Mitel Performance Analytics Engineering 2.1
លក្ខណៈបច្ចេកទេស
- ផលិតផល៖ Mitel Performance Analytics
- ចេញផ្សាយ៖ 3.6
- Engineering Guidelines Release Date: ថ្ងៃទី 19 ខែវិច្ឆិកា ឆ្នាំ 2025
ព័ត៌មានអំពីផលិតផល
Mitel Performance Analytics is a fault and performance management system designed to provide users with fast actionable problem resolution to maintain optimal service quality levels for end customers. It offers real-time alerts, detailed reporting, and secure remote access.
ការណែនាំ
- Mitel Performance Analytics is a fault and performance management system designed to provide users with fast actionable problem resolution so that optimal service quality levels are maintained for end customers.
- Mitel Performance Analytics provides real-time alerts, detailed reporting and ubiquitous accessibility with secure remote access.
DOCUMENT PURPOSE AND INTENDED AUDIENCE
- This document is intended for Mitel Performance Analytics deployments where the software is installed on a server in the customer network.
- For Mitel Performance Analytics Software as a Service (SaaS) deployments, where the software is hosted in the cloud, refer to the Mitel Performance Analytics online help.
- This document provides guidelines and requirements to help customer plan Mitel Performance Analytics installations.
- For a complete description of Mitel Performance Analytics, refer to the Mitel Performance Analytics online help.
ប្រវត្តិនៃការពិនិត្យឡើងវិញ
DOCUMENT DATE DESCRIPTION
November 19, 2025 Mitel Performance Analytics R3.6 GA
MITEL PERFORMANCE ANALYTICS OVERVIEW
ស្ថាបត្យកម្ម
Mitel Performance Analytics consists of a number of web services running on either a cloud-hosted computing platform or on-premises computing platform. There are several components toMitel Performance Analytics. The remote ‘Probe’ installed in non-Internet accessible networks maintains databases of status and events, and provides a web portal with access security. Additionally, Mitel Performance Analytics has a Remote Access Service that provides a secure “cross-connect” for remote access to the customer network.
The various Mitel Performance Analytics components can run on a single or multiple servers, depending on capacity requirements.
MITEL PERFORMANCE ANALYTICS SERVER INSTALLATION REQUIREMENTS
MITEL PERFORMANCE ANALYTICS SYSTEM NAME, DOMAIN AND IP ADDRESS
Before you start the installation you must have the IP address and a name for the Mitel Performance Analytics server.
ធានាថា៖
- You have chosen a name for the Mitel Performance Analytics server; for example, mpaserver.
- You know the domain name, for example company.com, that you want to use for the Mitel Performance Analytics server. If you do not want to use your company’s domain name, you can use a domain name such as mycompany.net.
- The server name and domain name are combined to provide the Fully Qualified Domain Name (FQDN) for the Mitel Performance Analytics server. In the previous example, the FDQN is mpaserver.mycompany.net.
- You have the required IP address information, as follows:
- A static IP address for the Mitel Performance Analytics server; for example, 10.0.5.75 ។
- The Network Mask; for exampលេ 255.255.255.0 ។
- The gateway IP address (for example, 10.0.5.1) and the DNS server IP addresses (for example, 8.8.8.8 និង 8.8.4.4)។
- Your DNS system is configured so that the Mitel Performance Analytics server FQDN resolves to the static IP address of the Mitel Performance Analytics server; for example, mpaserver.mycompany.net resolves to 10.0.5.75.
EMAIL SERVER INFORMATION
Mitel Performance Analytics can send alerts and reports using an SMTP server.
Ensure you have the following information to configure the email server:
- SMTP server name or address; for exampឡេ smtp.gmail.com
- SMTP server port number; typically 25, 465 or 587.
- From email address: When Mitel Performance Analytics generates an email, it displays this email address as the originator.
- Reply-to email address: Replies to a Mitel Performance Analytics-generated email are sent to this email address.
- SMTP encryption; yes or no
- SMTP authentication; yes or no
- STMP username and password (for authentication, if required)
RECOMMENDED SERVER CAPACITY REQUIREMENTS
- The Mitel Performance Analytics server software is provided as a VMware OVA. Mitel Performance Analytics supports OVAs installed on VMware ESXi versions 6.0 and later.
- This is a virtual machine image that contains an Ubuntu 22.04 Linux server with the Mitel Performance Analytics server application, a Mitel Performance Analytics Probe, and middleware (for example, Java, Postgres, Apache Tomcat and Nginx).
- The resource requirements for Mitel Performance Analytics depend on the number of devices being monitored. The following table describes the recommended virtual hardware based on the number of devices being monitored by Mitel Performance Analytics.
| NO. OF MONITORED DEVICES | ស៊ីភីយូ | RAM | ឌីស |
| រហូតដល់ 50 | 2 virtual CPUs, each vCPU operating at 1.5 GHz | ០១៤៨៦០៧៤-០០៤
GB |
70 ជីកាបៃ |
| ២៩ ដល់ ៣៨ | 4 virtual CPUs, each vCPU operating at 1.5 GHz | ០១៤៨៦០៧៤-០០៤
GB |
70 ជីកាបៃ |
| ច្រើនជាង 100 | Contact support for engineering assistance | ||
សំខាន់៖
If you experience slowness with your Mitel Performance Analytics environment and the CPU utilization is sustained above 60%, you need to increase the number of virtual CPUs in your environment.
PROBE INSTALLATION REQUIREMENTS
- Mitel Performance Analytics requires a Probe to monitor devices. The Probe enables communication between Mitel Performance Analytics and the customer network. It also acts as a data collector between Mitel Performance Analytics and the monitored devices. The monitored devices send their data to the Probe which then relays it to Mitel Performance Analytics.
- For users that have Mitel Performance Analytics installed on premise with their equipment, your installation already contains a Probe and additional Probes can be installed if required.
- For service providers that have Mitel Performance Analytics installed in their data center, your installation already contains a Probe. However, you can install more Probes. Typically, each additional Probe monitors a particular customer.
- For cloud-based users, you must install a Probe as part of your configuration.
- Mitel Performance Analytics provides Probe installers for Windows, installation as a blade on a Mitel MSL or MiCollab server, and installation as a virtual appliance.
HOST REQUIREMENTS
The Probe software is designed to be lightweight and to impose minimal host requirements. The Probe(s) are configured based on your Mitel Performance Analytics system requirements.
- For up to 10 monitored MiVoice Business or MiVoice Border Gateway devices, you can use the pre-configured Martello Appliance or the Linux Hardware Probe configured on a Raspberry Pi device.
- For other devices with basic monitoring requirements such as routers and switches, the Martello Appliance can support up to 50 devices.
- If there are more than 10 monitored devices, a virtual appliance with a minimum of 2 GB of RAM is required. Contact Mitel for engineering guidelines.
PROBE CAPACITY
- For users that have Mitel Performance Analytics installed on-site with their equipment, the Probe that is provided with your installation can monitor approximately 100 devices, assuming the monitored network consists of a variety of devices.
- For service providers that have Mitel Performance Analytics installed in their data center, the system Probe that is provided with your installation can monitor approximately 100 devices, assuming the monitored network consists of a variety of devices. Only 10 of these devices can be MiVoice Business or MiVoice Border Gateway devices.
- សម្រាប់អតីតample, in a cloud-based deployment, a single Probe can monitor a medium sized network consisting of five routers and 10 MiVoice Business devices with automatic backup and SMDR gathering enabled.
LAN CONNECTIVITY REQUIREMENTS
To provide monitoring and remote access, the Probe must be able to connect to the LAN devices.
The Probe uses the following IP protocols to communicate to devices it is monitoring:
| កម្មវិធី | IP PROTOCOL AND PORT | IP SESSION SOURCE | IP SESSION DESTINATION |
| SNMP /Performance | UDP, port 161 | ស៊ើបអង្កេត | ឧបករណ៍ |
| SNMP | UPD, port 162 | ឧបករណ៍ | ស៊ើបអង្កេត |
| HTTPS /Performance | TCP, port 443 | ស៊ើបអង្កេត | Mitel Performance Analytics |
| HTTPS | TCP, port 80 | ស៊ើបអង្កេត | ការិយាល័យ MiVoice 250 |
| MiXML | TCP, port 443 | ស៊ើបអង្កេត | MiVoice Business and MiVoice Business EX |
| SMDR | TCP, port 1752 | ស៊ើបអង្កេត | MiVoice Business and MiVoice Business EX |
| SIP Endpoint Voice Quality | UDP, port 5160 (configurable) | SIP End point | ស៊ើបអង្កេត |
| MiVoice Border Gateway Integration | UDP, port 26262 | ច្រកព្រំដែន MiVoice | ស៊ើបអង្កេត |
| MiVoice Border Gateway Integration | UDP, port 25252 | ច្រកព្រំដែន MiVoice | ស៊ើបអង្កេត |
| ការធ្វើតេស្តបណ្តាញ | Outgoing, any port Incoming or Probe or SIP Device, port 5060 | ស៊ើបអង្កេត | Probe or SIP Device |
| MiVoice Office 250 / Message Print | TCP, ports 4000, 44000 | ស៊ើបអង្កេត | ការិយាល័យ MiVoice 250 |
| ការិយាល័យ IP របស់ Avaya | TCP, port 50802 and ports in the range 50804 to 50813 (defaults, actual ports may range between 49152 and 65289 depending on IP Office services base port)UDP, ports 50794, 50798 | ស៊ើបអង្កេត | ការិយាល័យ IP របស់ Avaya |
| PathSolutions | TCP, port 8084 (default) | ស៊ើបអង្កេត | PathSolutions |
| បម្រុងទុក | TCP, port 21 | ស៊ើបអង្កេត | អាជីវកម្ម MiVoice |
| SSH /Performance | TCP, port 22 | ស៊ើបអង្កេត | ឧបករណ៍ |
| Ping / Availability | ICMP Echo | ស៊ើបអង្កេត | ឧបករណ៍ |
ចំណាំ៖ Some of the ports listed in this table are used by multiple devices. The device configuration determined the protocols and ports that are used. For example, if an MX-ONE device is configured to use SNMP, then UDP, port 161 is used. If MX-ONE is also configured for SSH, TCP port 22 is also used.
OTHER PROTOCOLS AND PORTS
If the Probe is used for remote access, the Probe must have network connectivity to the LAN devices for the appropriate TCP/IP protocol and port used by the remote application. Ports 443 and 50000 must be available to support remote access.
RECEIPT OF SNMP TRAPS
- To receive SNMP traps, the Probe must receive the SNMP packets. These are sent by default on port 162.
- The Probe attempts to bind to port 162. If it cannot, it binds to port 1162 instead.
- The Probe Status panel shows the port that the Probe has bound to. To access the Probe Status panel, select Status under the Network Tools menu for the Probe dashboard.
ចំណាំ៖ ទៅ view the Probe Status panel, ensure that the Collect Probe Status option is enable in the Probe Settings. See “Probe Settings Configuration” on page 1.
The following is a typical Probe Status panel:
To ensure receipt of traps, configure the trap sender to send traps on the port the Probe has bound to.
តម្រូវការការតភ្ជាប់អ៊ីនធឺណិត
- For remote monitoring, the Probe must have continuous network access to the devices to be monitored and must have Internet access for HTTP/TLS on port 443 to the Mitel Performance Analytics server.
- For other, optional services, the Probe connects to either customer specified servers (for file transfer) or to Mitel Performance Analytics servers for Mitel Performance Analytics cloud storage or Remote Access.
- Note that the Probe always initiates IP connections; that is, all connections are outbound.
| ប្រូតូកូល OR កម្មវិធី | IP ប្រូតូកូល AND PORT | IP SESSION INITIATOR | គោលដៅ | មតិ |
| HTTPS | TCP,port 443 | ស៊ើបអង្កេត | Mitel Performance Analytics server(s) | Required for Remote Monitoring. |
| HTTPS | TCP,port 443 | ស៊ើបអង្កេត | Mitel Performance Analytics Cloud File server(s) | Optional, Required for Mitel Performance Analytics Cloud File ការផ្ទុក។ |
| FTP, FTPSImplicit | TCP, port 21 | ស៊ើបអង្កេត | Customer- defined File server(s) | Optional, used for SMDR file ផ្ទេរ។ |
| SFTP | TCP, port 22 | ស៊ើបអង្កេត | Customer- defined File ម៉ាស៊ីនមេ | Optional, used for SMDR file ផ្ទេរ។ |
| FTPSExplicit | TCP,port 990 | ស៊ើបអង្កេត | Customer- defined File ម៉ាស៊ីនមេ | Optional, used for SMDR file ផ្ទេរ។ |
| SSH | TCP,port 50000 | ស៊ើបអង្កេត | Mitel Performance Analytics server(s) | Required for Remote Access. |
| DNS | TCP and UDP,port 53 | ស៊ើបអង្កេត | ម៉ាស៊ីនមេ DNS | Required to resolve host names or URLs to IP addresses. |
| NTP | UDP,port 123 | ស៊ើបអង្កេត | ម៉ាស៊ីនមេ NTP | Required to synchronize Probe system time. |
MITEL PERFORMANCE ANALYTICS OPERATIONAL REQUIREMENTS
កម្មវិធីរុករកដែលគាំទ្រ
User access to Mitel Performance Analytics requires the use of a Web browser with JavaScript enabled.
Mitel Performance Analytics is officially supported on:
- Firefox, Release 55.0 and later
- Chrome, Release 60.0* and later
- Edge, Release 79.0 and later
Mitel Performance Analytics does work on Microsoft Edge, Releases 16 to 18; however, it is not officially supported. Mitel Performance Analytics Mitel Performance Analytics does not work on Release 15 of Edge.
- ចំណាំ៖ While Mitel Performance Analytics may work on most standards compliant browsers, such as Safari and Opera, Mitel can only commit to resolving issues with specifically tested and supported browsers.
- សំខាន់៖ Your browser cache must be cleared completely whenever Mitel Performance Analytics is upgraded to a new release version.
MiVoice 5000 is not currently supported on Chrome or Edge.
LICENSING AND UPGRADE SUPPORT
In order to receive licensing and upgrade support the Mitel Performance Analytics server must be able to access the following URLs:
- For online licensing – lass.mpaservice.net:443 (optional but recommended for MPA+)
- For analytics – mitel.mpaservice.net:443 (ជាជម្រើស ប៉ុន្តែបានណែនាំ)
- For online upgrades – packages.martellotech.com:443
- For Ubuntu Linux updates – security.ubuntu.com:80
vmware
Mitel Performance Analytics supports OVAs installed on VMware ESXi versions 6.0 and later.
FTP SERVERS
Mitel recommends that you avoid using the FreeFTPd server due to known issues and limitations with that product.
កូដដែលបានគាំទ្រ
- Codecs are used for encoding and decoding the voice path within the Mitel network and play a role in determining call voice quality .
- Mitel Performance Analytics supports the following codecs.
| កូដឌិក | IE(IMPAIRMENT FACTOR OF CODEC COMPRESSION) | BPL(PACKET LOSS ROBUSTNESS FACTOR) | ពន្យាពេល | ក្រុមតន្រ្តី |
| G.711 mu-LawG.711 A-Law | 0 | 4.3 | 0.125ms | ក្រុមតូចចង្អៀត |
| G.729 G.729A G.729BG.729AB | 10 | 19 | 20 ms | ក្រុមតូចចង្អៀត |
| 7.222.1 | 13 | 7.1 | 40 ms | រលកធំ |
| 7.222 | 13 | 4.8 | 4 ms | រលកធំ |
| iLBC | 11 | 32 | 20 ms | ក្រុមតូចចង្អៀត |
| Opus | 20.8 | 17.6 | 26.5 ms | រលកធំ |
- If a codec is not recognized by Mitel Performance Analytics the values for the G.711 codec are used.
- For details on how codecs affect voice quality R values, refer to the “Voice Quality for Voice over IP Technical Background” topic in the Mitel Performance Analytics Online Help.
© Copyright 2025, Martello Technologies Corporation. All Rights Reserved.
- ពាក្យ និងនិមិត្តសញ្ញា Mitel គឺជាពាណិជ្ជសញ្ញារបស់ក្រុមហ៊ុន Mitel Networks Corporation។
- Any reference to third party trademarks are for reference only and Mitel makes no representation of the ownership of these marks.
សេចក្តីជូនដំណឹង
- The information contained in this document is believed to be accurate in all respects but is not warranted by Mitel Networks™ Corporation (MITEL®). Mitel makes no warranty of any kind with regards to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The information is subject to change without notice and should not be construed in any way as a commitment by Mitel or any of its affiliates or subsidiaries. Mitel and its affiliates and subsidiaries assume no responsibility for any errors or omissions in this document. Revisions of this document or new editions of it may be issued to incorporate such changes.
- គ្មានផ្នែកនៃឯកសារនេះអាចត្រូវបានផលិតឡើងវិញ ឬបញ្ជូនតាមទម្រង់ណាមួយ ឬដោយមធ្យោបាយណាមួយឡើយ - អេឡិចត្រូនិក ឬមេកានិច - សម្រាប់គោលបំណងណាមួយដោយគ្មានការអនុញ្ញាតជាលាយលក្ខណ៍អក្សរពីសាជីវកម្ម Mitel Networks ។
ពាណិជ្ជសញ្ញា
ពាណិជ្ជសញ្ញា សញ្ញាសេវាកម្ម ឡូហ្គោ និងក្រាហ្វិក (ជារួម “ពាណិជ្ជសញ្ញា”) ដែលបង្ហាញនៅលើគេហទំព័រអ៊ីនធឺណែតរបស់ Mitel ឬនៅក្នុងការបោះពុម្ពផ្សាយរបស់វាត្រូវបានចុះបញ្ជី និងមិនបានចុះបញ្ជីពាណិជ្ជសញ្ញារបស់ក្រុមហ៊ុន Mitel Networks Corporation (MNC) ឬក្រុមហ៊ុនបុត្រសម្ព័ន្ធរបស់ខ្លួន (ជាសមូហភាព “Mitel”) ឬផ្សេងទៀត។ ការប្រើប្រាស់ពាណិជ្ជសញ្ញាត្រូវបានហាមឃាត់ដោយគ្មានការយល់ព្រមភ្លាមៗពី Mitel ។ សូមទាក់ទងផ្នែកច្បាប់របស់យើងនៅ legal@mitel.com សម្រាប់ព័ត៌មានបន្ថែម។ សម្រាប់បញ្ជីនៃម៉ាកយីហោ Mitel Networks Corporation ដែលបានចុះបញ្ជីទូទាំងពិភពលោក សូមយោងទៅ webគេហទំព័រ៖ http://www.mitel.com/trademarks.
- © Copyright 2025, Martello Technologies Corporation
- រក្សាសិទ្ធិគ្រប់យ៉ាង
- Mitel Performance Analytics Engineering Guidelines
- Release 3.6 – November 19, 2025
សំណួរគេសួរញឹកញាប់
What is Mitel Performance Analytics?
Mitel Performance Analytics is a fault and performance management system providing real-time alerts and detailed reporting for optimal service quality.
Where can I find the complete description of Mitel Performance Analytics?
For a detailed description, refer to the Mitel Performance Analytics online help.
ឯកសារ/ធនធាន
 |
Mitel Performance Analytics Engineering 2.1 [pdf] ការណែនាំអ្នកប្រើប្រាស់ Release 3.6, Performance Analytics Engineering 2.1, Analytics Engineering 2.1, Engineering 2.1, 2.1 |