Esslinger S-One All-In-One Audio System
លក្ខណៈបច្ចេកទេសផលិតផល
- ម៉ាក៖ ESSLINGER
- ឈ្មោះផលិតផល៖ All-in-One audio system
- ម៉ូដែល៖ s/one
- ក្រុមហ៊ុនផលិត៖ Esslinger Technology (Shenzhen) Limited
ការពិពណ៌នា
- វិមាត្រ (W*H*D)៖ 280*280*280 mm, including indicator lights: 310mm
- ទំងន់សុទ្ធ៖ 13.5 គីឡូក្រាម
- សម្ភារៈ៖ The cabinet features anodized aluminum finishing; the rear panel is made of ABS
- APP Features: Volume control, power on/off, EQ, light setting
- ថាមពលបញ្ចេញ៖ 300W (50W tweeter + 100W mid-woofer*2)
- ការឆ្លើយតបប្រេកង់៖ 20Hz ~ 20KHz
- Signal to Noise Ratio (s/n): > 100dB (A-weighted)
ការណែនាំអំពីការប្រើប្រាស់ផលិតផល
ការតភ្ជាប់ថាមពល៖
Plug the provided power cable into the power input of the All-in-One audio system and connect the other end to a power outlet.
ការភ្ជាប់ប៊្លូធូស៖
To connect your device via Bluetooth, ensure the Bluetooth feature is enabled on your device. Press the Bluetooth button on the audio system to enter pairing mode. Select the “s/one” model from the available devices in your device’s Bluetooth settings.
ការជ្រើសរើសការបញ្ចូលសំឡេង៖
You can choose to connect your audio source via optical audio input or USB-C. Use the corresponding cable to connect your device to the audio system.
ការដំឡើងវ៉ាយហ្វាយ៖
If you prefer a WiFi connection for audio streaming, follow the instructions in the user guide to connect the audio system to your WiFi network.
EQ and Light Settings:
You can adjust the equalizer settings and light settings using the controls provided on the All-in-One audio system. Experiment with different settings to customize your audio experience.
បើក/បិទថាមពល៖
To turn the audio system on or off, use the power button located on the device. Make sure to power off the system when not in use to conserve energy.
បញ្ជីវេចខ្ចប់
- S/one All-in-One audio system
- ការណែនាំអ្នកប្រើប្រាស់
- ខ្សែថាមពល
- Product warranty form
ជាងview
ការបញ្ជាក់
| ការពិពណ៌នា | លម្អិត |
| វិមាត្រ W*H*D(mm) | 280 * 280 * 280 មម （including indicator lights:310mm） |
| ទំងន់សុទ្ធ | 13.5 គីឡូក្រាម |
| សម្ភារៈ | The cabinet features anodized aluminum finishing rear panel is made of ABS |
| លក្ខណៈពិសេស APP | volume control, power on off, EQ, light setting |
| ថាមពលបញ្ចេញ | 300W （50W tweeter + 100W mid-woofer）*2 |
| ការឆ្លើយតបប្រេកង់ | 20Hz ~ 20KHz |
| Signal to Noise Ratio(s/n) | > 100dB (A-weighted) |
| ការបង្ខូចទ្រង់ទ្រាយអាម៉ូនិកសរុប (THD) | <0.01% |
| កំណែប៊្លូធូស | 5.4 |
| ការបញ្ចូលសំលេងអុបទិក | 44.1kHZ to 192KHz |
| USB-C | USB storage MP3, WMA, Flac, WAV, AIFF |
| WIFI audio | TuneIn, Qobuz, internet radio, QQ music, TIDAL Connect, Spotify Connect, AirPlay 2, Roon Ready |
| វ៉ាយហ្វាយ | IEEE 802.11b/g/n, 2.4Ghz |
| តម្រូវការថាមពល | 220-240V~ 50/60Hz 100-120 ~ 50/60Hz |
រៀបចំ
ចំណាំ៖ Ensure that the power cord, power plug, and product are compatible with your AC power supply and wall outlet.
- ការតភ្ជាប់ថាមពល
- Insert the power cord into the power input port on the rear panel of the speaker.
- Then plug the other end into a standard wall outlet.
- After power is connected, the speaker’s indicator lights will light up. Note: Always unplug the power cord from the wall outlet first before disconnecting it from the speaker.
- បើក/បិទថាមពល
- បើកថាមពល៖ Press the power button on the rear panel of the speaker once. The indicator lights will illuminate with a breathing effect; when the lights stay steadily on, the startup is complete.
(For the first power-on, the indicator lights’ default color is orange. You can adjust the light color via the Esslinger APP.) - បិទថាមពល៖ Press and hold the power button for 3 seconds until the indicator lights turn off, or you can also turn off the product via the APP.
- បើកថាមពល៖ Press the power button on the rear panel of the speaker once. The indicator lights will illuminate with a breathing effect; when the lights stay steadily on, the startup is complete.
ការដំឡើងការតភ្ជាប់
- ការកំណត់រចនាសម្ព័ន្ធវ៉ាយហ្វាយ
ចំណាំ: Ensure that the Wi-Fi and Bluetooth of your smartphone/tablet are enabled simultaneously, then open the Esslinger APP and select the Wi-Fi connection mode.- Open Esslinger APP. For the first time connection, it will automatically search for the products. Please follow the instructions to set up.
- Select the product you want to connect to.
- Connect to the network. Please ensure that the selected network is consistent with the network your device is connected to.
- Enter the WIFI password and confirm the connection.
- Connection successful, you will automatically enter the homepage, and the indicator lights will stay orange.
At this point, you can use the device to play music.
*If the product cannot be found in the APP, double-click the power button on the rear panel. Wait for the indicator lights to flash (the speaker will then enter pairing mode). Then, go to the “Wi-Fi” section in your phone’s “Settings”, find and select s/one to connect, and then return to Step b to continue the connection.
- ការតភ្ជាប់ប៊្លូធូស
- ការតភ្ជាប់ដោយផ្ទាល់
- បើកប៊្លូធូសនៅលើឧបករណ៍របស់អ្នក (ស្មាតហ្វូន ថេប្លេត កុំព្យូទ័រ)។
- In your device’s Bluetooth settings list, select S/one to pair
- When the device is successfully connected, the indicator lights will turn to steady blue
- ការតភ្ជាប់ APP
- Ensure that your device (smartphone, tablet, computer) Bluetooth has been turned on before opening the APP.
- Select Bluetooth connection in the APP
- Select your s/one product to control it.
- When the device is successfully connected, the indicator lights will stay blue.
- ការតភ្ជាប់ដោយផ្ទាល់
- Other Input Methods
Connect via the audio input ports on the rear panel of the product. Please download the Esslinger APP for use and ensure your device (smartphone, tablet, etc.) has been connected to the product.- ការបញ្ចូលអុបទិក៖ Connect a player via the optical port on the rear panel of the product. In the APP, select “Optical” as the source to play audio files from the input source and adjust the volume.
- បញ្ចូល USB-C៖ After inserting a device such as a USB-C interface hard drive, select “USB-C” as the source in the APP to play audio files from the input source and adjust the volume. Note: The s/one product does not include an audio cable.
ការប្រុងប្រយ័ត្ន៖ During firmware update, it is recommended to stop playing music for 10 minutes to ensure a smooth update. You can resume play once the firmware update is completed.
សេចក្តីណែនាំអំពីសុវត្ថិភាព
Built-in Power Supply and Electronic Components
The built-in power supply and electronic components shall only be replaced or repaired by professional technicians to prevent damage that may lead to overheating, fire, or injury. Repairs conducted by non-professionals or the use of non-genuine parts may affect the safety and functionality of the device. The built-in power supply and electronic components must be recycled or disposed of separately from household waste. Please handle batteries in compliance with local environmental protection regulations. For more detailed information on the replacement of power supplies and electronic components, please visit esslingeraudio.com.
ទាក់ទងមកយើងខ្ញុំ
អ៊ីមែល៖ info@esslinger.group
សំណួរដែលសួរញឹកញាប់
How can I reset the All in One audio system to factory settings?
To reset the audio system to factory settings, locate the reset button on the device -refer to the user manual for the exact location- and press it for 10 seconds. The system will reset to its original settings.
ឯកសារ/ធនធាន
 |
esslinger S-One All In One Audio System [pdf] ការណែនាំអ្នកប្រើប្រាស់ S-One, S-One All In One Audio System, All In One Audio System, Audio System |