ULINE H-3760 H-Unit Slatwall Gondola Display Assembly Instructions

Model: H-3760

Contact: 1-800-295-5510 | uline.com

Tools Needed

Phillips Screwdriver ?
Rubber Mallet (optional) ?

Parts

Part	Quantity
Confirmat Screw	8
Camlock Pin	21
Pan Head Screw	24
Caster	6
Camlock	21
Dowel Pin	4
Screw Cap	8
Short Kick Base Board	2
Center Panel	2
Kick Base Top	1
Unfinished Kick Base Board	1
Long Kick Base Board	2
Wing Panel	2

Assembly Instructions

Kick Base Assembly

Set kick base top on a protective surface with the underside facing up.
Using a screwdriver ?, install camlock pins into predrilled holes in the kick base boards and the underside of the base top. (See Figure 1: Camlock Pin insertion)
Install camlocks into kick base boards by tapping them into position with the rubber mallet ?. Ensure the opening of the camlock faces outward and is fully seated. (See Figure 2: Camlock installation)
Align kick base boards so that each corner has camlock pins set into the camlocks of the adjacent board. Boards of the same length should be parallel to each other. The shortest, unfinished board should be placed in the center. (See Figures 3 & 4: Kick base board alignment)
Insert screwdriver ? into camlock and turn clockwise ↻ to lock. Repeat for all camlocks. (See Figure 5: Locking camlocks) ? Note: Tilt screwdriver at an angle while twisting to better lock the camlocks.

Casters Installation (Optional)

Position casters into the four outer corners and two into the center corners, with one caster on either side of the center kick base board. (See Figure 6: Caster placement)
To attach casters, screw four pan head screws per caster through holes in caster and into the predrilled holes inside the kick base boards. (See Figure 7: Attaching casters)

Center and Wing Panel Installation

Flip the kick base right side up.
Set the four dowel pins into the predrilled holes on the base top.
? Note: Two people are recommended for steps 3 through 6.
Set one wing panel onto two of the dowel pins. (See Figure 8: Panel attachment)
Set one center panel onto the base top and attach to wing panel by screwing confirmat screws through predrilled holes. Tighten screws with Phillips screwdriver ?. (See Figure 8: Panel attachment)
Set the second tier of the center panel on top of the first panel and secure to wing panel the same as step 4.
Set second wing panel onto dowel pins and secure to center panels by screwing confirmat screws through predrilled holes. Tighten screws with Phillips screwdriver ?. (See Figure 9: Assembled structure)
To cover the exposed screw heads, peel the decorative screw caps to expose the sticky back, and carefully center and cover the screw heads.
? Note: A black magic marker can be used to touch up any dings or nicks to the kick base boards. Clean with soft rags and water.

Models: H-3760, H-Unit Slatwall Gondola Display

File Info : application/pdf, 6 Pages, 1.61MB

IH-3760-SPFR

References

Adobe PDF Library 15.0 Adobe InDesign 14.0 (Macintosh)

Related Documents

	Uline H-3875BL Double-Sided Gondola Shelving - Assembly Guide This document provides assembly instructions and parts list for the Uline H-3875BL Double-Sided Gondola Shelving unit, a 4' island starter.
	ULINE H-3867 Economy Gondola Shelving Assembly Instructions Step-by-step assembly guide for the ULINE H-3867 Economy Gondola Shelving unit. Learn how to quickly and easily assemble your shelving system.
	ULINE WindPro Heavy Duty Snap Edge Sign Assembly and Sign Insertion Guide Comprehensive guide for assembling the ULINE WindPro Heavy Duty Snap Edge Sign (models H-7041, H-8546, H-8547) and instructions for inserting signs. Includes parts list, step-by-step assembly, and sign insertion procedures.
	Uline H-6351 Slatwall Vertical Panels Installation Guide Comprehensive guide for installing Uline H-6351 Slatwall Vertical Panels, including unpacking, safety instructions, and installation steps for various wall types.
	Uline H-1713, H-2770 Take-A-Number Wireless System Installation and Operation Manual Comprehensive guide for installing and operating the Uline H-1713 and H-2770 wireless take-a-number queue management systems. Includes parts lists, setup instructions, and programming details.
	ULINE Sliding Storage Shelves Assembly Instructions Detailed assembly instructions for ULINE Sliding Storage Shelves (models H-2901 through H-5435), including parts list and step-by-step guidance for setting up the shelving unit and sliding track system.
	ULINE H-3786 2 Way Slanted Arm Clothes Rack Assembly Instructions Detailed assembly instructions and parts list for the ULINE H-3786 2 Way Slanted Arm Clothes Rack. This guide provides step-by-step instructions for putting together the garment rack.
	Uline H-2489 16 Person Locker Assembly Instructions Detailed assembly instructions for the Uline H-2489 16 Person Locker, including vertical and horizontal assembly steps and a parts list.