ECHTPOWER 1133 Wireless Game Controller

វេទិកាដែលគាំទ្រ
Windows 7 and above, NS 3.0 and above, Android 8.0 and above, iOS 18 and above

មាតិកាកញ្ចប់

• Game Controller x1
• Controller Charging Dock x1
• Controller Receiver x1
• ខ្សែសាកប្រភេទ -១ x ១
• សៀវភៅណែនាំអ្នកប្រើប្រាស់ x1

លក្ខណៈបច្ចេកទេសផលិតផល

ម៉ូដែលផលិតផល	1133
វិមាត្រផលិតផល	110 * 158 * 75 មម
ទំងន់ផលិតផល	380 ក្រាម។
ថាមពលសាក	5V/0.5A អតិបរមា
ពេលវេលាសាកថ្ម	3H
អាយុកាលថ្ម	6-8H
សមត្ថភាពថ្ម	800 mAh

ផែនទីប៊ូតុងឧបករណ៍បញ្ជា

សេចក្តីណែនាំសម្រាប់ការប្រើប្រាស់

Before using for the first time, charge the controller to activate it.

Bluetooth Connection to Switch

1. With the controller powered off, toggle the switch to the NS position.
2. Hold the Home button for 3 seconds until the LED light flashes white.
3. Turn on the Switch console to access the pairing interface, and wait for the Bluetooth pairing to complete.

Wired Connection to Switch

• After connecting the controller to the Switch console via a USB cable, press any button on the controller to wake it up, and it will be ready for use.
• When the cable is disconnected, the controller automatically switches to Bluetooth connection with the Switch console.

Connect the Receiver to the PC

1. With the controller turned off, flip the switch to the receiver position.
2. Press and hold the home button for 3 seconds until the LED light flashes red.
3. Plug the receiver into the PC’s USB port, press and hold the pairing button on the receiver for 3 seconds until the LED light flashes, and wait for pairing to complete.
4. Once pairing is successful, the LED indicator on the receiver will remain lit.
5. Alternatively, you can plug the receiver into the controller’s base, connect the base to the PC via the data cable, and follow the above pairing steps.

ការភ្ជាប់ខ្សែទៅកុំព្យូទ័រ
Use a data cable to connect the controller to your computer, then press the home button on the controller to start up and use it normally. BLUETOOTH CONNECTION (PC/iOS/ANDROID PHONE/ TV) 

• When the controller is turned off, switch the power switch to “Bl mode. Press and hold the Home button for 3 seconds until the LED light flashes blue (entering pairing mode).
• Open the device’s Bluetooth settings, search for and connect to “Xbox Wireless Controller.

CONTROLLER PC MODE SWITCH 

• After the controller is properly connected to the PC, the initial state is XInput mode. Device name: Xbox 360 controller, LED display: red steady light
• នៅក្នុងរបៀប Xinput ចុចឱ្យជាប់buttons simultaneously for 3 seconds to switch to Dinput mode. Device name: Gamepad, LED display: red and blue LEDs lit.
• In Dinput mode, press and hold thebuttons for 3 seconds to switch to NS mode. Device name: Pro Controller, LED display: blue LED stays on.
•  In NS mode, holding down thebuttons simultaneously for 3 seconds switches back to Xinput mode.

*Note: Mode switching is only available when connected via a wired connection or receiver. Mode switching is not supported when connected via Bluetooth (including PC) or other devices.

RAPID FIRE FUNCTION (TURBO FUNCTION)

• Supported buttons: ABXY buttons, LB/RB buttons, LT/RT triggers.
  Manual Rapid Fire: Hold down the M button and press the desired button once to activate the manual rapid fire function.
• Automatic Rapid Fire: After setting manual rapid fire, hold down the M button again and press the same button once to switch to the automatic rapid fire function.
• Burst Fire Clear: After setting burst fire, hold down the M button and press the same button once to disable the burst fire function.
• Clear All Burst Fire at Once: Hold down the M button for 5 seconds to disable the burst fire function for all buttons.

BACK BUTTON PROGRAMMING FUNCTION

ការកំណត់ប៊ូតុងថយក្រោយ

• Supported buttons: ABXY, D-pad, LB, RB, LT, RT, L3, R3.
• Setup Method: After successfully connecting the controller, hold down the M1 or M2 button, then press the M button for 2 seconds. The status indicator light will flash slowly. Release all buttons at this point. Then input the action buttons you wish to record in sequence. After the recording is complete, press the M1 or M2 button again to finish the setup. The controller will vibrate once.
• Up to 16 buttons can be recorded.

Back Button Clear ef

• Unlocking method: Hold down the M1 or M2 button, then press the M button for 2 seconds. The status indicator light will flash slowly. At this point, press the M1 or M2 button again to clear the back button (M1 or M2) you wish to delete.
  

 VIBRATION INTENSITY ADJUSTMENT FUNCTION 

• After successfully connecting the controller to the device, press and hold the M key, then push the left joystick up and down to adjust the motor vibration intensity.
• The motor vibration intensity has four levels: 100%-60%-30%-0%. The factory default vibration intensity level is 60%.

RGB LIGHT MODE SWITCHING FUNCTION 

•  Four RGB light modes: asynchronous different colors breathing, synchronous same colors breathing, synchronous different colors breathing, and mixed colors.
•  Press the M key + R3 key once to switch the light mode once.

RGB LIGHT BRIGHTNESS ADJUSTMENT FUNCTION 

• Three levels of RGB light brightness: 100%-60%-30%, factory default is 100% brightness.
• Decrease brightness: Hold down the M key and tilt the left joystick to the left.
• Increase brightness: Hold down the M key and tilt the left joystick to the right.
• Tum RGB on and off: Hold down the M key+ R3 key for 5 seconds.

Tum RGB on and off: Hold down the M key+ R3 key for 5 seconds. 

• Place the controller flat on a table and ensure that it is turned off.
• Press the L3 and R1 buttons simultaneously and wait for the controller’s LED light to flash red and green alternately to enter calibration mode.
• Press the A button, and the blue LED light will illuminate. Then pick up the controller and rotate the left and right joysticks three times each, and press the long-travel trigger all the way down three times.
• Press the A button again. The green LED light will illuminate, indicating calibration is complete. The controller will automatically power off  L3 button+RB button

កំណត់ឧបករណ៍បញ្ជាឡើងវិញ
When the controller malfunctions or freezes, simply charge the controller to reset it.

មុខងារផ្សេងទៀត។
For functions such as firmware updates, key setting changes, and joystick dead zone adjustments, please download the  Keylinker application to configure settings.

ព័ត៌មានទំនាក់ទំនង

• ទូរស័ព្ទ៖ 0755-21010839
• អ៊ីមែល៖ service@echtpower.com
• Web: www.echtpower.com
• ក្រុមហ៊ុនផលិត: Shenzhen Mike Morgen Technology Co., Ltd
• អាស័យដ្ឋាន៖ បន្ទប់លេខ 302 ជាន់ទី 3 អាគារ 5 តំបន់ C សួនវិទ្យាសាស្ត្រ និងបច្ចេកវិទ្យា Jinxiu Huacheng លេខ 36 Xiangjiaotang ផ្លូវទីពីរ សហគមន៍ Xiangjiaotang ផ្លូវ Bantian ស្រុក Longgang ក្រុង Shenzhen

សេចក្តីប្រកាសនៃការអនុលោមភាព

គំរូ: 1133
សេចក្តីថ្លែងការណ៍នៃការអនុលោមភាព
The product conforms to EC standards for radio interference. Here, Shenzhen Mike Morgen Technology Co.,Ltd .in Shenzhen announces that 1133 radio equipment conforms to the Directive EN IEC 62368-1:2020+A11 :2020;EN 50663:2017,EN 62479:2010;ETSI EN 301 489-1 V2.2.3(2019-11 );ETSI EN 301 489-17 V3.2.4(2020-09);ETSI EN 300 328 V2.2.2(2019-07).
អត្ថបទពេញលេញនៃសេចក្តីប្រកាសនៃការអនុលោមរបស់សហភាពអឺរ៉ុបអាចរកបាននៅលើ: www.echtpower.com

The product conforms to UK standards for radio interference. Here, Shenzhen Mike Morgen Technology Co.,Ltd .in Shenzhen announces that 1133 radio equipment conforms to the Directive EN IEC 62368-1:2020;BS EN 50663:2017,BS EN 62479:2020; ETSI EN 301 489-1 V2.2.3(2019-11 ); ETSI EN 301 489-17 V3.2.4(2020-09); ETSI EN 300 328 V2.2.2(2019-07).
អត្ថបទពេញលេញនៃសេចក្តីប្រកាសនៃការអនុលោមតាម UKCA អាចរកបាននៅលើ:
www.echtpower.com

សេចក្តីថ្លែងការណ៍របស់ FCC

ឧបករណ៍នេះអនុលោមតាមផ្នែកទី 15 នៃច្បាប់ FCC ។ ប្រតិបត្តិការគឺស្ថិតក្រោមលក្ខខណ្ឌពីរដូចខាងក្រោមៈ

1. ឧបករណ៍នេះប្រហែលជាមិនបង្កឱ្យមានការជ្រៀតជ្រែកដែលបង្កគ្រោះថ្នាក់ និង
2. ឧបករណ៍នេះត្រូវតែទទួលយកការជ្រៀតជ្រែកណាមួយដែលទទួលបាន រួមទាំងការជ្រៀតជ្រែកដែលអាចបណ្តាលឱ្យប្រតិបត្តិការដែលមិនចង់បាន។

ការព្រមាន FCC៖
ការផ្លាស់ប្តូរ ឬការកែប្រែណាមួយដែលមិនមានការយល់ព្រមច្បាស់លាស់ដោយភាគីដែលទទួលខុសត្រូវចំពោះការអនុលោមភាពអាចចាត់ទុកជាមោឃៈសិទ្ធិអំណាចរបស់អ្នកប្រើប្រាស់ក្នុងប្រតិបត្តិការឧបករណ៍។
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there isno guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• តំរង់ទិស ឬផ្លាស់ប្តូរទីតាំងអង់តែនទទួល។
• បង្កើនការបំបែករវាងឧបករណ៍និងអ្នកទទួល។
• ភ្ជាប់ឧបករណ៍ទៅក្នុងព្រីភ្លើងនៅលើសៀគ្វីខុសពីឧបករណ៍ទទួលត្រូវបានភ្ជាប់។
• ពិគ្រោះជាមួយអ្នកចែកបៀ ឬអ្នកបច្ចេកទេសវិទ្យុ-ទូរទស្សន៍ដែលមានបទពិសោធន៍ ដើម្បីទទួលបានជំនួយ។

ឧបករណ៍នេះត្រូវបានវាយតម្លៃដើម្បីបំពេញតាមតម្រូវការទូទៅនៃការប៉ះពាល់ RF ។ ឧបករណ៍នេះអាចត្រូវបានប្រើនៅក្នុងលក្ខខណ្ឌនៃការប៉ះពាល់ចល័តដោយគ្មានការរឹតបន្តឹង។

FCC ID: 2BHV8-1133
និមិត្តសញ្ញានេះមានន័យថាផលិតផលមិនគួរត្រូវបានបោះចោលជាមួយកាកសំណល់តាមផ្ទះទេ ប៉ុន្តែត្រូវនាំយកទៅកន្លែងប្រមូលផ្ដុំសមស្រប ដើម្បីបើកការកែច្នៃឡើងវិញ។ យោងតាមបទប្បញ្ញត្តិក្នុងស្រុក សូមកុំចោលផលិតផល ឬថ្មដែលអាចសាកបានជាមួយនឹងកាកសំណល់តាមផ្ទះធម្មតា។
ការចោលផលិតផលដែលបានប្រើរួច និងថ្មដែលអាចសាកបានត្រឹមត្រូវ ជួយការពារផលប៉ះពាល់អវិជ្ជមានលើបរិស្ថាន និងសុខភាពមនុស្ស។

ការប្រុងប្រយ័ត្ន

• កុំបញ្ចោញវាទៅរាវ
• កុំរុះរើវា។
• ជៀសវាងការទម្លាក់វា។
• ជៀសវាងសីតុណ្ហភាពខ្ពស់ឬទាបបំផុត។

សំណួរគេសួរញឹកញាប់

What platforms does the gamepad support?

It supports Windows 7 and above, NS 3.0 and above, Android 8.0 and above, iOS 18 and above.

How do I connect the gamepad to a Switch console?

You can connect via Bluetooth or a wired connection using a USB cable.

Can I use the gamepad with my PC?

Yes, you can connect it using a receiver or a USB cable.

How do I switch modes on the PC?

Use the buttons to switch between Xinput, Dinput, and NS modes.

What is the battery life of the gamepad?

The battery life is between 6 to 8 hours.

ឯកសារ/ធនធាន

ECHTPOWER 1133 Wireless Game Controller [pdf] សៀវភៅណែនាំអ្នកប្រើប្រាស់ 1133, 1133 Wireless Game Controller, Wireless Game Controller, Game Controller

ឯកសារយោង

• សៀវភៅណែនាំអ្នកប្រើប្រាស់