COMICA Seekcom S1 Wireless Intercom Headset System User Manual

បុព្វបទ

អរគុណសម្រាប់ការទិញasing Comica Seekcom S1 Wireless Intercom Headset System.

លក្ខណៈពិសេសចម្បង

• Full-duplex Digital Wireless Talk, Convenient and Efficient
• Free Switch Between Host and Guest, Flexible Combination
• CalMix® AI/ENC Optional Noise Reduction
• High-definition and Intuitive OLED Display
• Dual Antennas Design Enhance Anti-interference up to 500m (Open Area)
• Long Battery Life Up to 12 Hours
• Talk/PTT/Mute Multiple Talk Modes Options
• 24kHz/16bit Specification, High-fidelity Restoration of Sound Details
• Support Overall Broadcasting, One-to-one Talk, Recorder Modes, etc.
• Support 3.5mm External Audio Input/Cascade Extension
• Support USB-C Digital Audio Transmission
• 150Hz-7KHz Ultra-wide Frequency Response
• Powerful Comica Official APP, One-stop Convenient Control
• IPX3 Waterproof Level, Strong Resistance to Rain and Wind
• Ergonomic Design for Light and Comfortable Wear

Product Usage Notice

The Seekcom S1 supports host/guest switching, but only one device can be set as the host and network node in an intercom system group. All other devices must be set as guests (factory default setting). If you need to reset the host/guest settings, the devices should be re-paired.
Please use the original charging case, audio cable and battery. Accessories that are not certified by the manufacturer or are not original replacements may pose dangers such as electric shock, fire, or explosion.
Please prevent it from falling, collision and pounding, otherwise it may cause product failure.
Please do not disassemble this product by yourself to avoid mechanical damage.

Device Storage Notice

Do not place the product near or inside heating equipment, cooking equipment, high-pressure containers, etc., to prevent battery overheating and explosion, such as microwave ovens, induction cookers, electric ovens, electric heaters, pressure cookers, water heaters, gas stoves, etc.
Please store the device in a dry, cool and clean place.
Please keep the device away from the heat, direct sunlight and other corrosive liquids.

បញ្ជីវេចខ្ចប់

5-set Version:

កាស*១

ថ្ម * ២

មូលដ្ឋានសាកថ្ម*3

USB C-USB A Charging/Data Cable*3

Drawstring Pouch 5

Windmuff*5

Carrying Case 1

Label Sticker 1

សៀវភៅណែនាំអ្នកប្រើប្រាស់*1

ប័ណ្ណធានា*1

កាស*១

ថ្ម * ២

មូលដ្ឋានសាកថ្ម*1

Charging/Data Cable*1 USB C-USB A

Drawstring Pouch 2

Windmuff*2

កាបូបដាក់តាមខ្លួន*1

Label Sticker*1

សៀវភៅណែនាំអ្នកប្រើប្រាស់*1

ប័ណ្ណធានា*1

1-set Version:
កាស*១

ថ្ម * ២

USB C-USB A

Charging/Data Cable*1

Drawstring Pouch*1

Windmuff*1

Label Sticker*1

សៀវភៅណែនាំអ្នកប្រើប្រាស់*1

ប័ណ្ណធានា*1

សមាសធាតុនិងការណែនាំ

កាស៖

1. មីក្រូហ្វូន Capsule
2. ខ្សែក្បាលដែលអាចលៃតម្រូវបាន។
   It can adjust the length of headset
3. អង់តែនខាងក្រៅ
4. Host/Guest Switch Button
   Move up to set it as host; Move down to set it as guest
5. កុងតាក់ប្រអប់ថ្ម
   Move down to open battery compartment cover
6. ច្រក 3.5 ម។
   1. Plug in external earphones
   2. Input external audio
   3. Cascade extension
7. Broadcasting Button
   Press two times to turn on/off broadcasting or ducking function(switch between these two functions via the APP)
   1. Only the host supports broadcasting function
   2. The ducking function is only available in recorder mode (It can be set via the APP).
      After the ducking function is enabled, pressing the ducking button while the “talk sound” and “recorder monitoring sound” are playing in sync can suppress the “recorder monitoring sound” and make the “talk sound” clearer.
8. Mic Stick
   The flip angle is 270 degrees, flip up to mute, flip down to cancel mute
9. Mute/PTT Button
   Short press to turn muting on/off; long press to enter PTT mode
10. Volume+/Communication Mode Button
    Short press to increase volume(6 levels); long press to turn off/on enhanced mode
    1. Only the host supports communication mode. Once enabled, the signal of guests will be changed in sync
    2. The communication mode is divided into enhanced mode and normal mode. The product is set to enhanced mode by default. If there are special requirements for radio frequency or communication, it can be adjusted according to actual needs
11. Volume-/Bluetooth Reset Button
    Short press to decrease the volume(6 levels); long-press for 5 seconds to reset Bluetooth
    1. Long press the volume + and – buttons in sync to enter pairing state
    2. The Bluetooth function is mainly used to connect the host and mobile phone for APP operation. It’s supposed to reset the bluetooth if you change the phone
12. អេក្រង់ OLED
13. ប៊ូតុងបិទ/បើកថាមពល
    Long press to power on/off, short press to switch ENC denoise/Al denoise
14. ច្រក USB
    Connect to power supply for charging/firmware upgrade/audio transmission
15. ពន្លឺសូចនាករការងារ
    

    រដ្ឋ	សូចនាករពន្លឺ
    ផ្ដាច់	Host blinks blue slowly; guest blinks green slowly
    ការផ្គូផ្គង	Host blinks blue quickly; guest blinks green quickly
    ផ្គូផ្គង	Host keeps on blue; guest keeps on green
    កំពុងនិយាយ	Host keeps on blue; guest keeps on green
    បិទសំឡេង	ភ្លើងក្រហមនៅតែបន្ត
    ថាមពលទាប	ភ្លើងក្រហមលោតភ្លឹបភ្លែតៗ

16. វាគ្មិន
17. ការជម្រុញសំឡេង
    

    រដ្ឋ	ជម្រុញ
    Muting on/off	Muting on/Muting off
    ការលៃតម្រូវកម្រិតសំឡេង	ដុង
    Host and guest disconnect	បានផ្ដាច់
    Host and guest connect	បានភ្ជាប់
    Host and guest have low power	ថាមពលទាប
    Denoise Mode Switch	AI Denoise/ENC Denoise
    Broadcasting On	ការផ្សាយ
    Overall PTT (turn on via APP)	PTT On/PTT Off
    Ducking On	ទា
    របៀបធ្វើឱ្យប្រសើរឡើង	ឌីង

Screen Display :

មគ្គុទេសក៍ប្រតិបត្តិការ

ការដំឡើងថ្ម
Open the battery compartment cover, insert the battery into compartment and lock the cover. Please ensure that the battery is installed correctly (As shown in the figure).

Host and Guest Settings
Move the host/guest switch button up or down to set the device as host or guest.

1. Please set the device as host/guest before powering on. If you switch while the device is powered on, you need to restart the device.
2. Only one device can be set as the host and other devices should be set as guests in an intercom system group. If not, the device will not work properly

បើក/បិទថាមពល
Long press the power button to turn the headset on/off.

Host and Guest Pairing

The device is paired by default. If the device is reset as host/guest, or there is a pairing abnormality, please follow the steps to pair again:

1. ចុចឱ្យយូរ the volume + and – buttons in sync to enter pairing mode;
2. After successful pairing, the host indicator light keeps on blue and the guest indicator light keeps on green.

ភីធីធី
Press and hold the PTT button to enter PTT talk mode; release the button to enter mute mode; short press to turn off mute and back to the normal talk mode.

បិទសំឡេង
Short press the mute/PTT button, or flip the mic stick up to activate mute function. Voice prompt: ការផ្លាស់ប្តូរ

ការលៃតម្រូវកម្រិតសំឡេង
The volume level ranges from 1-6. Press the volume + or volume – button to adjust the volume. Voice prompt: Dong

Noise Reduction Mode Switch
ចុចខ្លី the denoise button to switch between ENC denoise/Al denoise.

ប្តូររបៀបធ្វើការ
The device is set to normal mode by default. It can be changed to recorder mode via the APP.
របៀបធម្មតា។: Users can plug an external headphone with a mic into the 3.5mm port to communicate, or connect with another set of Seekcom S1 intercom headset system (host or guest) for cascade extension.

Recorder mode: Users can connect a recording device to the 3.5mm port to monitor the recording status.

Broadcast Button Function Customize
In host mode, device is set as broadcasting function by default. The ducking function is switchable after turning on recorder mode via APP. In guest mode, device does not support broadcasting function. The ducking function is switchable after turning on recorder mode via APP.

1. Only the host supports broadcasting function
2. The ducking function is only available in recorder mode (It can be set via the APP). After the ducking function is enabled, pressing the ducking button while the “talk sound” and “recorder monitoring sound” are playing in sync can suppress the “recorder monitoring sound” and make the “talk sound” clearer

ការបញ្ជូនអូឌីយ៉ូ USB
Connect to the computer via the audio cable for real-time communication, such as online meeting, etc

របៀបពាក់
Adjust the extendable headband to an appropriate length, put on the headset and point the microphone capsule toward your mouth.

សាកថ្ម
Method 1. Take out the battery and place it in the charging base, then connect the power supply to charge.
Method 2. Plug the charging cable to the USB port of the headset, then connect the power supply to charge.

APP Connection and Operation (Connected with the host)

1. Search and download the “Comica Audio” APP in your mobile phone’s APP store;
   អូឌីយ៉ូ Comica
   
2. Turn on the Bluetooth of your mobile phone and get close to the host;
3. Open the APP to search and add the device: Seekcom S1;
   
   
4. After successful pairing, you can check the device state and operate all functions via the APP
   
   
   1. If the Bluetooth pairing fails or the device needs to be connected to a new mobile phone, please long press the Bluetooth reset button for 5 seconds to reset it.
   2. One-key ducking, recorder mode, one-to-one talk, overall PTT, voice prompt language switch, ect., can be set or switched via the APP.

ធ្វើឱ្យប្រសើរឡើង

អាប់ដេតកម្មវិធីបង្កប់

1. Download the Seekcom S1 firmware upgrade package to the computer from the Comica official webគេហទំព័រ។
2. after turning off the device, press and hold the volume + and power button in sync to enter copy mode. Copy the firmware upgrade package to the Seekcom S1-UPDATE folder.
3. Disconnect the USB audio cable and restart the device to upgrade automatically.

ការអាប់ដេតការតភ្ជាប់ប៊្លូធូស
Open the “Comica Audio” APP and connect with Seekcom S1. Then go to the device homepage and select settings icon in the upper right corner-Univer-sal-Firmware Upgrade.

ការបញ្ជាក់

Webគេហទំព័រ៖ comica-audio.com
ហ្វេសប៊ុក៖ Comica Audio Tech Global
អ៊ីនtagអង្គ​ចងចាំ: អូឌីយ៉ូ Comica
YouTube៖ អូឌីយ៉ូ Comica

ឯកសារ/ធនធាន

COMICA Seekcom S1 Wireless Intercom Headset System [pdf] សៀវភៅណែនាំអ្នកប្រើប្រាស់ 118, Seekcom S1 Wireless Intercom Headset System, Seekcom S1, Wireless Intercom Headset System, Intercom Headset System, Headset System

ឯកសារយោង

• សៀវភៅណែនាំអ្នកប្រើប្រាស់