MIBOXER SPIB5 5 in 1 SPI Plus DMX LED Controller

លក្ខណៈបច្ចេកទេស

• ឈ្មោះផលិតផល៖ 5 in 1 SPI+DMX LED Controller (BLE+2.4G)
• លេខម៉ូដែល៖ SPIB5
• អត្រា IP: IP20
• បញ្ចូលវ៉ុលtage: DC 5V-24V
• សីតុណ្ហភាពការងារ៖ -10 ~ 40 ° C
• ទិន្នផលបច្ចុប្បន្ន៖ អតិបរមា 10A
• វិមាត្រ៖ 74.5 * 36 * 17 មម
• សញ្ញាទិន្នផល៖
  • SPI(TTL) 800Kbps (Max 1024 Pixel)
  • DMX៖ 250Kbps (Max 256 Pixel)
• រង់ចាំបច្ចុប្បន្ន៖ 20 mA
• ពិធីសារៈ BLE+RF 2.4GHz
• វិញ្ញាបនប័ត្រ៖ CE, EMC, LVD, ក្រហម

ការណែនាំអំពីការប្រើប្រាស់ផលិតផល

SPI Mode Installation

• For SPI LED Strips, follow the SPI Installation Diagram provided. Ensure proper connections and power input within the specified range.

DMX Mode Installation

• For DMX LED Strips, follow the DMX Installation Diagram provided. Make sure to connect as per the instructions and input the correct power supply voltage.

Smart Phone APP Control

1. Download and install the TUYA SMART APP from the application store.
2. បណ្តាញផ្គូផ្គង៖
   • Connect the controller to the mains and ensure the indicator is flashing quickly.
   • You can correct the indicator status by long-pressing the SET button or powering off and on the controller 6 times.
   • Connect your phone to a 2.4GHz home wifi network.
   • Open the TUYA SMART APP, click on “Lighting and Light source (BLE+Wifi)” and follow the on-screen instructions to complete the pairing process.

លក្ខណៈផលិតផល

• Support BLE+2.4GHZ wireless transmitting technology
• 5 in 1 SPI controller, single color, cct, rgb, rgbw, rgb+cct output selection
• Speed, static mode, dynamic mode, and music mode are adjustable
• Dual SPI/DMX control protocol, compatible with DC5-24V input
• Dynamic mode: 28 kinds of white color and 80 kinds of RGB color for selection, it can change color, brightness, width, and speed for those modes
• 8 kinds of music modes work with the internal microphone and the smartphone microphone
• Freely switching between dynamic mode and music mode
• Setting up boot animation via TUYA APP
• Have DND mode, usually used in a power failure area, to save power

ប៉ារ៉ាម៉ែត្រផលិតផល

វិមាត្រ

ដ្យាក្រាមតភ្ជាប់

ដ្យាក្រាមពាក្យសុំ

ពីចម្ងាយដែលត្រូវគ្នា។

( purchase separately)

ភ្ជាប់/ផ្ដាច់

1. តំណភ្ជាប់
   1. Power off for 10 seconds and power on again, or short-press “SET”
   2. Press the ” ON” button 3 times within 3 seconds.
   3. Green flashing state, then the code is successful.
      • តំណបរាជ័យប្រសិនបើពន្លឺមិនភ្លឺ។ សូមធ្វើជំហានខាងលើម្តងទៀត
      • យកចិត្តទុកដាក់៖ can not link again if the remote has already finished linking.

ផ្ដាច់

1. Power off for 10 seconds and power on again, or short-press “SET”
2. Press the “ON” button 5 times within 3 seconds.
3. Red flashing state, then clear the code successfully.
   • Unlink is failed if the light doesn’t flash, please repeat the above steps
   • (យកចិត្តទុកដាក់៖ no need to unlink if the light is never be linked)

Smart Phone APP Control

Pairing Network (doesn’t support 5G router)

1. Download and install the “TUYA SMART” APP
   • Search “TUYA SMART” in the application store or scan the QR code. Please register an account if using it for the first time, log in to your account if you already have account
2. បណ្តាញផ្គូផ្គង
   • Connect the controller to the mains
   • Ensure indicator flashes quickly 2 times per seconds)
   • You have 2 ways to correct the indicator status
   • Long-press press” SET” button
   • Power off and power on the controller 6 times
   • Connect the phone with the home Wi-Fi 2.4 GHz network
   • Open the APP interface, click “+”
   • Click “Lighting” and “Light source (BLE+Wifi)
   • Complete the rest steps

ការណែនាំអំពីមុខងារ

របៀបឋិតិវន្ត

Adjust or save pure static illumination

• សម្រាប់អតីតample, regarding as App

Dynamic Mode ( select it via remote)

• 28 kinds of white color, 80 kinds of RGB color, save favorite modes, and 8 scenes mode, all modes can change color, brightness, width, and speed

របៀបតន្ត្រី

• 8 kinds of music modes work with the internal microphone andthe  smart smartphone microphone

Setting Communication Protocol

• Setting it via APP
• Select SPI or DMX protocol

Setting the LED strip light

• Change output based on different LED strip lights like single color, CCT, RGB, RGBW, rgb+cct
• LED strip light types

Setting Pixel points

• Setting it via a program
• Slip the slider to change numbers

ការក្រិតតាមខ្នាតពណ៌

• Correct the color of led strip light via APP
• Following the tip to complete color calibration

ចាប់ផ្ដើមចលនា

• Setting color or color temperature, speed and brightness

មុខងារកំណត់ម៉ោង

Setting it via APP

របៀប DND បើក/បិទ

• Turn on DND mode ( usually used in power failure areas to save power)

ការណែនាំអំពីការគ្រប់គ្រងសំឡេង Alexa

• Please add the device to the [Tuya Smart] app, then start following the steps.
  1. បើកកម្មវិធី Alexa
  2. ចុច "ច្រើនទៀត" នៅផ្នែកខាងក្រោមនៃជ្រុងខាងស្តាំ
  3. ចុច "ជំនាញ និងហ្គេម"
  4. ចុច “"នៅជ្រុងខាងស្តាំខាងលើ
  5. Type “Smart Life” and search
  6.  Click the “Smart Life” skill, follow the instructions to finish the configuration, and start voice control

ការណែនាំអំពីការគ្រប់គ្រងសំឡេង Google Home

សូមបន្ថែមឧបករណ៍ទៅកម្មវិធី [Tuya Smart] បន្ទាប់មកចាប់ផ្តើមធ្វើតាមជំហាន

1. បើកកម្មវិធី Google Home
2. Click “+” on the top left corner
3. ចុច "ដំឡើងឧបករណ៍"
4. ចុច "ធ្វើការជាមួយ Google"
5. ចុចនៅជ្រុងខាងស្តាំខាងលើ
6. Type “Smart Life” and search
7. Click the “Smart Life” skill, follow the instructions to finish the configuration, and start voice control

ការយកចិត្តទុកដាក់

1. សូមបិទការផ្គត់ផ្គង់ថាមពលមុនពេលដំឡើង។
2. សូម​ប្រាកដ​ថា​ការ​បញ្ចូល​វ៉ុលtage ដូចគ្នាទៅនឹងតម្រូវការពីឧបករណ៍។
3. Don’t disassemble the device if you are not an expert; otherwise, you will damage it.
4. Please do not use the light in places with a wide range of metal areas or strong electromagnetic waves nearby, otherwise, the remote distance will be seriously affected.

សំណួរដែលសួរញឹកញាប់

Can I control both SPI and DMX LED strips with this controller?

Yes, this controller supports both SPI and DMX LED strips. Follow the installation diagrams provided for each mode accordingly.

What is the maximum control distance for this LED controller?

The control distance for this LED controller is up to 30 meters.

ឯកសារ/ធនធាន

MIBOXER SPIB5 5 in 1 SPI Plus DMX LED Controller [pdf] សៀវភៅណែនាំរបស់ម្ចាស់ SPIB5, C9, SPIB5 5 in 1 SPI Plus DMX LED Controller, SPIB5, 5 in 1 SPI Plus DMX LED Controller, SPI Plus DMX LED Controller, DMX LED Controller, LED Controller, Controller

ឯកសារយោង

• សៀវភៅណែនាំអ្នកប្រើប្រាស់