frontrow Front Row Teacher Edition Control for Windows Software User Guide

ការណែនាំអំពីការកំណត់រចនាសម្ព័ន្ធកម្មវិធី

FrontRow Teacher Edition Control for Windows

រក្សាសិទ្ធិ
Software: © 2014 FrontRow Calypso LLC, part of the William Demant Holding Group.
Patent US 7,822,212 and other patents pending.

Service Marks and Trademarks
Juno, OptiVoice, FrontRow are trademarks of FrontRow Calypso, LLC

Other brands, product names, company names, trademarks and service marks are the properties of their respective holders. This document might contain references to third party sources of information, or software, products or services and/or third party web sites (collectively the “Third-Party Information”). FrontRow does not control, and is not responsible for, any Third-Party Information, including, without limitation the content, accuracy, copyright compliance, compatibility, performance, trustworthiness, legality, decency, links, or any other aspect of Third-Party Information. The inclusion of Third-Party Information in this document does not imply endorsement by FrontRow of the Third-Party Information or the third party in any way.

សេចក្តីផ្តើម

The FrontRow Teacher Edition Control software works in conjunction with a FrontRow ezRoom or Juno Connect system and provides AV control right from the user’s desktop. This guide outlines how to configure the software, for more about using the Teacher Edition, see the Teacher Edition user guide available at gofrontrow.com.

Before beginning, you will need the IP address of the FrontRow control device the Teacher Edition software will be used with in the room as well as the IP address of any other network devices that may be controlled over the network. If it will be used with a FrontRow Conductor IP based paging / alert and intercom system, you will also need the IP address of the Conductor server.

Opening the Control Editor

1. Open the FrontRow Teacher Edition application (Image 1)
   For installation instructions for the Teacher Edition software, please see the Teacher Edition User Guide 
2. Click the Control button to open the Teacher Edition Control window (Image 2)
3. Click the Edit button to open the control editor (Image 3)

រូបភាព ០១

រូបភាព ០១

រូបភាព ០១

Setting up Devices

Any device that has an IP address that will be used with the Teacher Edition software needs to be defined. For example you will need the IP address of the control device in the room, and if being used with Conductor you will need the IP address of the DRS5000 server.

Global Settings can also be used to define ports or serial commands that may get used for multiple buttons. See Action Types for more information.

1. Click the + button under the Global Settings section. រូបភាព ០១

2. Type a name for the device so that it is easily recognizable later. For example, use Juno Connect or DRS5000 server.

3. In the Value box, type the IP address of the device on the network you are using.

4. Once completed, your Global Settings should look like something like image 6.

រូបភាព ០១

To delete an item, highlight it and click the – button.
រូបភាព ០១

កំណត់រចនាសម្ព័ន្ធប៊ូតុង

Configure what will appear on the button

1. Open the Control Editor by clicking Edit from the Control window
2. On the Control window, click the button you want to configure (Image 7)
3. In the Editor window, type the name in the Title box that you want to appear on the button. (Image 8)
4. Choose the icon you want to appear on the button.
5. To have the command repeat when the button is held, check the box (this is useful for a volume control, for exampលេ) ។
6. Enter the repeat delay.

រូបភាព ០១

រូបភាព ០១

Define what the buttons will do

1. Click the + button under the Actions section (Image 8)
2. Type a description for the Action to be programmed (image 9).
3. Choose the Action type to be programmed by clicking the drop down menu.
   For more about Action types see ប្រភេទសកម្មភាព នៅទំព័រទី 4 ។

រូបភាព ០១

ប្រភេទសកម្មភាព

Controller Event

Events to control devices are defined on FrontRow controllers. The Teacher Edition Control application can be programmed to trigger those events. Within the configuration pages of the FrontRow Controller (CB6000, CB2000, Juno Connect) the events are numbered (see the installation guides for those devices).

1. Type a description for the event
2. Type the number that matches the event number on the FrontRow controller that you would like the button in the Teacher Edition to trigger.
3. For the Controller Address, choose the controller defined in the section on Setting up Devices on page 2.

Conductor Call

With a FrontRow intercom device in an ezRoom or Juno connect, the Teacher Edition can be used to make a direct intercom call request to Conductor notification sites.

1. Type a description for the event
2. For the server address, choose the DRS5000 server address defined in the section on Setting up Devices on page 2.
3. For the Caller Address, choose the device in the room defined in the section on Setting up Devices on page 2.
   ចំណាំ៖ The caller device must be defined in the Conductor “Devices” table. For more information, see the Conductor installer guide available at gofrontrow.com.

Conductor Alert

Teacher Edition can send a text alert to Conductor notification sites. Configure what text will be sent using a Conductor Alert

1. Type a description for the event
2. For the server address, choose the DRS5000 server address defined in the section on Setting up Devices on page 2.
3. For the Caller Address, choose the device in the room defined in the section on Setting up Devices on page 2.
4. Type the text to appear in the alert at the Conductor Admin station

Conductor / Maestro Trigger

The Teacher Edition can be used to trigger an event defined in either the Conductor system software or in the Maestro management software.

1. Type a description for the event
2. For the server address, choose the DRS5000 server address defined in the section on Setting up Devices on page 2.
3. For the Server Type, choose whether the action is stored within the Conductor System software or in the Maestro management software.
4. Type the trigger name defined in either the Conductor System software or the Maestro management software.

Controller Serial Transmit (#COM)

This is the action used to cause a remote device like the FrontRow CM3000 to send a serial command to a connected device like a projector. This is especially useful on the CM3000 where there may not be enough internal events available to be able to use the simpler “Controller Event” action to invoke a serial command.

1. Type a description for the event

2. Enter the serial command that the controller device will execute. The serial text will be defined by the device (e.g. projector) and will be included in the documentation for that device.

ចំណាំ៖ To save time, a command can be created as a Global Setting if multiple serial transmit commands are being programmed for different buttons. Define the basic syntax using the instructions on page 2 in the section on Setting up Devices.

4. For the CM Address, choose the Controller device that will execute the command, defined in the section on Setting up Devices on page 2.

5. For the CM Port, define the port as a Global Setting in the same way a device is defined in the section on Setting up devices. For a FrontRow device the default port is 7262.

6. Wait time. This should only be changed if directed to do so by a FrontRow support representative.

HTTP Get Request

Use the HTTP Get Request to control a non-FrontRow device with browser based control. The documentation from the device will give the exact string to enter. This action can also be used in place of the “Conductor/Maestro Trigger” action in the event that the literal trigger string given in the Conductor or Maestro interface is to be used.

1. Type a description for the event
2. Insert the string from the documentation of the device.

Raw Network Socket

Use the Raw Network Socket action to control a non-browser based device that uses TCP/IP communication protocol.

1. Type a description for the event
2. Enter the command data that the controller device will execute. For help with the syntax of the kinds of commands used by FrontRow devices, please see the Calypso Action Control Language (CACL) document, available at gofrontrow.com.
   ចំណាំ៖ To save time, a command or some parts of a command can be created as a Global Setting if multiple commands are being programmed for different buttons. Define the basic syntax using the instructions on page 2 in the section on Setting up Devices. Click insert and choose the desired definition. Once the basic syntax (e.g. #COM1[T2,”enter command”]; has been inserted, type the specific action for each of the buttons.
3. For the CM Address, choose the Controller device that will execute the command, defined in the section on Setting up Devices on page 2.
4. For the CM Port, define the port as a Global Setting in the same way a device is defined in the section on Setting up devices. For a FrontRow device the default port is 7262.
5. The Wait Time value will rarely need to be changed. But some devices will not function properly if the sender closes the network connection before the device is finished processing the command. For those devices this value may need to be adjusted.

ការកំណត់រចនាសម្ព័ន្ធ Files

Export or Import Configuration Files

Use the Export and Import functions to share configuration files across multiple computers.

1. Configure the buttons and Global Settings following the instructions in this guide.

2. Verify that the configuration works properly by testing the buttons that have been configured.

3. ចុចប៊ូតុងការកំណត់។

4. ចុចនាំចេញ។

5. Name the configuration file ហើយចុច រក្សាទុក។

បន្ទាប់មកយក file to another computer and import the file.

6. ចុចប៊ូតុងការកំណត់។

7. ចុច នាំចូល។

8. កំណត់ទីតាំង file ហើយចុចបើក។

9. Choose whether or not to import the global settings when prompted. This is useful when devices with the same IP address will be used across rooms (the DRS5000 server for example). For devices with different IP addresses, you will need to change the IP address, but not the name.

ការកំណត់ពាក្យសម្ងាត់

A password can be set to protect the configuration of the Teacher Edition Control from being changed.

To enable a password:

1. ចុចប៊ូតុងការកំណត់។
2. Click Require Password to Edit.
3. Enter the password in the dialogue and confirm.
4. ចុចរក្សាទុក។

To disable a password:

1. Enter the password to access the control editor.
2. ចុចប៊ូតុងការកំណត់។
3. Click Require Password to Edit.
4. ចុចបិទ។
5. ចុចរក្សាទុក។

---

© 2025 Boxlight © 2025 FrontRow Calypso LLC FrontRow, Calypso and the names of Phonic Ear, Calypso, and FrontRow products are trademarks or registered trademarks of FrontRow Calypso LLC in the U.S. and other countries.

821-5082-145/Rev A   0514

ឯកសារ/ធនធាន

frontrow Front Row Teacher Edition Control for Windows Software [pdf] ការណែនាំអ្នកប្រើប្រាស់ Front Row Teacher Edition Control for Windows Software, Edition Control for Windows Software, Control for Windows Software, Windows Software, Software

ឯកសារយោង

• សៀវភៅណែនាំអ្នកប្រើប្រាស់