S-TRACK OSTRICH XDI22

Preface

Thank you for choosing the S-TRACK OSTRICH XDI22. This device interfaces analog audio inputs with Dante network channels, utilizing Power over Ethernet (PoE) for power supply.

Caution

For reliable use and safety, observe the following during installation, use, and maintenance:

• Ensure proper grounding of the power line and chassis.
• Maintain good ventilation to prevent overheating.
• Turn off power when not in use for extended periods or in humid environments.
• Disconnect power before removing/reinstalling parts or connecting/disconnecting cables.
• Do not disassemble or attempt unauthorized repairs to avoid electric shock and further damage.
• Avoid spilling corrosive chemicals or liquids near the equipment.

Product Introduction

The OSTRICH XDI22 is an audio interface device based on the Dante protocol. It converts analog audio signals into digital format, routing them through the Dante network to compatible devices. It offers high-quality, low-latency, and robust networking capabilities, bridging analog audio equipment with networked audio systems using high-quality AD/DA conversion chips.

Functions

• Supports two analog audio signal inputs and two Dante network audio signal outputs.
• Features two XLR female connectors for analog audio inputs.
• Includes one RJ45 network interface for Dante audio signal transmission via a PoE Switch.
• Converts analog audio signals to Dante network audio signal output.
• Displays the device name and IP address.
• Supports 802.3af and 802.3at PoE power supply standards.
• Facilitates simple audio routing configuration through Dante Controller software.

Specifications

Input Interface: 2-channel three-pin XLR female connector

Output Interface: 1 RJ45, transmitting 2 channels of Dante network audio

Power Consumption: <1W

Maximum Signal Level (Balanced): 18dBu

Frequency Response: 20Hz~20KHz, ±0.5dB

Impedance: 20KΩ(Balanced), 10KΩ(Unbalanced)

Dynamic Range: >100dB

Signal-to-Noise Ratio: >100dB

THD+N: <0.003%@4dBu, 1KHz

Power Supply: 802.3af, 802.3at Standard POE switch

Sampling Rate: 48kHz

Bit Depth: 24-bit

Operating Temperature: -10℃~+40℃

Operating Humidity: 5%~95%RH, No condensation

Dante Device Latency: 1, 2 or 5ms (Configurable using Dante Controller)

Network Transmission: Dante IP/AES67/RTP Audio

Noise Floor: -90dBu

Product Dimensions (L×W×H): 98mm×72mm×40mm

Weight: 0.2kg

Package Dimensions (L×W×H): 145mm×145mm×80mm

Package Weight: 0.3kg

Interface Description

The device features:

• 1: Dante network interface with POE supply.
• 2: Analog Input CH1.
• 3: Analog Input CH2.
• 4: Display showing the IP address.

Dante Network Audio Routing

Setting up audio routing in a Dante network requires the Dante Controller software. This software enables 1-to-1 and 1-to-N mapping operations from input to output within the Dante network.

Note:

• Dante requires a reliable and secure wired network environment; it does not function over Wi-Fi.
• Dante Controller software is compatible with Windows 7, 10, 11, and macOS. Select the appropriate version for your system.

Download the official Dante Controller software from: Audinate Dante Controller.

Warranty Regulations

The warranty period for this product is 1 year. Non-man-made damage within this period is covered by a three-package service.

The warranty card must be stamped by the sales unit; alterations are invalid.

Conditions not covered by the warranty include:

• Missing warranty card or valid invoice, or expired validity period.
• Non-compliance with product instructions for use, maintenance, or management.
• Product model or code mismatch between the warranty voucher and the physical goods.
• Damage caused by unauthorized dismantling or repair.
• Normal wear, tear, discolouration, or consumption during use.
• Issues arising from the user's own network configuration. Consult customer service for network-related problems.