OTTOCAST CarPlay and Android Auto
ការណែនាំអំពីផលិតផល
Carintelligent conversion box, mainly used for realizing the Wireless interconnection between the mobile phone and the car.
The conversion function integrates the mobile phone and the car screen, which will convert the diversified Mobile phones to car entertainment, providing users with music & abundant driving pleasure, reducing the frequency of using the mobile phone, and providing users with a safer driving Car experience.
Wireless CarPlay- iOS Phone user
- Connect the box to the original car USB or Type-C data interface; the ox data and wait for a Connection. Turn on WLAN
- turn on the Bluetooth of the iPhone, search for the Bluetooth Device naming “OKBox-BT_ …… or “smartBox-****” or “AIBox-BT_****”. Pair it and allow the sync.Finally, click “Use CarPlay”
- After the connection, please wait for a few seconds ds the nd CarPlay interface will be shown.
Wireless Android Auto-Android Phone user
- connects the box to the original car USB or Type-C data interface, reads the box data, and waits for a Connection. Turn on WiFi
- Turn naming on “the OKBox-BT_ Bluetooth .. **of ” or the “Phone, search smarteox–**” for or the ” Bluetooth A!Sox-BT_*-*Device .” The successful. dYour carname will change to “Your Car MyLlnk” after the link is successful
- After the Connection, please wait for a few seconds, and the Android Auto interface will be shown.
- If your car is built with wired CarPlay and wired Android Auto, both can be converted to wireless connectivity
You can open the corresponding options through the Settings of the original car (Some machines do not need to be set up). If you are an iPhone, open CarPlay for Bluetooth connection; if you are an Android phone, open Android Auto for Bluetooth connection.
ធ្វើឱ្យប្រសើរឡើងប្រអប់
តើធ្វើបច្ចុប្បន្នភាពផលិតផលដោយរបៀបណា?
Put directly into the USB 5V power supply upgrade, such as a phone charger, car charger USB.If youu plug the original USB port to upgrade, the upgrade will fail);
Join the Wifi devices naming “OKBox-BT_ ****” or “smartBox-****” or “AIBox-BT_ …… on your Phone with password:88888888
បញ្ចូលអាសយដ្ឋាន IP
192.168.1.101in your Browser, and click to upgrade; wait for a few minutes for the upgrade.
- Note: Please forget the Networks after upgrading successfully.)
Does the AIi Box have requirements for the phone?
Yes, the wireless CarPlay is available for iOS 12.1 and above. Wireless Android Auto is available for Android 0.0 and above.
How to check if the Athe i Box is suitable for my car?
- a. If your Original car only supports wired CarPlay, it can only help you switch to wireless CarPlay.
- b. If your Original car only supports wired Android Auto, it can only help you switch to wireless Android Auto.
- c. If your Original car supports wired CarPlay and Android Auto, it can help you switch to wireless CarPlay and wireless Android Auto.
Depending on whether the original car supports this feature, it just helps you switch from wired to towirelesss.s
4. DoIi have to sync the wireless Ai box adapter whenever I start my car?
Don’t worry, after the first adaptation, the wireless CarPlay or Android Auto adapter will automatically match the Bluetooth and Wifi of your iPhone every time.
5. តើធ្វើដូចម្តេចដើម្បីផ្ទុកទិន្នន័យកំណត់ហេតុនៅពេលដែលអាដាប់ទ័រមិនដំណើរការសម្រាប់អង្គភាពរថយន្តរបស់ខ្ញុំ?
Please enter the IP address page & fill in the car info in the problem description sheet, and press “Submit” to upload your log data.
សេចក្តីថ្លែងការណ៍របស់ FCC
សេចក្តីថ្លែងការណ៍របស់ FCC
This equipment has been tested and found to comply with the limits for a Class BB digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- តំរង់ទិស ឬផ្លាស់ប្តូរទីតាំងអង់តែនទទួល។
- បង្កើនការបំបែករវាងឧបករណ៍និងអ្នកទទួល។
- ភ្ជាប់ឧបករណ៍ចូលទៅក្នុងព្រីមួយនៅលើសៀគ្វីដែលខុសពីឧបករណ៍ទទួលត្រូវបានភ្ជាប់។
- ពិគ្រោះជាមួយអ្នកចែកបៀ ឬអ្នកបច្ចេកទេសវិទ្យុ/ទូរទស្សន៍ដែលមានបទពិសោធន៍ ដើម្បីទទួលបានជំនួយ។
ឧបករណ៍នេះអនុលោមតាមផ្នែកទី 15 នៃច្បាប់ FCC ។ ប្រតិបត្តិការគឺស្ថិតក្រោមលក្ខខណ្ឌពីរដូចខាងក្រោមៈ
- ឧបករណ៍នេះប្រហែលជាមិនបង្កឱ្យមានការជ្រៀតជ្រែកដែលបង្កគ្រោះថ្នាក់ និង
- ឧបករណ៍នេះត្រូវតែទទួលយកការជ្រៀតជ្រែកណាមួយដែលទទួលបាន រួមទាំងការជ្រៀតជ្រែកដែលអាចបណ្តាលឱ្យប្រតិបត្តិការដែលមិនចង់បាន។
The equipment complies with the FCC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated wiwith a nimum distance of 20cm between the radiator and your body.
សេចក្តីថ្លែងការណ៍នៃការប៉ះពាល់នឹងវិទ្យុសកម្ម FCC
The equipment complies with the FCC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated witha minimum distance of 20cm between the radiator and your body
ឯកសារ/ធនធាន
 |
OTTOCAST CarPlay and Android Auto [pdf] សៀវភៅណែនាំអ្នកប្រើប្រាស់ CarPlay and Android Auto, Android Auto, Auto, CarPlay |