ENTTEC 9C Series Datasheet

Product Overview

The ENTTEC 9C Series is a professional grade 24V constant voltage LED strip featuring 120 LEDs per metre, engineered for architectural and entertainment lighting. It delivers uniform, high-quality white light on a large scale with precision and consistency.

Available in low (9CL), medium (9CM), high (9CH), and ultra (9CU) output options, the 9C Series offers flexibility to match exact lumen requirements. Each variant is offered in three colour temperatures: 6000K, 4000K, and 3000K. The colour-temperature adjustable option 9CY is also available to fine-tune ambience. The strips can be cut and joined to create virtually any shape or layout.

ENTTEC prioritizes manufacturing quality and attention to detail. Each strip is built on a thicker substrate for enhanced durability, improved heat dissipation, and reduced voltage drop, outperforming standard LED strips.

[Visual Description: A close-up view of the ENTTEC 9C Series LED strip, showcasing the densely packed LEDs (120 per meter) on a white PCB, designed for uniform light output.]

Features

• 24V DC constant voltage
• High quality LEDs with 2-step binning for maximum colour consistency and longevity
• 11mm wide white LED tape
• 10 metres length per reel
• 120 LEDs per meter
• LEDs dimmable by ENTTEC CVC4
• Can be cut and joined together
• Minimum cut length 50mm (except for 9CY)
• Input and output connections (loose cable)
• IP20 Indoor use only

Product Specifications

*Note: The maximum continuous operating length is measured with a single 24V power supply, injecting power to one end of the product. At any point of maximum continuous operating length, the light intensity remains the same.

Detailed Specifications

Box Content

• 1* 10m 9C LED strip
• 1* 2 core bare end cable (3A max, only for testing purpose)

Safety Information

• Do not exceed the rated 24V DC power supply. Ensure all cabling is rated to handle the current of each section.
• Make all connections and ensure your installation is appropriately fused before powering it.
• LED strips produce heat; ensure proper thermal management by attaching to a thermally conductive surface.
• This product is intended for indoor use only. Do not expose to moisture, doing so will void the warranty.

Power & Connections

[Diagram Description: Shows power input terminals labeled '+24V: 24VDC' and 'GND: Ground'.]

To run longer continuous lengths, power must be re-injected at every maximum continuous operating length. This will mitigate expected voltage drop.

Physical Dimensions

General (All except 9CY):

• Strip width: 11mm
• Cuttable every 50mm

9CY Variant:

• Strip width: 11mm
• Cuttable every 100mm

[Diagram Description: Visual representations showing the physical dimensions of the LED strips. For the general variants (excluding 9CY), a diagram indicates a width of approximately 11mm and cut points every 50mm. For the 9CY variant, a similar diagram shows a width of approximately 11mm and cut points every 100mm. Both diagrams show a 3M adhesive backing.]

Ordering Information

For further support and to browse ENTTEC's range of products, visit the ENTTEC website.