Masterplug 24 Hour Mechanical Timer - POWER
Control your plug-in devices with a manual override option
Features
- 24 hour mechanical segment timer
- Ideal for indoor power applications
- Simple to use
- Manual override
- 15 mins per segment
Product Images
Image 1: Shows the Masterplug TMS24 24-hour mechanical timer unit, a white plastic device with a dial and segments. Image 2: Shows the Masterplug TMS24 timer plugged into a standard UK wall socket, with a plug inserted into the timer.
Line Drawing
A technical drawing illustrating the dimensions of the timer. Key dimensions shown are: Height 100.5mm, Width 62mm, Depth 63mm. The drawing also shows the timer face with numbered segments representing 15-minute intervals, a grey marker, and a switch for timer function/manual override. The drawing indicates a 24H symbol.
Product Information
| Part Number | TMS24 |
|---|---|
| Product Dimensions | Height 100.5mm x Width 62mm x Depth 63mm |
| Sockets | 1 |
Technical Specifications
| Standard(s) | This product is certified to applicable British safety standards EN60730-2-7 |
|---|---|
| Maximum Load | 13(2)A, 3120 Watts (2AX Inductive Load) |
Environmental Protection
This symbol ?️ is known as the 'Crossed-out Wheelie Bin Symbol'. When this symbol is marked on a product or battery, it means that it should not be disposed of with your general household waste. Some chemicals contained within electrical/electronic products or batteries can be harmful to health and the environment. Only dispose of electrical/electronic/battery items in separate collection schemes, which cater for the recovery and recycling of materials contained within. Your co-operation is vital to ensure the success of these schemes and for the protection of the environment.
Installation Instructions
IMPORTANT - PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USE AND KEEP FOR FUTURE REFERENCE.
Safety Warning
Always use in accordance with these safety instructions. If in doubt consult a qualified electrician or contact our Technical Support service.
- Do not exceed maximum load = 13(2)A, 3120 Watts (2AX Inductive Load)
- Always ensure the appliance plug is fully inserted into the timer socket
- Do not immerse in water. If cleaning is required, remove from the socket and wipe with a dry cloth.
- Do not use if damaged
- Do not use with high current devices, heaters or motors
- Do not use with energy saving bulbs
- Keep out of sight and reach of children
- For indoor use only
Operating Instructions
- Insert the timer into the required socket outlet, and then plug the appliance to be controlled into this timer.
- Push down the blue segments on the timer face corresponding to the desired operating time. (One segment = 15 minutes).
- Turn the disk clockwise →, following the direction of the arrows, until the grey marker is pointing at the current time.
- To activate the timer function, ensure that the switch on the side is down and so indicating the timer symbol ▶️.
- For manual override, to disable the timer function, move switch to the up position and so indicating the manual override symbol ⚙️.
- Maximum load = 13(2)A, 3120 Watts, 240 Volts (2AX Inductive Load).
DO NOT OVERLOAD THE TIMER