COVEENA AL-NS2258 មគ្គុទ្ទេសក៍អ្នកប្រើប្រាស់ឧបករណ៍បញ្ជាប្តូរ

Includes all the buttons and corresponding functions of the original Switch controller, with the 2D degree of burst speed adjustment and motor vibration intensity adjustment.

Provides 4 green LED status Indicators.
Built-in asymmetric dual motors, 5 large motors on the left and J small motors on the right, high pre<:ision 3D rocker.

With a 6-axis gyroscope!]e. fast and accurate targeting.
Compatible with PC console, supports X input mode (wired device name: Xbox 360 Controller).

With custom set buttons and custom mapped keys (macro key function).
Keys with individual motor vibration adjustment.

Bluetooth connection for la prop/Switch/Swil<h Oled/Switch Lite/PC Steam.
Supports the App function.

សាកថ្ម

When not connected, the indicator light flashes when charging and turns off when fully charged.
When connected, the indicator light flashes when charging and stays on when fully charged.

សំឡេងរោទិ៍ថ្មទាប

នៅពេលដែលថ្ម voltage of the controller is lower than 3. SV. The indicator light will flash, indicating that the power is insufficient and needs to be charged.

ដ្យាក្រាមផលិតផល

ការពិពណ៌នាមុខងារ

Wired-guided Bluetooth docking function: The handle is connected to the Switch host via the USB cable (need to be set in the Switch host setup interface: Pro handle wired connection switch is on), unplug the USB cable, and press any key to connect the handle to the Switch host automatically.
របៀបរង់ចាំ៖ Press and hold the “Docking” button for 3 seconds, the handle enters Bluetooth pairing with the host computer, LED1-4 is on, the handle is on, short-press the “Docking” button, the handle is in standby mode.

មុខងារភ្ញាក់: When the Switch is off, press the “HOME” key to wake up the console.
មុខងារផ្ទុះ៖ Press and hold any of the A/B/X/Y/L/ZL/R/ZR keys, then press the “Turbo” key to activate the burst mode. Press the Turbo key + the function key again, and the key will automatically fire a burst. Press again to cancel. Press and hold the “Turbo” button while operating the right 3D up and down to adjust the burst speed, fast, medium, and slow (default medium after locking, 20 times per second for fast, 12 times per second for medium, and 5 times per second for slow, save the current state after switching off). If you press and hold the “Turbo” key for 8 seconds, you can clear all the burst functions with one click. (Note: The keys with automatic burst function are A/B/X/Y/L/ ZL/R/ZR), The manual burst keys are A/B/X/Y/L/ZL//R/ZR/UP/DOWN/LEFT/LIGHT).

Handle pairing: Open the host pairing interface, press and hold the “Docking” key for 3 seconds to enter the pairing state, LED1-4 flashing lights, then the pairing is successful, the corresponding channel light assigned by the host i on; if the pairing fails, the handle will automatically standby after 60 seconds.
Handle wake up: support any key to wake up (except docking key, P, M1, M2, L3, R3, motor vibration adjustment key, RGB light effect setting key, TURBO key). If the joystick is switched off after successful pairing, the joystick will enter the reconnect state after waking up by any key, LED1-4 will be the running light state, and the corresponding channel indicator will be on long after successful pairing.

Key composition: The joystick is operated by P, M1, M2, Up, Down, Left, Right, A, B, X, Y, L, R, ZL, ZR, L3, R3, -, +, Turbo, Home, Screenshot key, Motor vibration adjustment key, docking key, and two analog 3D joysticks
Grip with vibration and vibration intensity adjustment: You can manually turn on or off the motor vibration function in the “Settings” section of the Switch console. When the grip is connected, the default motor vibration intensity is 70% in the “Search Grip” screen of the Switch console. Press the motor vibration adjustment button to adjust the motor vibration intensity to 100%, press the motor vibration adjustment button again to adjust the motor vibration intensity to 0%, press the motor vibration adjustment button again to adjust the motor vibration intensity to 30%, press the moror vibration adjustment button again to adjust the motor vibration intensity to 70%, 70%-100%-0%-30%-70%, long press the motor vibr,ation adjustment button for 3 seconds to ttJm off the motor vibration function. (Press and hold the motor vibration adjustment button for 3 seconds to switch off the motor vibration function and save the current state after switching off.)

About the macro key function operation explanation: M1 and M2 custom keys are set on the back of the handle (mappable function keys are UP, DOWN, LEFT, RIGHT, A, B, X, Y, L, R, ZL, ZR, 3D rocker, and down button).
នីតិវិធីមានដូចខាងក្រោម៖
1. When connected to a host computer or PC, press and hold the Profile key (custom setting key) for 3 seconds to enter the custom setting state, then the middle two LEDs flash (LED2, LED3).
2. Press the M1 key, LED 3 will keep flashing and LED2 will go out, the Ml key will start the customisation, press the “A” key, the “A” key will be mapped to M1, press the Profile key (customisation key) once more to exit the customisation, the channel light will return to the original channel indication. The channel light will return to the original channel indication, set the M2 key again as described above (LED2 will remain flashing while the M2 key is set, and LED3 will go out).
3. The M1 (or M2) key can be set as a macro function key by entering multiple function keys into the M1 (or M2) key in sequence, and when the key is pressed during the game, the function will be displayed according to the interval entered between the function keys during customisation.

M1 and M2 custom keys function clearly: When connected to a host computer or PC, press and hold the Profile key (custom setting key) for 3 seconds to enter the custom setting state, press the key to clear M1 (or M2) once, then press the
គាំទ្រfile key (custom setting key) briefly to exit, it will clear the custom function on the M1 (or M2) key. After clearing, there is no function state. The last used state will remain after the handle is switched off.

How To Connect Your Laptop And Mobile Phone By Bluetooth:
1. Android mode pairing: When the handle is in standby mode, press and hold “A” and “Docking” for 3 seconds at the same time, LED1 will flash, turn on the Bluetooth of the device to be connected, search for the Bluetooth name” Gamepad”, click on the pairing connection, LED1 will be on after the connection.
2. IOS mode pairing: In standby mode, press and hold the “X button” and “Docking button” at the same time for 3 seconds, LED1 and LED2 will flash, turn on the Bluetooth of the device to be connected and search for the Bluetooth name “Xbox Wireless Controller”, click on the pairing connection, LED1 and LED2 will light up after the connection.
3. Bluetooth laptop (Windows system) Pairing: When the controller is in standby mode, press and hold the “X button” and “Docking button” at the same time for 3 seconds, LED1 and LED2 will flash, turn on the Bluetooth of the device to be connected, search for the Bluetooth name “Xbox Click on “Wireless Controller” and click on the pairing button to connect, LED1 and LED2 will light up after connection.

រង់ចាំ

When the joystick is on, short-press the “Docking” button to put the joystick on standby.
When the joystick is paired, it will automatically stand by after 60 seconds if the code cannot be matched.
When the joystick is not operated for a long time, it will automatically sleep after 5 minutes.

កំណត់មុខងារឡើងវិញ

When the joystick is abnormal, it can be reset by pressing and holding the HOME button for 10 seconds.

ទទួលចម្ងាយ

The effective reception distance of the joystick is within 10M.

យោងបច្ចុប្បន្ន

ចរន្តអសកម្ម៖ តិចជាង 20uA
ការផ្គូផ្គងចរន្ត៖ តិចជាង 30mA
Working current (when no vibration): តិចជាង 120mA
Motor vibration current: តិចជាង 200mA

Handle Electrical Specifications

ការផ្គត់ផ្គង់ថាមពល៖ ថ្មប៉ូលីមមានភ្ជាប់ជាមួយ
ពេលវេលាប្រើប្រាស់៖ 6-20 hours (depending on use)
សមត្ថភាពថ្ម៖ 800 mAh
ពេលវេលាសាកថ្ម៖ ប្រហែល 3-4 ម៉ោង។
វ៉ុលសាកtage: DC 5V
ចរន្តសាក: <350mA

ការណែនាំអំពីការតភ្ជាប់ឥតខ្សែ

Click on the main top page icon in the margin of the screen to enter the main menu, as shown below.
Open the “controllers” section of the switch console, as shown below.

Select the “Change Grip/Order” item to enter the grip connection page, as shown below.
After connecting to the host, the host’s assigned grip channel light will be on.

The Grip Gyro Sensor is Factory Calibrated

Place the grip on a flat table, press the “B”, “-“, and “HOME” keys at the same time in sleep mode, the channel lights up (LED1+LED2) and down (LED3+LED4) will blink alternately. The grip enters gyro sensor calibration mode. Press the “+” button and release. After 1 second, the channel light will turn off, and the upper (LED1+LED2) and lower (LED3+LED4) will blink alternately and go out. The gyro sensor calibration is complete.

Factory Mode Setting of the Joystick

Press and hold the left 3D rocker (L3) and right 3D rocker (R3) while the joystick is in sleep mode, then press the “Docking” button. After releasing the “Docking” button, the joystick will return to sleep mode. Please do not press the “Docking” button for more than 2 seconds during the setting process.

Exiting Factory Mode

When the joystick is in factory mode, plug in the USB cable to charge it to exit the forced hibernation mode, and then use the joystick with any key to wake it up. (Docking key, P, M1, M2, L3, R3, motor vibration adjustment key, TURBO key are excluded)

Calibration of the Gyroscope Sensor of the Joystick Using the Switch Main Unit

Once the Switch console is successfully connected to the joystick, return to the main menu and click on “Settings” to enter the settings menu. Scroll down the settings menu, click on “Joystick and sensors”, scroll up the menu list on the right, select “Calibrate gyro sensor”, and click on “Calibrate joystick” in the pop-up menu. “in the pop-up menu. Press and hold the “-” or “+” button on the grip to complete the gyroscope calibration. The gyroscope calibration screen is shown below.

Using the Switch Console to Calibrate the 3D Joystick

Once the Switch console is successfully connected to the joystick, go back to the main menu and click on “Settings” to enter the settings menu. Scroll down the settings menu, click on “Joystick & Sensors”, scroll up the menu list on the right, select “Calibrate Joystick”, press the joystick you want to calibrate, and enter the “Calibrate Joystick” confirmation screen. “Press the’ X’ button on the joystick to bring up the menu, then press the ‘A’ button on the joystick to confirm the calibration. Once you have entered the “Calibrate Joystick” calibration screen, follow the on-screen prompts to complete the upward, downward, leftward, rightward, and circular movements. The joystick calibration screen is as follows.

Connect mobile phone apps.

Instructions for Downloading and Using the App
The app software can be downloaded by searching for “KeyLinker” on platforms such as App Store, Google Play, or by scanning the QR code:

ការធានា និងសេវាកម្មក្រោយពេលលក់

For initial defects within 1 year from the date of purchase, as well as failures, breakages, and other defects that occur in the course of normal use, we will take various measures so that you can have peace of mind.
សូមទាក់ទង COVEENA@outlook.com if you have any questions about the operation or parts that you do not understand during use.
Or
Find Seller: Sign in to Amazon → Your Account → Your Order – Ask a Product Question
Find Amazon Customer Service: Login Amazon.com → Click “Help” at the bottom of the page → Need more help → Contact us.
ការពេញចិត្តរបស់អ្នកគឺជាគោលដៅចុងក្រោយរបស់យើង!

ឯកសារ/ធនធាន

COVEENA AL-NS2258 ឧបករណ៍បញ្ជាប្តូរ [pdf] ការណែនាំអ្នកប្រើប្រាស់
AL-NS2258, AL-NS2258 Switch Controller, AL-NS2258, Switch Controller, Controller

ឯកសារយោង

សៀវភៅណែនាំអ្នកប្រើប្រាស់

COVEENA AL-NS2258 ឧបករណ៍បញ្ជាប្តូរ

ការពិពណ៌នាផលិតផល

លក្ខណៈពិសេសផលិតផល