LEDLITE LTSPSF60 Surface Mounted Frame

Surface-Mounted Frame for LTSP60CCT Panel Lights
Read these instructions before commencing installation and retain them for future reference.

ព័ត៌មានសំខាន់

• It is recommended that luminaires are installed by a qualified electrician, ensuring the installation complies with current IEE wiring regulations & local building control. These products are designed for use with LTSP60CCT Slim Panel Lights, and we cannot guarantee it will be suitable for use with other makes.
• LEDLite will not accept responsibility for any claims arising from a poor installation. Always switch off the mains supply before servicing.
  This frame is suitable for indoor use only.

វិមាត្រ (មម)

កញ្ចប់មាន

នីតិវិធីដំឡើង

ឧបករណ៍ដែលត្រូវការ

ជំហានទី 1៖ Take out the connectors and the aluminium frame from the package and assemble them one by one. Finish assembling a U shape frame. (Fig.1)

ជំហានទី 2៖ Identify the location and direction of any hidden supply cables or service pipes before drilling fixing holes.
ជំហានទី 3៖ Using the U shape frame as a guide, mark the position of the fixing holes onto the wall/ceiling surface adjacent to the supply wiring.
ជំហានទី 4៖ Drill holes at the positions marked. Secure the frame to the wall/ceiling using suitable fixings. (Fig. 2)

ជំហានទី 5៖ Slide the LTSP60CCT Panel Light into the frame (Fig. 3)

ជំហានទី 6៖ Add the side panel to cover the end and make sure the panel light and the frame are fixed firmly (Fig.4).

សំណួរគេសួរញឹកញាប់

Can this frame be used with other panel lights?

The frame is designed for use with LTSP60CCT Slim Panel Lights specifically. We cannot guarantee its compatibility with other makes.

Is this frame suitable for outdoor use?

No, this frame is suitable for indoor use only.

ឯកសារ/ធនធាន

LEDLITE LTSPSF60 Surface Mounted Frame [pdf] ការណែនាំអំពីការដំឡើង LTSPSF60 Surface Mounted Frame, LTSPSF60, Surface Mounted Frame, Mounted Frame, Frame

ឯកសារយោង

• សៀវភៅណែនាំអ្នកប្រើប្រាស់