Wireless Power Transfer WLP-100

Standard Features

• No need to core drill the door, no worries about broken wires
• Door status output
• Transfers lock status monitoring
• Field selectable 12/24 VDC output
• Use with fail-secure electrified locks/latches (Provides up to 30 seconds of sustained power for intermittent duty)
• Flexible mounting position
• Infrared signal light
• For wood and metal doors (extension mounting tabs included for metal door installation)

Specifications

• Input Power (Frame Side): 1A / 27.6VDC
• Output Power (Door Side): 12VDC @ 800mA or 24VDC @ 400mA (Field selectable)
• Current Draw: 1A / 27.6VDC (Requires 1.5A power when energized)
• Maximum Door Gap: 3/16" (4~5mm)
• Maximum Tolerance with 3/16" (4~5mm) Door Gap:
  • Horizontal: 1/16" (1mm), 1mm for IR sensing
  • Vertical: 1/16" (1mm), 1mm for IR sensing

Product Components

The system consists of a Receiver Unit (Install at Door Leaf) and a Transmit Unit (Install at Door Frame).

Receiver Unit (Install at Door Leaf)

• Pigtail Wire Color & Function:
  • Blue: Lock Activation Input
  • Green: Short to Activate
  • Red (+): 12 or 24 VDC Output (Field selectable)
  • Black (-): Output

Transmit Unit (Install at Door Frame)

• Pigtail Wire Color & Function:
  • Red: Input Power
  • Black: Read Switch
  • Yellow: Relay Output (COM)
  • White: Relay Output (NC)
  • Green: Relay Output (NO)
  • Blue: 24VDC@1A

Installation Diagram

The WLP-100 system is designed for installation across the door gap. The transmitter unit is mounted on the door frame, and the receiver unit is mounted on the door leaf. Infrared sensors align the units across the gap, with a maximum tolerance of 1/16" (1mm) horizontally and vertically for optimal performance.

Visual representation shows a person standing near a door, with wireless power signals indicated between the door frame and the door leaf, powering an electronic lock mechanism.

Dimensions

WLP-100 Receiver/Transmitter Dimensions:

• Height: 6 1/8" (156mm)
• Width: 1 5/16" (33.5mm)
• Depth: 4 1/2" (115mm)
• Mounting Plate Width: 5 1/2" (140mm)
• Mounting Plate Depth: 1" (25mm)

Warranty

GIANNI INDUSTRIES, INC. warrants the WLP-100 against defects in material and workmanship for a period of 1 year from the date of sale to the original client, provided it is used in normal service. GIANNI INDUSTRIES, INC. reserves the right to change specifications without notice as part of its policy of continual development and improvement.