NZXT H1 Mini-ITX Case with PSU, AIO, and Riser Card

Product Overview

The NZXT H1 is a compact Mini-ITX case designed for high-performance builds, integrating a 750W SFX Gold power supply, a 140mm All-In-One (AIO) liquid cooler, and a PCIe Gen 4 riser card.

Components

The NZXT H1 case includes the following main components:

• 1. Top Cover: The uppermost panel of the case.
• 2. Right Side Filter: Filter for air intake on the right side.
• 3. Left Side Filter: Filter for air intake on the left side.
• 4. Front Tempered Glass Panel: The front panel made of tempered glass.
• 5. Rear Panel: The rear section of the case.
• 6. Chassis: The main frame structure of the case.
• 7. Liquid Cooler Bracket: Mount for the AIO liquid cooler.
• 8. 140mm AIO Liquid Cooler: Integrated liquid cooling solution for the CPU.
• 9. SFX 750W PSU: Integrated 750 Watt SFX form factor, fully modular, 80 Plus Gold certified power supply.
• 10. Toolless SSD Tray: Easy installation tray for 2.5'' SSDs.
• 11. PCIe Extender Cable: PCIe Gen 4 compatible riser cable for graphics cards.
• 12. Styrofoam Component Holder: Packaging material that can also serve as a temporary component holder.
• 13. Fan Controller: Manages fan speeds.
• 14. 92mm Fan: Fan for component cooling, typically for the GPU.
• 15. AC Power Cord Extender: Extension for the AC power cable.
• 16. 20+4-Pin ATX Power Cable: Main power cable for the motherboard.
• 17. 4+4-Pin CPU Power Cable: Additional power cable for the CPU.
• 18. 6+2-Pin PCIe Power Cable: Power cable for graphics cards.
• 19. SATA Power Cable: Power cable for storage devices and other peripherals.

Included accessories consist of various screws (A: 6-32 x 5mm), cable ties (B), AC power cord (C), CPU socket mounting hardware for Intel (D, E, F, G) and AMD (H, I, J, K), and plastic washers (K).

Clearances and Specifications

Key specifications for component compatibility:

Installation Steps

The installation process involves several key steps:

1. Panel Removal: Access internal components by removing the case panels.
2. Motherboard Installation: Prepare the motherboard tray by installing standoffs (E or G) and the appropriate backplate (D or F) for Intel sockets (1200/115X or 1700). Then, carefully place and secure the motherboard onto the standoffs.
3. Water Block Installation: Mount the AIO liquid cooler's water block onto the CPU, using the correct retention bracket and screws for Intel or AMD sockets. Ensure tubes are oriented correctly.
4. Power Supply and Cable Connections: Connect the integrated SFX 750W PSU cables to the motherboard (20+4-pin ATX, 4+4-pin CPU), graphics card (6+2-pin PCIe), and storage devices (SATA).
5. Expansion Card Installation: Install the graphics card using the PCIe riser cable.
6. SSD Drive Installation: Mount SSDs into the toolless SSD tray.
7. Fan Controller Connection: Connect the fan controller to the motherboard and fans.
8. Final Connections: Connect the AC power cord to the PSU and a wall outlet, then power on the system.

Note: Always refer to the detailed diagrams in the original manual for precise placement and connection of components.

Power Supply Specifications (C750 Gold mini)

The integrated power supply is an SFX 750W Gold unit with the following specifications:

• Type: Switching Power Supply
• Rating: 100V-240V, 12A-6A, 50Hz-60Hz
• Fan: 92mm FDB Silent Fan
• Certification: 80 Plus Gold
• AC Input: Full Range
• Operating Temperature: 0-40 °C
• MTBF: 100,000 hours (excluding fan at 25 °C)
• Protections: OVP, UVP, OPP, SCP, OCP, OTP
• DC Output: +3.3V (20A), +5V (20A), +12V (62.5A), +5Vsb (2.5A), -12V (0.3A)
• Max Output Power: 750W

Warranty and Support

NZXT offers a global warranty policy. For the H1 case, this includes a 3-year warranty on the case, riser card, and AIO cooler, and a 10-year warranty on the PSU.

For technical support, warranty service, or to obtain replacement parts, please contact NZXT:

• Website: nzxt.com/customer-support
• Email: service@nzxt.com
• General Information: nzxt.com

Proof of purchase is required for warranty service. Please retain your receipt or invoice.

Safety Information

Caution: Electric Shock Hazard!

• Always follow manufacturer instructions and safety warnings during installation.
• Do not open the power supply unit; it contains no user-serviceable parts.
• Use the product indoors only and avoid water, high temperatures, or high humidity environments.
• Do not install near heat sources or insert objects into ventilation openings.
• Do not modify cables or connectors. Use only manufacturer-provided modular cables.
• Be careful when connecting the 24-pin main power connector; the detachable 4-pin connector is not a P4 or ATX 12V connector.
• Failure to comply with safety instructions voids all warranties.

Regulatory Compliance

The NZXT H1 complies with Part 15 of the FCC Rules and CAN ICES-3 (B) / NMB-3 (B).

Designed in Los Angeles, California. Made in China.