HSRMO-M Hook Splint Relative Motion Orthese
លក្ខណៈបច្ចេកទេស
- Product Name: Relative Motion Orthosis (RMO)
- Usage: Can be applied to include either three or four fingers
- Objective: Can be placed in relative flexion or extension
ការណែនាំអំពីការប្រើប្រាស់ផលិតផល
Sizing the Hook Splint
Apply the RMO to the hand with the middle finger above the band. Slide the tab into the perforation to set orthosis size. Make a fist to test sizing.
Locking the First Tab
Remove the RMO from the hand and secure the first tab by looping it downward and through the adjacent perforation. Use a tool such as needle nose pliers or forceps if needed.
Locking the Second Tab
Overlap the remaining segment and press layers together, forming the Rigid Zone. Secure the second tab with a simple fold, by bending it flat in the direction of the Rigid Zone.
ការពិនិត្យចុងក្រោយ
Reapply the RMO with the middle finger centered over the Rigid Zone. Make a fist to mold the bridge.
Crimping the Tabs
The tabs can be further secured by crimping them into the band using needle nose pliers or a similar tool for lower profile ផ្ទាំង។
ចំណាំ៖ The RMO will become more comfortable over time with hand movement. The metallic core will settle and further mold actively to the hand.
សំណួរគេសួរញឹកញាប់
- Q: How can I ensure I have the correct size for the RMO?
A: Follow the instructions to size the hook splint and make a fist to test sizing. - Q: Can I adjust the RMO for different fingers?
A: Yes, you can adjust the RMO to include either three or four fingers and place them in relative flexion or extension depending on your objective.
HOW TO APPLY AS A RELATIVE MOTION ORTHOSIS (RMO)
WITH MIDDLE FINGER RELATIVELY EXTENDED
- SIZING THE HOOK SPLINT.
Apply the to the hand with the ទំពក់ ពុះ middle finger above the band. Slide the tab into the perforation to set orthosis size. Make a fist to test sizing (see figure 1). 
LOCKING THE FIRST TAB.
Remove the from the hand and secure the first tab by looping it downward and through the adjacent perforation (see figure 2). Use a tool such as needle nose pliers or forceps if needed.- LOCKING THE SECOND TAB.
Overlap the remaining segment and press layers together, forming the Rigid Zone* (see figure 3). Secure the second tab with a simple fold, by bending it flat in the direction of the Rigid Zone.
*The Rigid Zone is the area of the overlaps, creating twice the thickness and rigidity. - FINAL CHECK.
Reapply the with the MF centered over the Rigid Zone. A fist is then made to mold the bridge.
- CRIMPING THE TABS.
The tabs can be further secured by crimping them into the band using needle nose pliers or a similar tool for lower profile ផ្ទាំង។
ចំណាំ៖ នេះ។ ទំពក់ ពុះ will become MORE comfortable over time with hand movement. The metallic core will settle and further mold actively to the hand.
RECOMMENDED USE.
“The RMO can be applied to include either three or four fingers. The involved finger(s) can be placed in either relative flexion or extension, depending on the objective. See some exampខាងក្រោម៖
Indications for the RMO with relative extension include:
- Extensor tendon/sagittal band injury or repair
- PIP extension contracture
› 2º swan neck deformities or trauma - Trigger finger non-operative management
Indications for the RMO with relative flexion include:
- PIP flexion contracture or extensor lag › 2º Trauma, scar tissue/adhesions, fracture shortening, boutonniere deformities, flexor tendon repair, Dupuytren’s disease (s/p fasciectomy, needle or enzyme tx) or post trigger finger release.
ឯកសារ/ធនធាន
 |
HOOK SPLINT HSRMO-M Hook Splint Relative Motion Orthese [pdf] សៀវភៅណែនាំ HSRMO-M Hook Splint Relative Motion Orthese, HSRMO-M, Hook Splint Relative Motion Orthese, Splint Relative Motion Orthese, Relative Motion Orthese, Motion Orthese |
