ABS20M: 2A Surface-Mount Standard Recovery Bridge Rectifier
Datasheet for the ABS20M bridge rectifier from Diodes Incorporated.
Product Summary
| VRRM (V) | IF (A) | VF Max (V) @ IF = 1A | IR Max (µA) |
|---|---|---|---|
| 1000 | 2.0 | 0.95 | 10 |
Features
- Glass Passivated Die Construction
- Rating to 1000V PRV
- Ideal for Printed Circuit Board
- Reliable Low-Cost Construction Utilizing Molded Plastic Technique
- UL Recognized File # E364304
- Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
- Halogen and Antimony Free. "Green" Device (Note 3)
- For automotive applications requiring specific change control (i.e. parts qualified to AEC-Q100/101/104/200, PPAP capable, and manufactured in IATF 16949 certified facilities), please contact Diodes Incorporated or your local Diodes representative.
- https://www.diodes.com/quality/product-definitions/
Mechanical Data
- Package: SOPA-4
- Package Material: Plastic Material, UL Flammability Classification 94V-0 (No Br. Sb, CI)
- Moisture Sensitivity: Level 1 per J-STD-020
- Terminals: Finish - Matte Tin Plated Leads, Solderable Per MIL-STD-202, Method 208
- Polarity Indicator: Symbol Molded on Body
- Weight: 0.1 grams (Approximate)
Package Diagrams
Visual representations of the SOPA-4 (Type WX) package are provided, including:
- Top View: Shows the physical layout of the component from above.
- Pin Diagram: Illustrates the pin configuration and numbering.
- Internal Schematic: Depicts the internal electrical connections of the bridge rectifier.
Ordering Information
| Orderable Part Number | Package | Qty. | Carrier |
|---|---|---|---|
| ABS20M-13 | SOPA-4 (Type WX) | 3000 | Tape & Reel |
Notes:
- EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied.
- See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free.
- Halogen- and Antimony-free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.
- For packaging details, go to the Diodes Incorporated website at https://www.diodes.com/design/support/packaging/diodes-packaging/.
Marking Information
The component marking includes:
- ABS20M: Product Type Marking Code
- [Manufacturer Code]: Manufacturer's Code Marking
- YWW: Date Code Marking
- Where 'Y' is the Last Digit of the Year (e.g., 5 for 2025)
- And 'WW' is the Week Code (01 to 53)
Maximum Ratings
Maximum ratings are specified at TA = +25°C, unless otherwise specified.
| Characteristic | Symbol | Value | Unit |
|---|---|---|---|
| Maximum Repetitive Peak Reverse Voltage | VRRM | 1000 | V |
| Maximum DC Blocking Voltage | VDC | 1000 | V |
| Maximum Average Rectified Output Current | IF(AV) | 2.0 | A |
| Peak Forward Surge Current 8.3ms Single Half Sine Wave Superimposed on Rated Load | IFSM | 55 (TA = +25°C) 44 (TA = +125°C) | A |
| Peak Forward Surge Current 1.0ms Single Half Sine Wave Superimposed on Rated Load | IFSM | 110 (TA = +25°C) 88 (TA = +125°C) | A |
| I²t Rating for Fusing (t = 8.3ms) | I²t | 12.5 | A²s |
| Operating Temperature Range | TJ | -55 to +150 | °C |
| Storage Temperature Range | TSTG | -55 to +150 | °C |
Electrical Characteristics
Characteristics are specified at TA = +25°C, unless otherwise specified.
| Characteristic | Test Conditions | Symbol | Max | Unit |
|---|---|---|---|---|
| Forward Voltage | IF = 1.0A | VF | 0.95 | V |
| Leakage Current | VR = 1000V | IR | 10 (TA = +25°C) 100 (TA = +125°C) | µA |
| Typical Junction Capacitance (Note 5) | CJ | 12.34 | pF |
Note 5: Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
Thermal Characteristics
| Characteristic | Symbol | Typ | Unit |
|---|---|---|---|
| Typical Thermal Resistance (Note 6) | ROJC ROJL ROJA | 12 15.5 26 | °C/W |
Note 6: Thermal resistance junction to case, lead and ambient. Unit mounted on glass-epoxy substrate with 1oz/ft² 30mm * 30mm copper pad per pin with heatsink.
Performance Graphs
The following graphs illustrate typical performance characteristics:
Figure 1: Forward Current Derating Curve
This graph shows the relationship between Average Forward Current (A) and Temperature (°C) for both Case and Ambient conditions. It indicates the maximum continuous current the device can handle at various temperatures.
Figure 2: Maximum Non-Repetitive Surge Current
This graph illustrates the Peak Forward Surge Current (A) capability for an 8.3ms Single Half Sine Wave, plotted against the Number of Cycles at 60Hz. It shows the device's tolerance to short, high-current pulses.
Figure 3: Typical Forward Characteristics
This graph displays the Instantaneous Forward Current (A) as a function of Instantaneous Forward Voltage (V) at different junction temperatures (TJ = 25°C and TJ = 125°C). It shows the forward voltage drop characteristics.
Figure 4: Typcial Junction Capacitance
This graph presents the Typical Junction Capacitance (pF) versus Reverse Voltage (V), measured at TJ = 25°C, f = 1MHz, and Level = 1V. It is relevant for high-frequency applications.
Figure 5: Typical Reverse Characteristics
This graph plots the Instantaneous Reverse Current (µA) against the Rated Peak Reverse Voltage (V) at various junction temperatures (TJ = 25°C, TJ = 75°C, and TJ = 125°C). It details the leakage current behavior under reverse bias.
Package Outline Dimensions
Detailed dimensions for the SOPA-4 (Type WX) package are provided below. Please refer to the Diodes Incorporated website for the latest version.
Diagram Description: The diagram shows the SOPA-4 package with dimensions labeled D, E, E1, A, A2, b, c, e, L, E4, E3, D4, Ø, and Ø1. It indicates the depth and pin #1 location.
| Dim | Min | Max | Typ |
|---|---|---|---|
| A | 1.20 | 1.40 | -- |
| A1 | 0.00 | 0.15 | -- |
| A2 | 1.20 | 1.30 | -- |
| A3 | 0.43 | 0.63 | -- |
| b | 0.50 | 0.80 | -- |
| c | 0.10 | 0.30 | -- |
| D | 4.85 | 5.25 | -- |
| D4 | 0.45 | 0.85 | -- |
| e | 3.80 | 4.20 | -- |
| E | 6.40 | 6.80 | -- |
| E1 | 4.25 | 4.65 | -- |
| E3 | 5.20 | 5.60 | -- |
| E4 | 0.45 | 0.85 | -- |
| L | 0.40 | 0.80 | -- |
| Ø | -- | -- | 7° |
| Ø1 | -- | -- | 7° |
All Dimensions in mm.
https://www.diodes.com/package-outlines.html for the latest version.
Suggested Pad Layout
A suggested pad layout for the SOPA-4 (Type WX) package is provided below. Please refer to the Diodes Incorporated website for the latest version.
Diagram Description: The diagram shows a top-down view of the recommended PCB pad layout for the SOPA-4 package, with pads labeled C, X, Y, and Y1.
| Dimensions | Value (in mm) |
|---|---|
| C | 4.00 |
| X | 1.20 |
| Y | 1.80 |
| Y1 | 7.20 |
https://www.diodes.com/package-outlines.html for the latest version.
Important Notice
1. Warranty Disclaimer: DIODES INCORPORATED (Diodes) AND ITS SUBSIDIARIES MAKE NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO ANY INFORMATION CONTAINED IN THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
2. Use of Information: The Information contained herein is for informational purpose only and is provided only to illustrate the operation of Diodes’ products described herein and application examples. Diodes does not assume any liability arising out of the application or use of this document or any product described herein. This document is intended for skilled and technically trained engineering customers and users who design with Diodes’ products. Diodes’ products may be used to facilitate safety-related applications; however, in all instances customers and users are responsible for (a) selecting the appropriate Diodes products for their applications, (b) evaluating the suitability of Diodes’ products for their intended applications, (c) ensuring their applications, which incorporate Diodes’ products, comply the applicable legal and regulatory requirements as well as safety and functional-safety related standards, and (d) ensuring they design with appropriate safeguards (including testing, validation, quality control techniques, redundancy, malfunction prevention, and appropriate treatment for aging degradation) to minimize the risks associated with their applications.
3. Liability Assumption: Diodes assumes no liability for any application-related information, support, assistance or feedback that may be provided by Diodes from time to time. Any customer or user of this document or products described herein will assume all risks and liabilities associated with such use, and will hold Diodes and all companies whose products are represented herein or on Diodes’ websites, harmless against all damages and liabilities.
4. Intellectual Property: Products described herein may be covered by one or more United States, international or foreign patents and pending patent applications. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks and trademark applications. Diodes does not convey any license under any of its intellectual property rights or the rights of any third parties (including third parties whose products and services may be described in this document or on Diodes’ website) under this document.
5. Terms of Sale: Diodes’ products are provided subject to Diodes’ Standard Terms and Conditions of Sale (https://www.diodes.com/about/company/terms-and-conditions/terms-and-conditions-of-sales/) or other applicable terms. This document does not alter or expand the applicable warranties provided by Diodes. Diodes does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
6. Regulatory Compliance: Diodes’ products and technology may not be used for or incorporated into any products or systems whose manufacture, use or sale is prohibited under any applicable laws and regulations. Should customers or users use Diodes’ products in contravention of any applicable laws or regulations, or for any unintended or unauthorized application, customers and users will (a) be solely responsible for any damages, losses or penalties arising in connection therewith or as a result thereof, and (b) indemnify and hold Diodes and its representatives and agents harmless against any and all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim relating to any noncompliance with the applicable laws and regulations, as well as any unintended or unauthorized application.
7. Accuracy and Updates: While efforts have been made to ensure the information contained in this document is accurate, complete and current, it may contain technical inaccuracies, omissions and typographical errors. Diodes does not warrant that information contained in this document is error-free and Diodes is under no obligation to update or otherwise correct this information. Notwithstanding the foregoing, Diodes reserves the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes.
8. Unauthorized Use: Any unauthorized copying, modification, distribution, transmission, display or other use of this document (or any portion hereof) is prohibited. Diodes assumes no responsibility for any losses incurred by the customers or users or any third parties arising from any such unauthorized use.
9. Notice Updates: This Notice may be periodically updated with the most recent version available at https://www.diodes.com/about/company/terms-and-conditions/important-notice.
The Diodes logo is a registered trademark of Diodes Incorporated in the United States and other countries. All other trademarks are the property of their respective owners.
© 2025 Diodes Incorporated. All Rights Reserved.
