GE Profile™ 30" Built-In Touch-Control Induction Cooktop
PHP9030ODT
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
IMPORTANT: Requires a 3" free area between the bottom of the cooktop to any combustible material, i.e., shelving. Free area not required when installing wall oven underneath cooktop. Refer to installation instructions. Requires a 15" minimum from cooktop to adjacent overhead cabinets. Units are furnished with a 48" flexible armored cable.
NOTE: 30" induction cooktops are approved for use over select GE 27" and GE 30" Single Wall Ovens and Warming Drawers. Refer to cooktop and wall oven/warming drawer installation instructions packed with product for current dimensional data. If installed with a GE Telescopic Downdraft System, consult both the cooktop and downdraft installation instructions packed with product before installing. Cooktop gas/electric supply may need to be re-routed to install downdraft. The countertop cutout requires 23-1/2" minimum flat countertop surface and 25" minimum total countertop depth. In addition, other clearances to front edge of the countertop must be considered. Before installing, consult installation instructions packed with product for current dimensional data.
APPROXIMATE COOKING DIMENSIONS
Clearances:
- 13" MAX. depth of unprotected overhead cabinets
- 4-5/8" at baffle near center of unit (except when installed above an approved wall oven) and 3-1/4" at rear of air intake
- 1-3/4" MIN. to rear wall
- 2-1/2" MIN. Required
- 30" MIN. Clearance from countertop to unprotected overhead surface
- See label next to nameplate for MIN. clearance to rear wall.
- 2" MIN. Clearance from cutout to nearest vertical wall or cabinet on right side of the unit below the 15" MIN. clearance height.
- 2" MIN. clearance to side wall from cut-out on the left of the unit
- 15" MIN. height from countertop to nearest cabinet (including light rails) on both sides of cooktop
Cutout Dimensions:
- 29-3/4" (Cooktop Width)
- 19-1/4" (Cooktop Depth)
- 28-1/2" to 28-5/8" (Cutout Width)
- 19-5/8" to 19-3/4" (Cutout Depth)
To ensure accuracy, it is best to make a template when cutting the opening in the counter.
INSTALLATION ABOVE A WALL OVEN
Clearances:
- 2-1/2" MIN From front edge of countertop to front edge of cooktop cutout
- 31-1/4" MIN From top surface of countertop to top surface of wall oven support platform
CUTOUT FILLER TRIM KIT:
A filler trim kit is available for use if your countertop cutout is larger than the dimension shown, up to 29-13/16" x 20-7/16". Order JXTR32B for black or JXTR32W for white, to reduce the cutout opening for installation of this cooktop. These kits may be ordered from your GE Appliances Dealer.
Electrical Specifications:
| KW RATING | AMPERAGE | NOTES | |
|---|---|---|---|
| 240V | 7.4 | 40 Amps | *NOTE: Check local codes for required breaker size. |
| 208V | 6.4 |
FEATURES AND BENEFITS
- Maximum Responsiveness - 19 Control Levels
- Power Boil
- Precision Temperature Control
- Easy Clean Surface
- Safe Surface
- Most Efficient Heating
- Synchronized Elements
- Chef Connect
- Smart Cookware Rebate for 11" Smart Pan
- Timer
- Built-in WiFi
- Control Lock
- Fit Guarantee
- Model PHP9030DTBB - Black on black
SMART COOKWARE REBATE
Smart pans pair with this smart cooktop to ensure you get the perfect cooking results. Earn a rebate for a free 11" Hestan Cue Smart Pan.
OPTIONAL FILLER TRIM KIT
Fill in any countertop gaps with this filler trim kit. Order part number JXTR32B.
OPTIONAL SOUS VIDE PROBE
A Sous Vide Probe lets you achieve great results on the stove. Order part number JXPROBE1.
GUARANTEED FIT
Replacing a similar cooktop from GE Appliances or another brand? GE cooktops are guaranteed for an exact fit or GE Appliances will pay up to $100 toward modifications. Visit geappliances.com for more info.
For answers to your Monogram, GE Café™, GE Profile™ or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center Service, 800.626.2000.
Specification Revised 03/23
GE Appliances: Shop for Home, Kitchen, & Laundry Appliances
