innioasis G3 Flashing Tutorial

លក្ខណៈបច្ចេកទេស

• ម៉ូដែល៖ French G3
• កំណែកម្មវិធីបង្កប់៖ V4.10-20250415
• Flash Tool Version: SP_Flash_Tool_exe_Windows_v5.1904
• ដំណើរការ៖ MT6753

ការណែនាំអំពីការប្រើប្រាស់ផលិតផល

1. ទាញយក និងពន្លាកម្មវិធីបង្កប់ និងឧបករណ៍ Flash
   1. Download the following two Google Drive links to get the flashing tool and firmware: https://drive.google.com/file/d/1kEmsF0dxVSBnJYIybMdQEhtvTQus0b-T/view?usp=drive_link https://drive.google.com/file/d/1aUj0XXKxkHZrAgSS6lUhmgF_jGzu2YPR/view?usp=drive_link
   2. ពន្លា zip ដែលបានទាញយក file:
      After unzipping, you will see the following files:
      • MX3_FR_G3-V4.10-20250415
      • SP_Flash_Tool_exe_Windows_v5.1904
      • ទាញយកទាំងមូល file and then unzip it! It won’t work without unzipping! If you don’t have an unzip tool, download https://www.win-rar.com/ another unzipping tool.
      • របៀបពន្លា៖ ចុចកណ្ដុរស្ដាំលើ file ហើយជ្រើសរើស Unzip ។
2. ដំណើរការ និងកំណត់រចនាសម្ព័ន្ធ Flash Tool
   1. In the Flash Tool folder, find and double-click “Flash_tool.exe” to run it.
      • ចំណាំ៖ បន្ទាប់ពីពន្លា "Flash_tool.exe" file អាច​នឹង​ត្រូវ​បាន​លុប​ខុស​ព្រោះ​វា​ត្រូវ​បាន​វិនិច្ឆ័យ​ថា​ជា​ប្រភព​មិន​ស្គាល់ file by the Windows Security Center or third-party security software. If so, please temporarily turn off Windows protection detection or third-party security software before unzipping. You can also set Flash_tool.exe as a trusted program in Windows protection detection or third-party security software. For win10, please visit Settings>>Update and Security>>Windows Security Center>>Virus and Threat Protection, find “Protection History”, then find “Flash_tool.exe” and restore it.
   2. Click the First ‘choose’ button on the right
      • ទៅ file SP_Flash_Tool_exe_Windows_v5.1904
      • Select MTK_AllInOne_DA.bin and open it.
   3. Click the Second ‘choose’ button on the right
      • ទៅកាន់ file MX3_FR_G3-V4.10-20250415
      • Select MT6753_Android_scatter and open it.
   4. Click and select the “Format All + Download” option in the flash type drop-down box. As shown below:
      1. Flash G3 player
         1. ចុចប៊ូតុង "ទាញយក" ។ ឧបករណ៍អាប់ដេតនឹងកំពុងរង់ចាំឧបករណ៍ភ្ជាប់។
         2. Next, turn offthe  G3 player and connect it to your computer with the supplied USB-C to USB-C cable. The update tool will automatically recognize the connected device and start formatting and updating the firmware. You can see the percentage of completion through the color progress bar below, until 100% complete.

នៅពេលរួចរាល់ ឧបករណ៍បញ្ចេញពន្លឺនឹងលេចឡើងប្រអប់បញ្ចូល។ ដូចដែលបានបង្ហាញខាងក្រោម

ចំណាំ

• Please make sure that the G3 player is turned off and then connected to the computer; otherwise, it will not be able to flash normally.
• If there is no response from the progress bar after connecting to the computer, it means that the Flash tool does not recognize the G3 player. Most cases are caused by the lack of the correct MTK USB driver on the computer.
• ប្រសិនបើអ្នកជា win10 ឬ win11 សូមទាញយកកម្មវិធីបញ្ជាខាងក្រោមនៅលើកុំព្យូទ័ររបស់អ្នក ហើយព្យាយាមម្តងទៀត។
• https://www.wooabc.cn/download/MTPUSBDriverForWin10.rar
• If you have other versions of Windows, please contact us for the corresponding driver.
• នៅពេលនេះ ការអាប់ដេតកម្មវិធីបង្កប់ត្រូវបានបញ្ចប់។
• សម្រាប់ជំនួយបន្ថែម ឬកំណត់ពេលណាត់ជួបជំនួយពីចម្ងាយ សូមទាក់ទងមកយើងខ្ញុំតាមរយៈអ៊ីមែល ហើយយើងនឹងឆ្លើយតបទៅអ្នកវិញឱ្យបានឆាប់តាមដែលអាចធ្វើទៅបាន។
• ការគាំទ្រតាមអ៊ីនធឺណិត៖ innioasis-csc@hotmail.com

សំណួរគេសួរញឹកញាប់

Can I use a different USB cable for the flashing process?

It is recommended to use the supplied USBA to USB-C cable to ensure a stable connection during the flashing process.

ឯកសារ/ធនធាន

innioasis G3 Flashing Tutorial [pdf] ការណែនាំអ្នកប្រើប្រាស់ G3 Flashing Tutorial, G3, Flashing Tutorial, Tutorial

ឯកសារយោង

• សៀវភៅណែនាំអ្នកប្រើប្រាស់