OVR Performance Sprint Kit
“
លក្ខណៈបច្ចេកទេស
- Device Name: OVR Sprint
- ច្រកបញ្ចូលថ្ម៖ USB-C
- ការបង្ហាញ: OLED
- Battery Level Indicator: Red (Low), Green (High)
- LED Indicators: Red (Charging), Green (Fully Charged)
ការណែនាំអំពីការប្រើប្រាស់ផលិតផល
ឧបករណ៍បញ្ចប់view
The OVR Sprint consists of a Sender and a Receiver unit. The
Sender unit features ON LEDs, an ON/OFF switch, a Battery Level
Indicator, a Charging LED, and a USB-C Charging Port. The Receiver
unit includes Status LEDs, a Charging LED, a USB-C Charging Port,
an ON/OFF switch, an OLED Display, Control Buttons, and an
អង់តែន។
Setting Up the OVR Sprint
- Unfold Tripods: Extend the tripod legs and
extend the arm up. - Attach Devices: Align and attach both the
Sender and Receiver units to tripods. - Align Lasers: Point the sender to the receiver
until the LEDs turn green. - ធ្វើម្តងទៀត៖ Set one device to Home and the others
to Link.
Home vs Link – Single vs Multi Modes
The Home gate serves as the hub, displaying data, controlling
the system, and connecting to the app. Link gates provide data to
the Home but cannot operate independently. Single Mode auto-resets
and records once, while Multi Mode tracks unlimited splits until
manually reset.
សំណួរគេសួរញឹកញាប់
How do I change settings?
Hold both buttons for one second to enter the settings menu.
Does the order of gates matter?
No, the Home device can be placed at the start, end, or in
រវាង
Do I need to use the app?
No, the app is optional. All data will appear on the Home
ឧបករណ៍។
“`
OVR Sprint Quickstart Guide
ឧបករណ៍បញ្ចប់view
ស្ថានភាព LEDs
អ្នកទទួល
1 Status LEDs 2 Charging LED
ក្រហម = សាកថ្ម បៃតង = សាកពេញ
3 USB-C Charging Port 4 ON/OFF Switch 5 អេក្រង់ OLED 6 ប៊ូតុងបញ្ជា 7 អង់តែន
អ្នកផ្ញើ
1 ON LEDs 2 ON / OFF Switch 3 Battery Level Indicator
ក្រហម = ថ្មទាប បៃតង = ថ្មខ្ពស់។
4 សាក LED
ក្រហម = សាកថ្ម បៃតង = សាកពេញ
5 រន្ធសាក USB-C
Red: Beam is broken, or not received
Green: Beam is active and not blocked
Blue: Timing has started in Single Mode
Orange: In-Beam start is initialized
របៀបកំណត់
Unfold Tripods
Unfold the tripod legs, and extend the arm up
ភ្ជាប់ឧបករណ៍
Align Lasers
Attach both devices to tripods Point sender to the receiver,
with threaded screws
turning the LEDs green
ធ្វើម្តងទៀត
Set one device to Home, and the rest to Link
Home vs Link Single vs Multi
The Home gate is the hub. It shows data, controls the system, and connects to the app. Link gates feed data to the Home but don’t work on their own.
Single Mode កំណត់ឡើងវិញដោយស្វ័យប្រវត្តិ និងថតម្តង ខណៈពេលដែល Multi Mode តាមដានការបំបែកគ្មានដែនកំណត់ រហូតដល់កំណត់ឡើងវិញដោយដៃ។
នៅលីវ
ច្រើន
សំណួរគេសួរញឹកញាប់
How do I change settings? Hold both buttons for one second to enter the settings menu
Does the order of gates matter? No, the Home device can be placed at the start, end, or in between
Do I need to use the app? No, the app is optional. All data will appear on the Home device
លេងហ្គេមការបណ្តុះបណ្តាលរបស់អ្នក។
For the full user manual, go to ovrperformance.com/resources
ឯកសារ/ធនធាន
 |
OVR SPRINT OVR Performance Sprint Kit [pdf] ការណែនាំអ្នកប្រើប្រាស់ OVR Performance Sprint Kit, Performance Sprint Kit, Sprint Kit |