DeepCool AK400 CPU Cooler ជាមួយនឹងការបង្ហាញស្ថានភាព
លក្ខណៈបច្ចេកទេស
- គំរូ: DeepCool AK400 Digital CPU Cooler
- ភាពឆបគ្នានៃរន្ធ។
- ក្រុមហ៊ុន Intel: LGA 1150/1151/1155/1156/1200/1700
- អេអឹមឌី: AM4/AM5
- Cooling Capacity (TDP): រហូតដល់ 220W
- បំពង់កំដៅ: 4 x 6mm direct-touch copper heat pipes
- អ្នកគាំទ្រ:
- ទំហំ: 120mm x 120mm x 25mm
- ប្រភេទ: Fluid Dynamic Bearing (FDB)
- ល្បឿន: 500–1850 RPM ± 10%
- លំហូរខ្យល់: Up to 68.99 CFM
- កម្រិតសំឡេងរំខាន: ≤28 dB(A)
- ឧបករណ៍ភ្ជាប់៖ 4-pin PWM
- បានវាយតម្លៃវ៉ុលtage: 12V DC
- ការប្រើប្រាស់ថាមពល: 1.44W
- អំពូល LED: Addressable RGB
- ឧបករណ៍ភ្ជាប់: 3-pin (+5V-D-G) and 9-pin USB 2.0
- វិមាត្រ:
- សរុប: 126mm (L) x 97mm (W) x 156mm (H)
- ឧបករណ៍កម្តៅ: 120mm (L) x 60mm (W) x 152mm (H)
- ទម្ងន់៖ ប្រហែល ៦៣ ក្រាម។
ការណែនាំអំពីការដំឡើង និងការដំឡើង
ឧបករណ៍ដែលត្រូវការ
- វីសស្ពឺវីស
- ការបិទភ្ជាប់កំដៅ (ប្រសិនបើមិនបានអនុវត្តជាមុន)
- Cleaning cloth or isopropyl alcohol (for CPU surface prep)
Step 1: Prepare the Motherboard
- Power off your PC and unplug all cables.
- Remove the existing CPU cooler if applicable.
- Clean the CPU surface using a lint-free cloth and isopropyl alcohol to remove old thermal paste.
Step 2: Install the Backplate
- Place the provided motherboard backplate on the rear side of the motherboard.
- Align the holes of the backplate with the CPU socket mounting holes.
Step 3: Attach Standoffs
- Insert the standoffs through the motherboard aligned with the backplate.
- Tighten the standoffs gently; they will hold the cooler firmly in place.
ជំហានទី 4: លាបថ្នាំបិទភ្ជាប់កំដៅ
- លាបម្សៅកំដៅក្នុងបរិមាណតិចតួចទៅកណ្តាល CPU ។
- If your AK400 cooler comes with pre-applied thermal paste, skip this step.
Step 5: Mount the Cooler
- Align the AK400 cooler base over the CPU, ensuring the mounting holes match the standoffs.
- Carefully place the cooler onto the CPU and press gently.
- Secure the cooler using the provided screws in a diagonal pattern to ensure even pressure.
Step 6: Attach the Fan
- Attach the fan to the heatsink using the included clips or screws.
- Ensure the airflow direction is correct (usually indicated by arrows on the fan).
Step 7: Connect the Fan & Display
- Plug the fan power cable into the CPU_FAN header on the motherboard.
- Connect the status display cable to the appropriate motherboard or power header as specified in the manual.
ជំហានទី 8: ការត្រួតពិនិត្យចុងក្រោយ
- Double-check that all screws are tight and the cooler is secure.
- Ensure cables are connected and not obstructing the fan.
- Close the PC case and reconnect the power.
Step 9: Power On & Monitor
- Turn on your PC and check the status display for proper operation.
- Monitor CPU temperatures in BIOS or using software to ensure proper cooling performance.
ព័ត៌មានជំនួយ
- Handle the cooler carefully; the display panel can be fragile.
- Do not overtighten screws; excessive pressure can damage the CPU or motherboard.
- Make sure airflow is not blocked by other components.
- After installing the product, turn on the PC, download and install the software, and the product-function control has been enabled on, webគេហទំព័រ។www.deepcool.com/downloadpage/
- តម្រូវការកំណែប្រព័ន្ធប្រតិបត្តិការ៖ Windows 10 / Windows 11
សំណួរគេសួរញឹកញាប់
How do I install the AK400 Digital?
The cooler comes with an all-metal mounting bracket designed for easy installation on various platforms. Detailed installation instructions are provided in the user manual.
តើខ្ញុំអាចប្ដូរភ្លើង RGB តាមបំណងបានទេ?
Yes, the AK400 Digital features addressable RGB lighting that can be customized using compatible software or motherboard RGB headers.
ឯកសារ/ធនធាន
 |
DeepCool AK400 CPU Cooler ជាមួយនឹងការបង្ហាញស្ថានភាព [pdf] សៀវភៅណែនាំអ្នកប្រើប្រាស់ AK400 CPU Cooler With A Status Display, AK400, CPU Cooler With A Status Display, ការបង្ហាញស្ថានភាព, Display |