CCD-0010244 រក្សាអ្នកដំណើរយានយន្តដោយស្វ័យប្រវត្តិ
ព័ត៌មានអំពីផលិតផល
លក្ខណៈបច្ចេកទេស
- ម៉ូដែល: CCD-0010244
- ការកែប្រែ៖ ២២
ការណែនាំអំពីការប្រើប្រាស់ផលិតផល
Turning the System Off or Selecting Automatic Operation
Use the @) button to turn the system off completely or select
ប្រតិបត្តិការដោយស្វ័យប្រវត្តិ។
Recirculate Control
It is recommended to use the Recirculate Control for efficient
air circulation within the system.
មុខងារ Defrost
Press the Defrost Button to activate the defrost function for
clearing fog or ice on the windshield.
សំណួរដែលសួរញឹកញាប់ (FAQ)
Q: How do I turn off the system completely?
A: To turn off the system completely, press the @) button.
Q: What is the Recirculate Control used for?
A: The Recirculate Control is used for efficient air circulation
within the system.
Q: When should I use the Defrost Function?
A: The Defrost Function should be used to clear fog or ice on
កញ្ចក់។
CCD-0010244 Rev: 5.14.2025
Manual Fan Only Mode. Access this mode using the@) button. If the system is off, pressing the @button once will access the automatic operating mode, and pressing it again will access the manual fan mode as indicated by the word “FAN” appearing in the display window. In this mode, both heat and AC are off, and only the fan will operate. Upon first entering this mode, the fan will- be at fan speed 1 (the minimum fan speed). You may select a different fan speed by pressing the® button. Press te
@) button to turn the system off completely or select
ប្រតិបត្តិការដោយស្វ័យប្រវត្តិ។
Recirculate Control. It is recommended that the 0
button be used in extreme temperature conditions (hot or cold) to permit the vehicle’s heating or cooling systems to work most effectively. lt may also be desirable to use recirculate when driving in a tunnel or city traffic to help keep out noxious fumes. It is not considered safe practice to use recirculate for extended periods when all windows and outside vents are closed, as the possible build up of carbon dioxide may cause drowsiness. It is also inadvis able to use recirculate during cool, humid conditions as this may cause the windows to fog excessively. If the recirculate button on the control module has not been enabled, the OEM control may be used for the same purpose. This control may be marked “recirc” or (arrows forming a circle) or “MAX”.
Defrost Button. The <:jiv button will cause the fan to go to manual fan speed 4 and turn the AC on. These are the conditions best suited to clearing a fogged windshield. You must use the OEM mode control to select the defrost position to direct the air towards the windshield. Unless this air direction is selected, the defrost function will be ineffective. Temperature will still be controlled automatically.
Coolant Temperature Threshold Thermostat. ln cold
8 weather conditions, the system will not permit the blower
fan to operate in either or(3 mode (it will operate in manual fan speeds or defrost mode) until the coolant temperature has elevated to the point that heat is available for the passenger compartment. This is to prevent cold air from blowing on the passengers when the vehicle is first started. It is not unusual for it to take several minutes of warm up time to raise the coolant temperature sufficiently for the fan to start blowing. Driving the vehicle will cause it to warm up more quickly than letting it idle.
កំណត់ចំណាំសំខាន់ៗ៖
1} It is not necessary to turn the system off before shutting off the vehicle. The system will turn off automatically when the vehicle ignition is switched off, and will turn back on automatically when the vehicle is restarted, retaining in memory, and returning to operation, in the same mode and
settings it was last operating in.
You may manually turn the system off at any time by pressing the @button. This turns off the heat, air conditioning, and blower fan completely.
8, 2} There are two modes of fully automatic operation. In
របៀបស្វ័យប្រវត្តិ
the system will select and regulate heat
ing and air conditioning and vary the fan speed from the
minimum to the maximum possible speed. The Auto Lo
Moder::, also permits full automatic operation of heating
and c65ITflg, but the _fan operates at lower minimum
and maximum speeds. It is useful when the operator
wishes to avoid the noise or rush of air possible at the
B· highest operating speeds in Auto Mode
ជាទូទៅ
B Auto Lo Mode may be used under all conditions
8 except the extremes of hot or cold when Auto Mode
គឺល្អជាង។
3} Generally, best results are obtained when the dash board or panel vents are selected when the system is cooling, and the floor vents are selected when the system
is heating. As a rule of thumb, heat is generally required at outside temperatures above 55’F (13’C). For safety, the windshield or defrost vents must be selected if the windshield needs to be defogged or defrosted.
Combinations of vents, (eg. floor and wiridshield, or floor and panel) may be most comfortable in mild climate condi tions when minimal heating or cooling is required. These
combination positions may also offer better air distribution when the passenger compartment is large, or there are rear seat passengers.
Large differences in the perception of heating and cooling will be felt depending on whether the vent output blows directly on you or is positioned to blow the air indirectly into the passenger compartment.
Personal experimentation with the combination of vent selection and aiming will yield the best comfort results.
4) Most people find that their comfort zone is between 72′ F (22′ C) and 78′ F (26′ C). Certain factors such as
the intensity of the sun, humidity, or season may affect your optimal comfort zone. Most people find that they are more comfortable with a warmer temperature at night than during the day.
TranstAir: 480 E. Locust Street· Phone. ៨៦៦-៤៤៧-២១៩៤ ទូរសារ៖ ៨៦៦-៤៤៧-២១៩៤
Dallastown, PA 17313 · USA · Toll Free: ៨៦៦-៤៤៧-២១៩៤
@ ·U ·-
Trans/Air ls an 1.so committed ctass
tM9o0a0pn1urofvare.c1dgt1n1srginegrwedoCrolfdirrpm.
ក្រុមហ៊ុនផលិត
E-mail: Trans-Air-Lehnert@worldnet.att.net
FM 39947 and services to the bus and
Website: http://www.transairmfg.com/
commercial vehicle markets.
CCD-0010244 Rev: 5.14.2025
Form# 002369 Rev-6/00
ឯកសារ/ធនធាន
 |
LIPPERT CCD-0010244 Automatically Maintain The Vehicle Passenger [pdf] សៀវភៅណែនាំអ្នកប្រើប្រាស់ CCD-0010244, CCD-0010244 Rev 5.14.2025, CCD-0010244 Automatically Maintain The Vehicle Passenger, CCD-0010244, Automatically Maintain The Vehicle Passenger, Maintain The Vehicle Passenger, Vehicle Passenger, Passenger |