Ritter 204 Manual Exam Table

Product Details

Maintenance and Cleaning

Periodic Inspection

• Power cord must be free of visible damage.
• All fasteners must be present and secure.
• All mechanical functions should operate.

Cleaning

Upholstery

Wash upholstery weekly with a mild liquid soap and water mixture. Rinse with clear water and dry completely to remove disinfection cleaner buildup. Disinfect with a solution of standard bleach and water mixed 1 in 10 (10%) or chlorine-based cleaners (refer to current CDC Guideline for Disinfection and Sterilization in Healthcare Facilities). Follow with a clear water rinse and thorough drying. To minimize damage, do not allow disinfectants to pool on the surface. Once the approved contact time is obtained, remove and dry excess liquid.

Painted Metal / Plastic Surfaces

Clean painted metal and plastic surfaces weekly using a clean soft cloth and mild cleaner.

Detailed care and maintenance instructions are available with the product and on midmark.com in the Technical Library under the User Information tab.

Operation

Circuit Breakers

Table Receptacle (optional): If the maximum load is exceeded, the circuit breakers remove power from the receptacle. Maximum Load: 5 amps.

To reset circuit breaker(s): Push circuit breaker toggle switch.

• Visual: Two circuit breaker units are shown. One is labeled ❌ Tripped (no power) and appears inactive. The other is labeled ✔️ Reset (power) and appears active.

Footrest Shelf and Treatment Pan

Visual: The lower section of the exam table is illustrated, highlighting the footrest shelf and the treatment pan area.

Footstep

Visual: A diagram shows the footstep integrated into the base of the exam table.

Back Section Adjustment

To position the back section:

1. Squeeze the Back Release Handle (on either side).
2. Move the back section to the desired position.
3. Release the handle to lock the back section in position.

Visual: A diagram shows a lever on the side of the exam table's back section labeled "Back Release Handle".

Pelvic Tilt Feature (optional)

To elevate seat section:

Lift seat section until pelvic support drops into place.

To return to flat position:

1. Lift seat section slightly.
2. Pivot trigger handle backward.
3. Lower seat section.

Visual: A diagram shows a handle mechanism near the seat section labeled "Trigger Handle".

Stirrups

Visual: Stirrups are shown retracted on the sides of the exam table.

Drawer Heater (optional)

To turn the drawer heater ON/OFF: Press the drawer heater switch.

Visual: A diagram shows a simple ON/OFF toggle switch labeled "Drawer Heater (optional)". The switch itself displays "10", likely indicating power status.

Service and Support

If service is required, contact your authorized Midmark dealer.

To contact Midmark directly:

• Phone: 1.800.Midmark (1.800.643.6275)
• Hours: 8:00 am until 5:00 pm Monday through Friday (EST)

For other languages, visit midmark.com.

Midmark Corporation
60 Vista Drive
Versailles, OH 45380-0286
Phone: 937.526.3662
Fax: 937.526.5542

midmark.com