Gotopceed T070 Rechargeable Sensor Ceiling Light

ការណែនាំ

នៅប្រហែល ១៤៤,៩៧ ដុល្លារ, the Gotopceed T070 Rechargeable Motion Sensor Ceiling Light blends elegant style with multipurpose use. It is made for places without conventional electricity, such as closets, sheds, corridors, and patios. It has a strong 8000 mAh lithium-polymer battery that may run for 7–10 hours and, depending on use, 30–60 days in motion-sensor mode. This lamp has three color temperatures (3000 K warm, 4000 K neutral, and 6000 K cold), 10-level dimming, motion-sensing, and timer features (15/30/60 minutes). It is magnetically affixed for easy installation and removal. It is well regarded for its brightness, simplicity of installation, and adaptability to a variety of settings, earning it 4.4 out of 5 stars from 476 reviews.

ភាពជាក់លាក់

លេខម៉ូដែល	T070
វិមាត្រ	7.5 × 7.5 × 0.55 in (≈19.1 × 19.1 × 1.4 cm)
ទម្ងន់	≈1.01 lb (~460 g)
ប្រភពថាមពល	USB rechargeable 8000 mAh Li‑Polymer battery
ពន្លឺ	400 lumen
សីតុណ្ហភាពពណ៌	3000 K / 4000 K / 6000 K
កម្រិតស្រអាប់	10 កម្រិតពន្លឺដែលអាចលៃតម្រូវបាន។
ការដំឡើង	Magnetic mount (adhesive or screws)
គ្រប់គ្រង	Remote control; push-button on unit
ម៉ូដែលឧបករណ៍កំណត់ពេលវេលា	15 min / 30 min / 60 min auto-off
ជួររកឃើញចលនា	≈9–16 ft; auto-off after ~20 seconds
ការធានា	ការធានាពីក្រុមហ៊ុនផលិតរយៈពេល 24 ខែ

តើមានអ្វីនៅក្នុងប្រអប់

• ឯកតាពន្លឺ
• ការបញ្ជាពីចម្ងាយ
• ខ្សែសាក USB
• Metal magnet strip (adhesive-backed)
• 4 sticky pads
• សៀវភៅដៃ

លក្ខណៈពិសេស

• USB Rechargeable Battery (8000 mAh): No need to worry about replacing batteries—just recharge with USB and enjoy extended, eco-friendly use.

• ប្រសិទ្ធភាពយូរអង្វែង៖ Delivers 7–10 hours of continuous lighting or lasts up to 60 days in motion sensor mode, depending on usage patterns.
• Magnetic Mounting System: Easily attaches to ceilings or walls with the included magnetic strip—snap on or off anytime for charging or repositioning.
• ការរកឃើញចលនាឆ្លាតវៃ៖ Automatically turns on when movement is detected within range, offering hands-free convenience in dark areas.
• របៀបបំភ្លឺពីរ៖ Switch between motion-sensor mode or steady-on mode using the remote control, depending on your needs.

• សីតុណ្ហភាពពណ៌ដែលអាចលៃតម្រូវបាន៖ Choose from warm white, neutral white, or cool white lighting to match your environment or mood.
• ការគ្រប់គ្រងកម្រិតពន្លឺ 10៖ Tailor the brightness to your liking with fine adjustments via remote—perfect for both subtle ambiance and bright task lighting.
• Built-In Auto-Off Timer: Set the light to turn off automatically after 15, 30, or 60 minutes—great for energy savings and peace of mind.
• ការរចនាស្ដើង និងរលោង៖ បង្រួម និងទាបfile build fits seamlessly in tight or low-clearance spaces like closets and hallways.
• ភាពងាយស្រួលប្រើថាមពលថ្ម៖ Ideal for places without wiring, such as sheds, stairways, bathrooms, or outdoor patios.
• ការចូលប្រើការបញ្ជាពីចម្ងាយ៖ Adjust lighting settings comfortably without needing to climb or reach the fixture.

• Robust and Durable Build: Made with long-lasting LED components and solid materials to handle regular use in varied environments.
• ភាពចម្រុះខាងក្នុង និងខាងក្រៅ៖ Suitable for use both inside and out—great for closets, garages, porches, or even campកំពុងរៀបចំ។
• ការដំឡើងឧបករណ៍ឥតគិតថ្លៃ៖ Setup is quick and easy—no tools required. Simply peel, stick, and mount in minutes.
• Reliable Warranty Support: Backed by a 24-month manufacturer warranty, ensuring peace of mind and product longevity.

មគ្គុទ្ទេសក៍សេតយូ

• Step 1 – Unpack the Contents: Open the box and ensure all items (light, magnetic strip, USB cable, remote, etc.) are present.
• Step 2 – Fully Charge the Light: Use the included USB cable to charge for approximately 4–5 hours before first use.
• Step 3 – Apply the Magnetic Strip: Peel off the adhesive backing and stick the magnet to your chosen surface—wall or ceiling.
• Step 4 – Mount the Light Fixture: Gently attach the light to the magnet—no screws or tools needed.
• Step 5 – Power On the Light: Use the onboard button or remote control to turn the light on.
• Step 6 – Choose Color Temperature: Select from warm, neutral, or cool white lighting based on your preference or room setting.
• Step 7 – Set Brightness Level: Adjust the brightness using the remote to suit your lighting needs.
• Step 8 – Pick a Mode: Choose between motion sensor mode or keep the light on constantly using the remote.
• Step 9 – Enable Timer (Optional): If desired, set the auto-off timer to 15, 30, or 60 minutes for automatic shutoff.
• Step 10 – Motion Sensor Functionality: The light will activate within one second when it detects motion.
• Step 11 – Auto Shut-Off: Light will turn off automatically around 20 seconds after no movement is detected.
• Step 12 – Recharge as Needed: When the battery is low, remove the light from the magnet and recharge it via USB.
• Step 13 – Reuse and Reattach: Once fully charged, reattach it magnetically to resume normal use.
• Step 14 – Optional Screw Mounting: For permanent installation, screws can be used in place of or alongside the adhesive.

ការថែទាំ និងថែទាំ

• Recharge When Dimming Occurs: If the light dims noticeably, it’s time to recharge the battery.
• សម្អាតជាប្រចាំ៖ Wipe the magnetic strip and surface with a clean, damp cloth to maintain strong adhesion and proper contact.
• ជៀសវាងការខូចខាតទឹក៖ Do not expose the light to water or submerge it. Only clean with a slightly damp ក្រណាត់។
• Dry Storage Conditions: Store the unit in a dry area when not in use to prevent moisture damage.
• ការពារការលើសចំណុះ៖ Unplug the USB once fully charged to prolong battery life.
• ប្តូរថ្មពីចម្ងាយ៖ If the remote stops responding, check and replace its battery as needed.
• Secure in Humid Conditions: If adhesive loosens due to humidity, use the provided screws for a firmer hold.
• ឧបករណ៍ចាប់សញ្ញាសាកល្បងម្តងម្កាល៖ Periodically ensure the motion sensor activates the light as expected.
• Reapply Adhesive if Needed: If the light detaches over time, use replacement adhesive or secure with screws.
• ការពារពីការខូចខាត៖ Avoid dropping or subjecting the light to impacts which could affect functionality.
• Use Within Safe Ranges: Operate the device within the recommended temperature and humidity levels specified by the manufacturer.
• Recharge Before Storing Long-Term: Fully charge the light before storing it for extended periods to protect battery health.
• Inspect Battery After Prolonged Use: Over time, monitor battery performance; contact support if degradation is noticeable.
• Contact for Warranty Help: For issues related to wear, battery life, or damage, reach out to the manufacturer within the 24-month warranty window.

ការដោះស្រាយបញ្ហា

គុណសម្បត្តិ និងគុណវិបត្តិ

គុណសម្បត្តិ៖

• Effortless installation via magnetic mounting.
• Energy-efficient with multiple modes and long battery life.
• Highly customizable: color, brightness, timer, modes.
• Versatile usage across spaces without wiring.
• 24‑month warranty ensures peace of mind.

គុណវិបត្តិ៖

• Adhesive may fail in humidity; screws may be needed.
• Battery requires periodic recharging (especially in steady mode).
• Remote feels slightly less durable per some reviews.
• Not waterproof—limited for exposed outdoor use.
• Brightness may be insufficient for large areas.

ការធានា

ផលិតផលមកជាមួយ ក 24‑month (2-year) manufacturer warranty, offering free replacement once issues are confirmed

សំណួរដែលសួរញឹកញាប់

How long does the Gotopceed T070 light last on a full charge?

The Gotopceed T070 can last 7-10 hours in stay-on mode and up to 30-60 days in motion sensor mode, depending on usage and brightness level.

What type of battery is used in the Gotopceed T070 ceiling light?

The T070 is built with a rechargeable 8000mAh lithium polymer battery, included in the package.

Can I mount the Gotopceed T070 without drilling holes?

Absolutely. The magnetic mounting design allows for tool-free installation, preventing wall damage and making repositioning easy.

Does the Gotopceed T070 come with a remote control?

The T070 includes a remote control for adjusting brightness, selecting color temperature, switching modes, and setting timers.

How does the motion sensor function on the Gotopceed T070 work?

In sensor mode, the light activates automatically when motion is detected within 9,16 feet and turns off after 20 seconds of inactivity.

Can I manually keep the Gotopceed T070 light on continuously?

Switch to the ON mode, and use the remote to turn it off when desired. This is ideal for prolonged tasks or activities.

How bright is the Gotopceed T070 light?

The light emits up to 400 lumens of brightness and features 10 adjustable brightness levels to suit various needs.

ឯកសារយោង

• សៀវភៅណែនាំអ្នកប្រើប្រាស់