បន្ទះ LED-ALIN2 ស៊េរីស្ថាបត្យកម្មលីនេអ៊ែរ
“
លក្ខណៈបច្ចេកទេសផលិតផល
- ម៉ាក៖ អំពូល LED Envision
- Model: LED-ALIN2 Series
- Available Sizes: 1ft, 2ft, 4ft, 6ft, 8ft
- សីតុណ្ហភាពពណ៌៖ 5 CCT (សីតុណ្ហភាពពណ៌ជាប់គ្នា)
ជម្រើស
ការណែនាំអំពីការប្រើប្រាស់ផលិតផល
ការណែនាំអំពីការលើក
Follow these steps for hoisting the LED light:
- Install hanging plates and grounding wire.
- Installation and wiring of disc junction box.
- Install the suspension screw.
ការណែនាំអំពីការដំឡើង
To mount the LED light:
- ភ្ជាប់ Lamp Bodies: Remove the end cover, insert the connector
ចូលទៅក្នុង lamp body, and secure with screws. - Install the border strip and U-shaped insert as per the
provided kit. - Adjust the screws after inserting into the ceiling for proper
ការតម្រឹម។
ការដំឡើងជញ្ជាំង
- Drill a hole in the wall and insert the wall anchor.
- Pull out the pre-buried wire and connect it to the power cord
នៃ lamp. - Fix the mounting piece to the wall using self-tapping
វីស។ - Plug the power cord back in, snap the lamp into place, and
arrange the power cord neatly.
FAQ (សំណួរដែលសួរញឹកញាប់)
Q: Where should I not use this product?
A: Do not use this product in places with a large quantity of
lamp black and smoke (e.g., kitchen), areas with chemical corrosive
substances (e.g., chemical plant), or locations with poor
temperature conditions and large-scale temperature variations.
“`
ការលើក
WWW.ENVISIONLEDLIGHTING.COM
LED ALIN2 Installation Instructions
LED-ALIN2-1FT-3P12-D-5CCT-WH LED-ALIN2-2FT-3P25-D-5CCT-WH LED-ALIN2-4FT-3P50-D-5CCT-WH LED-ALIN2-6FT-3P75-D-5CCT-WH LED-ALIN2-8FT-3P100-D-5CCT-WH
យុថ្កា
តង្កៀបពិដាន
Washers Mounting Screws Canopy A Strain Relief
Canopy B
KIT: M4 12 Pan Head Cross Screw X2
KIT: Ø5*12 Shim X2
Aircraft Cable Coupling
ខ្សែយន្តហោះ
Aircraft Cable Gripper
X2
Install hanging plates and grounding wire
X1
X1
Installation and wiring of disc junction box
X2 Install the suspension screw
ជំហានទី 1
ជំហានទី 2
ជំហានទី 3
ភ្ជាប់ Lamp សាកសព
WWW.ENVISIONLEDLIGHTING.COM
Pull the mask off with a suction cup
ដោះវីស
Pull the end cover out
End cover removed
Insert the connector into the lamp រាងកាយ
ចាក់សោវីស
Pull the butt cord and connect the lamp តែប៉ុណ្ណោះ
ចាក់សោវីស
Aluminum Frame Embedded Inside Out
WL
WWW.ENVISIONLEDLIGHTING.COM
Dimensions 2ft.
L
24.7"
W
4ft. 6ft.
48.7″ 72.7″ 2.29″
១០០ ហ្វីត។
96.7"
!
Kit: M4*8 Round head
dovetail screw
2ft: 8PCS. 4ft: 10PCS. 6ft: 12PCS. 8ft: 14PCS.
Screw: M4*50×2
Install the border strip
វីស X2
Install the U-shaped insert
វីស
Adjusting screw after inserting into ceiling
Batch Gray Embeding
Dimensions 2ft.
4ft. 6ft.
១០០ ហ្វីត។
W
L
24.7" 48.7" 72.7" 96.7"
W
2.29"
!
L
Kit: M4*25 Countersunk Cross Self-Tapping Screw
Kit: Ø4*12 Shim
2ft: 6PCS. 4ft: 8PCS. 6ft: 12PCS. 8ft: 16PCS.
Kit: Expansion Glue Nail
Embedded Ceiling
Install a batch of gray strips
Kit: M4*8 Round head
dovetail screw
2ft: 10PCS. 3ft: 10PCS. 4ft: 12PCS. 6ft: 16PCS. 8ft: 20PCS.
ម្នាងសិលា
Aluminum Frame Embedded Outside In
W
WWW.ENVISIONLEDLIGHTING.COM
!
L
Kit: M4 Rivet Nut X2
X2
Dimensions 2ft.
L
24.7"
W
4ft. 6ft.
48.7″ 72.7″ 2.29″
១០០ ហ្វីត។
96.7"
Screw: M4*50×2
Kit: M4*8 Round head
dovetail screw
2ft: 8PCS. 4ft: 10PCS. 6ft: 12PCS. 8ft: 14PCS.
Install the Rivet Nut
Install the Border Strip
វីស X2
Install the U-shaped insert
វីស
ភ្នំផ្ទៃ
វីស
Adjusting screw after inserting into ceiling
វីស
វីស
ជំហានទី 1
Screw C clip and U shape metal plate together
ជំហានទី 2
Fix them with junction box
ជំហានទី 3
Fix the orther C clip into the ceiling
ជំហានទី 4
Cover the junction box with round metal plate
ជំហានទី 5
Secure the light with installed C clips
ជំហានទី 6
ការដំឡើងជញ្ជាំង
ជំហានទី 1
1. Drill a hole in the wall 2. Insert the wall anchor (2). 3. Pull out the pre-buried wire in the wall through
the mounting piece (4) and connect it to the power cord of the lamp (6). 4. Fix the mounting piece (4)to the wall and tighten it with the self-tapping screw (5).
WWW.ENVISIONLEDLIGHTING.COM
Step 2 5. Move the lamp close to the mounting piece (6), plug the power cord
back into the wall, and then snap the lamp into the hook of the mounting piece to complete the fixation. 6. Arrange the power cord (7) to complete the installation.
7
6
CAUTION: Please note that DO NOT use this product in the following places/application 1. The place has a large quantity of lamp black and smoke, such as: kitchen and food
processing factory. 2. The place has a large quantity of chemical corrosive substance, such as: chemical plant
and stockyard etc. 3. The place has poor temperature conditions, large-scale temperature variation, which would
easily lead to broken and damage the product, the applicable operating temperature is between 59° & 113°
Wall Mount Placements
2 ហ្វីត
24"
16"
4 ហ្វីត
48"
6 ហ្វីត
36 "72"
8 ហ្វីត
60 "96"
42"
WWW.ENVISIONLEDLIGHTING.COM
42"
ឯកសារ/ធនធាន
 |
Envision LED LED-ALIN2 Series Architectural Linear LED Fixture [pdf] ការណែនាំអំពីការដំឡើង LED-ALIN2-1FT-3P12-D-5CCT-WH, LED-ALIN2-2FT-3P25-D-5CCT-WH, LED-ALIN2-4FT-3P50-D-5CCT-WH, LED-ALIN2-6FT-3P75-D-5CCT-WH, LED-ALIN2-8FT-3P100-D-5CCT-WH, LED-ALIN2 Series Architectural Linear LED Fixture, LED-ALIN2 Series, Architectural Linear LED Fixture, Linear LED Fixture, LED Fixture, Fixture |