DH03 I/O Module Magnetic Force Sensor Module
លក្ខណៈពិសេស៖
- Product Name: DH03 I/O Module
- Connectivity: Network-connected
- Supported Devices: Motion sensors, panic buttons, strobe
lights, sirens, gates, door relays - Compatibility: Eagle Eye Cloud VMS platform
សេចក្តីណែនាំអំពីការប្រើប្រាស់ផលិតផល៖
1. ពិនិត្យខ្លឹមសារកញ្ចប់៖
Open the package and inspect for any damage. Ensure all items
listed in the packing list are present.
2. DH03 Connections:
Refer to the provided image for connection descriptions.
3. Connect the DH03 I/O Module to Power Supply:
Connect the module to a network switch using an Ethernet cable.
If the switch doesn’t support Power over Ethernet (PoE), connect a
12V power supply to the module.
4. Add the Module to the Cloud VMS:
Use the Eagle Eye Viewer mobile application to add the module to
your Cloud VMS dashboard. Wait for approximately two minutes for it
to appear online with a green check mark.
5. Check Module Operation:
The DH03 I/O Module is configured as a Speaker in the Cloud VMS.
Use the Eagle Eye Viewer app or web interface to add the module to
your account and ensure proper functionality.
សំណួរគេសួរញឹកញាប់៖
Q: How do I know if the DH03 module is properly connected?
A: The module should appear online with a green check mark after
adding it to your Cloud VMS dashboard using the Eagle Eye Viewer
កម្មវិធី ឬ web ចំណុចប្រទាក់។
DH03 I/O Module
មគ្គុទ្ទេសក៍ចាប់ផ្តើមរហ័ស
The Eagle Eye DH03 is a compact, network- connected module that bridges external input/output devices, such as motion sensors, panic buttons, strobe lights, sirens, gates, and door relays, directly into the Eagle Eye Cloud VMS platform. Follow the instructions in this guide to correctly install the module and add it to the Eagle Eye Cloud VMS.
1 Check the Package Contents
Open the package and check the product for obvious damage. Confirm that all items in the packing list are included in the box.
PACKING LIST · DH03 I/O Module · Mounting accessories package · Card with QR link to this Quick Start Guide · Installation template sticker
The DH03 dimensions are below in millimeters.
2 DH03 Connections
Refer to the image below for connection descriptions.
3 Connect the DH03 I/O Module to a
ការផ្គត់ផ្គង់ថាមពល
Attach an Ethernet cable to connect the module to a network switch. If the switch does not provide power over Ethernet (PoE), attach 12V power to the 12V power connector.
Version 1.0 20250806 ©2025 Eagle Eye Networks All rights reserved.
4 Add the Module to the Cloud VMS
Note: The module is initially shown as offline on the
We recommend using the Eagle Eye Viewer mobile application to add the module to your Cloud VMS
dashboard. After two minutes, it should appear online (denoted by a green check mark).
គណនី។
5 Check the Module Operation
Note: The DH03 I/O Module is configured as a Speaker
in the Cloud VMS.
· Go to Layouts in the Eagle Eye Viewer and locate the
module you just added.
To add the module through the Eagle Eye Viewer app:
· Use the Preview tile to check the module’s
មុខងារ។
· Navigate to the Dashboard and click the plus icon in
ខាងលើស្តាំ។
· To add the module to a bridge or CMVR:
Select Add Speaker.
Choose the module you just connected from the
list of Available Speakers. Select the bridge or
CMVR where you want to add the module.
Name the module and choose Save.
Alternately, you can add the module using the Eagle Eye Cloud VMS web interface. To add the module through the web ចំណុចប្រទាក់៖
· Go to the Eagle Eye Cloud VMS web interface and log in with your credentials.
· Go to the Dashboard and click the plus icon in the top right. Click Add Speaker. Go the list of Available Speakers. Click the three dots icon next to the module you just connected from the list and choose Add Speaker. If there are multiple bridges or CMVRs on the account, select the bridge or CMVR where you want to add the module. Name the module and choose Save.
LEARN MORE For more information about Eagle Eye Cameras, visit
www.een.com/hardware/security-cameras/
LEARN MORE Visit our website EEN.COM
UNITED STATES +1-៨៦៦-៤៤៧-២១៩៤ sales@een.com
LATIN AMERICA/CARIBBEAN +52 55 8526 4926 LATAMsales@een.com
EUROPE +31 20 26 10 460 EMEAsales@een.com
ASIA-PACIFIC +81-3-6868-5527 APACsales@een.com
ឯកសារ/ធនធាន
 |
EAGLE EYE DH03 I/O Module Magnetic Force Sensor Module [pdf] ការណែនាំអ្នកប្រើប្រាស់ DH03 IO Module Magnetic Force Sensor Module, DH03, IO Module Magnetic Force Sensor Module, Magnetic Force Sensor Module, Force Sensor Module, Sensor Module |