនៃប៊ូតុង
ការថែរក្សាការពារ
- To pair the remote, press and hold the ‘Pair’ button for 3-5 seconds. The remote will enter pairing mode.
- Tap the “+” icon in the app to add a remote. The app will scan for nearby devices and display an option to add them. Select the remote from the list to complete the pairing process.
កំណត់រចនាសម្ព័ន្ធគ្រាប់ចុចក្រុមនៅលើឧបករណ៍បញ្ជាពីចម្ងាយ
ការកំណត់ក្រុមលំនាំដើម៖
- The first 16 groups set in the app are automatically assigned to the group keys 1, 2, 3, and 4, and so on, in the remote.
- These keys will function for the first sixteen groups from the app until reconfigured.
ការចូលប្រើអេក្រង់ត្រួតពិនិត្យ៖
- To configure the group keys, open the control screen for the remote in the app. Long-press the icon of the newly added remote in the app to access the control screen.
- Entering Configuring Mode: After opening the control screen, press and hold both the ‘Pair’ buttons on the remote to enter configuring mode.
- Assigning Group Keys: Once the remote is in configuring mode, you can assign the group keys (1, 2, 3, 4, and so on) to the groups of your preference for easy access.
ការប្រើប្រាស់
Power Button – To turn the desired group ON or OFF, press the ‘POWER’ button.
Lock Button – The lock button holds the current settings and disables other function keys. Press it again to unlock and regain full control of the remote.
- ALL Button – “Pressing the ‘ALL’ button activates all connected devices. Once activated, pressing any function key will prompt all devices to execute the selected command.
- CCT Presets – The 4 CCT preset buttons allow you to quickly switch between different light temperatures, ranging from warm white to cool white
ផ្លាស់ប្តូរពណ៌
- Tune ColorTo switch between the spectrum of colors, press on the “RGB+ & RGB-”
ពន្លឺ RGB
- Control RGB Brightness with the ‘UP’ and ‘Down’ arrows to adjust the brightness of the RGB lights.
កំណត់ពន្លឺជាមុន
- SET Brightness – These buttons allow you to instantly set the brightness to 25%, 50%, 75%, or 100% for quick adjustments.
ផ្លាស់ប្តូរពន្លឺ
Dimming adjusts the brightness of the CCT intensity of the devices,
press ‘Bright +’ or ‘Bright -‘ as per your convenience.
ផ្លាស់ប្តូរពណ៌សីតុណ្ហភាព
- Tuning CCT – To adjust the CCT color temperature, press the “CCT+” to increase or “CCT-” to decrease.
- Group Buttons – Activate a Group of Devices. To activate a group of devices, first press the “Group Number” button.
- Selecting Groups 1 to 9: After pressing Group Number, eg, 2, followed by the “Group Active” Button.
- សម្រាប់អតីតample: Group 1: Press 1 followed by the “Group Active” Button. Group 2: Press 2 followed by the “Group Active” Button, and so on.
- Selecting Groups 10 to 16: For groups 10 to 16, press the two keys representing the group number, followed by the “Group Active” button.
- សម្រាប់អតីតample: Group 10: Press 1 and 0 followed by the “Group Active” Button.
GROUP ACTIVATION
- Press the “Group Active” button to initiate group selection mode. This step is required after selecting any specific group.
ការធ្វើសកម្មភាពលើឆាក
- Activate Scene Mode: Press the “Scene Active” button to enter scene selection mode.
- Select a Scene: After pressing the corresponding scene number, press “Scene Active” to enter scene selection mode.
- For scenes 1 to 9: Press for eg 2 followed by “Scene Active” to enter scene selection mode for the second scene.
- For scenes 10 to 50: Press the two-digit number representing the scene (e.g., 1 and 0 for Scene 10, continuing up to 5 and 0 for Scene 50) followed by “Scene Active” to enter scene selection mode for the second scene.
- Control the Scene Once the scene number is selected, followed by the “Scene Active”, the remote will activate the corresponding scene settings as configured in the app.
គូដោយដៃ
- Press the Unpair Button: Press and hold the ‘Unpair’ button on the remote.
- Hold for a Few Seconds: Keep holding the button for a few seconds until you see a notification on the remote (such as a light flash) indicating that it is unpairing.
- Remote is Unpaired: Once the unpairing process is complete, the remote will return to its default factory settings.
- ការផ្គូផ្គងពីមុនណាមួយជាមួយកម្មវិធីនឹងត្រូវបានលុប ហើយឧបករណ៍បញ្ជាពីចម្ងាយនឹងត្រូវផ្គូផ្គងម្តងទៀត មុនពេលវាអាចប្រើបាន។
- Re-pairing the Remote: To use the remote again, follow the steps to pair it with the app as outlined in the “Pairing the Remote with the App” section.
ផ្ដាច់តាមរយៈកម្មវិធី
- Open the Control Screen: Press and hold the remote icon in the app to open the control screen.
- Enter Configuring Mode: On the control screen, press and hold the ‘UNPAIR’ button on the remote to enter configuring mode.
- Select Kickout in the App: Once in configuring mode, tap the ‘Kickout’ button in the app to unpair the remote.
- Confirm Unpairing: The LED on the remote will blink 8 times to confirm that the remote has been successfully unpaired.
សំណួរគេសួរញឹកញាប់
តើខ្ញុំត្រូវកំណត់ឧបករណ៍បញ្ជាឡើងវិញដោយរបៀបណា?
To reset the remote, press and hold the 'Pair' button for 10 seconds until the remote resets to factory settings.
Why is my remote not pairing with the devices?
If your remote is not pairing, try replacing the batteries and ensure the remote is within range of the devices. Resetting both the remote and devices may also help establish a connection.
How can I add new devices to the remote?
To add new devices, open the app, tap the + icon, and follow the on-screen instructions to scan and add nearby devices to the remote.
ឯកសារ/ធនធាន
 |
Plexilent RM4 Smart Remote [pdf] សៀវភៅណែនាំអ្នកប្រើប្រាស់ CP-BM104K33-RGBCW-G16P4, RM4 Smart Remote, RM4, Smart Remote, Remote |