Bluebird AI Robin Platform និងការរួមបញ្ចូលកាមេរ៉ា

ការណែនាំអំពីការដំឡើងរហ័ស

Thank you for purchasing our products. Feel free to contact us if you have any question. This manual is applicable to LD-LM-BA-1111-L1/LD-LM-BA-2222-L2 AI Camera Specification. This manual may contain technical inaccuracies, or inconsistencies with respect to product function or operation, or printing errors. Our company will update the contents of this guide according to future enhancement of product functions and will regularly improve or update the products or procedures described in this guide. The updated contents will be added to the new version of this guide without prior notice.

សេចក្តីណែនាំអំពីសុវត្ថិភាព

គោលបំណងនៃកំណត់ត្រាសុវត្ថិភាពគឺដើម្បីធានានូវប្រតិបត្តិការត្រឹមត្រូវដោយអ្នកប្រើប្រាស់ ដើម្បីជៀសវាងគ្រោះថ្នាក់ ឬការបាត់បង់ទ្រព្យសម្បត្តិ។ មុនពេលប្រើផលិតផលនេះ សូមអានការណែនាំនេះដោយប្រុងប្រយ័ត្ន ហើយរក្សាទុកវាឱ្យបានត្រឹមត្រូវសម្រាប់ជាឯកសារយោងនាពេលអនាគត។

ការព្រមាន

1. Using a power supply that meets the SELV (Safety Extra Low Voltage) requirements, and the rated DC voltage is 12V and the rated current is 1A conformed to the limited power source.
2. Do not disassemble or modify the product in any way in case the device does not work properly, instead please contact the dealer from whom you purchased the product. Damage caused by unauthorized modification or repair to the device will not be covered by the warranty.
3. In door use only. Do not expose the product to rain or water to reduce the risk of fire or electric shock.
4. Installation of the product shall comply with local regulations.
5. Power-off device should be used in building wiring.

ការយកចិត្តទុកដាក់

1. Check if proper power supply is provided before operating the product.
2. កុំទម្លាក់ឬគោះផលិតផលយ៉ាងខ្លាំង។
3. Please make sure the camera lens are clean. When needed, using a slightly wet paper with alcohol to gently wipe off dust.
4. Avoid direct strong light (i.e., bright light, sunlight, etc.) into the camera lens, or the image sensor in the product might get life shortened.
5. Avoid direct laser light into the camera lens if laser devices are used.
6. void working environment with high humidity, strong dust, extreme hot or cold (normal working temperature: – 10 ˜～ + 60 ˜), strong electromagnetic radiation or other critical conditions.
7. Ensure proper air flow around the camera, or heat may accumulate and damage the camera.
8. Avoid water or other liquid flowing into the camera.
9. Pack the product with the original factory packaging or materials of comparative quality when transporting the product.
10. Do not disassemble the equipment otherwise damages may be made to precise components inside the product.

ការណែនាំអំពីផលិតផល

កាមេរ៉ា AI រួមបញ្ចូលគ្នានូវកាមេរ៉ាអាណាឡូកបែបបុរាណជាមួយនឹងសមត្ថភាពវិភាគឆ្លាតវៃឌីជីថល។ ដោយផ្អែកលើក្បួនដោះស្រាយការវិភាគវីដេអូចុងក្រោយបំផុត និងបន្ទះឈីបបង្កើនល្បឿនផ្នែករឹងដោយក្រុម bluebird កាមេរ៉ាដំណើរការប្រព័ន្ធប្រតិបត្តិការលីនុចដែលបានបង្កប់ជាមួយនឹងភាពវៃឆ្លាត ស្ថេរភាព និងភាពជឿជាក់។ ការថតវីដេអូ NVR ត្រូវបានគាំទ្រសម្រាប់ការផ្ទុកកណ្តាល ហើយទិន្នន័យការវិភាគអាចត្រូវបានរក្សាទុកនៅលើពពក ដើម្បីងាយស្រួលក្នុងការគ្រប់គ្រង និងប្រើប្រាស់ទិន្នន័យ។

លក្ខណៈផលិតផល

1. បច្ចេកវិទ្យាប៉ាតង់
2. Multi-objects detection and tracking. Cross-camera re-identification. Action recognition. Large scale data association.
3. ផ្នែករឹងដ៏មានឥទ្ធិពល
4. Integrated proprietary AI engine, surging calculation and powerful performance Ultra-sensitive lens.
5. Supporting night vision.
6.  ការប្រើប្រាស់ថាមពលទាប។
7.  Streamlined shape in small formfactor.
8. Good heat dissipation performance. POE (Power over Ethernet) support.
9. ការដំឡើងងាយស្រួល។
10. តម្លៃដាក់ពង្រាយទាប។

ករណីនៃការរំខានបណ្តាញ ដើម្បីធានាបាននូវភាពត្រឹមត្រូវនៃការវិភាគ កំណត់ជាមុននូវសមត្ថភាពវិភាគ AI ច្រើនឈុត វាអាចត្រូវបានប្ដូរតាមបំណងតាមការប្រើប្រាស់ផ្សេងៗគ្នា។

កម្មវិធីសំខាន់ៗ
It is suitable for all kinds of occasions requiring network remote monitoring, such as:

1. Passenger flow statistics service for large outdoor scenes, indoor stadiums, large shopping malls, etc.
2. Provide remote monitoring services for nursing home, kindergartens and schools.
3. Cross-camera re-identification services for boutiques, supermarket chains, offices, etc.
4. Unattended system of indoor parking lot.
5. Assembly line monitoring, event alarm detecting service for warehouse monitoring.
6. Airport, railway station, bus station, etc.

ការដំឡើង

បញ្ហាដែលត្រូវការការយកចិត្តទុកដាក់

1. When unpacking the packing box, please check carefully to make sure that the product is not damaged.
2. Please read this chapter carefully before installation.
3. Be sure to turn off the power supply of all relevant equipment during installation.
4. ពិនិត្យការផ្គត់ផ្គង់ថាមពលវ៉ុលtage ដើម្បីការពារការខូចខាតឧបករណ៍ដែលបណ្តាលមកពី voltage មិនត្រូវគ្នា។
5. Installation environment: please do not use it in the excessive humidity or high temperature environment. Please keep good ventilation and pay attention to rain proof; Avoid installation in the environment of severe vibration.
6. If the equipment does not work normally, please contact the device supplier for inspection. Please do not disassemble or modify the equipment in any way. Problems caused by unauthorized modification or repair are not covered by the warranty.

រចនាសម្ព័ន្ធកាមេរ៉ា និងចំណុចប្រទាក់

ការណែនាំអំពីការដំឡើង
AI Camera Specification is usually installed with spring buckle.

សំខាន់៖
Before installing the device, please select an appropriate place. The ceiling where the device is installed should have a certain thickness and can bear at least 3 times the weight of the camera.

សមាសធាតុនៃឧបករណ៍
The whole camera and its accessories include the whole camera, spring buckle, M5 nut and M5 gasket, as shown in the figure below.

នីតិវិធីដំឡើង

វិធីសាស្រ្តដំឡើង
Make a 7cm diameter hole in the ceiling, connect the wire and power line, and then clip the spring buckle into the hole.

ការផ្គូផ្គងឧបករណ៍

1. Download the BBLink App from the App Store (iOS devices) or Google Play (Android devices).
2. Sign up a BBLink account, If you already have an account, please Log in directly. Go to the App homepage. Tap Add Device, and scanning the QR code on the bottom of the device or on the packaging box.
   
3. Allow the on-screen instructions to complete device pairing.

ការយកចិត្តទុកដាក់

1.  Before pairing the device, please power on the device first. You can use a power adapter or connect to a POE (Power over Ethernet) switch with a network cable for power supply.
2.  When you select WiFi as the device networking method, please choose a 2.4G WiFi to connect.
3.  Only one QR code can be scanned each time.
4.  When pairing, please keep your mobile phone, router and device close to each other.
5. When you choose the wired or WiFi networking methods, you need to select DHCP or static IP. If you choose static IP, you are required to enter Mask, Route, DNS, starting IP and the number. The number of IP number represents how many devices you need to activate, and a maximum of 253 can be entered.

ការពិពណ៌នាអំពីស្ថានភាព LED

• The red light flashes slowly The device is powered
• The red light flashes quickly The device is pairing
• The green light flashes slowly The device is working
• The red light and the green light flash alternately The device is either off-line or malfunctioning

ប៉ារ៉ាម៉ែត្រ

ប៉ារ៉ាម៉ែត្រឧបករណ៍

• Device size 128.6mm × Width 84.6mm × 65.0mm high
• Maximum frame rate 30fps
• Maximum resolution 1920*1080P
• Whether POE power supply is supported yes

កែវថត

• Lens type CMOS
• focal length 2.7mm
• Lens adjustment angle range Vertical: 15-40 degrees

វីដេអូ

• Video compression standards H. 264 and MJPEG
• Low illumination support

បណ្តាញ

• Network interface 1 (RJ-45, support 10m/100m bps), 2.4G WIFI
• Storage function support SD card
• Continuously transfer after network interruption support

ការផ្គត់ផ្គង់ថាមពល

• Power supply mode IEEE802.3af standard POE supply voltage / DC 12V ការផ្គត់ផ្គង់ថាមពល

សេវាកម្មក្រោយពេលលក់
Thank you for choosing this product. In order to fully enjoy the perfect after-sales service support, please read the description of warranty card carefully and keep it properly. We will provide you with after-sales service according to Bluebird’s after-sales service standard. Please check Bluebird’s official website for details of after-sales service. Some of the information is excerpted as follows:

1.  The warranty period starts from the date of the first purchase of the product, and the purchase date is subject to the invoice date of the purchased product. If there is no valid invoice, the warranty period will be calculated from the date of delivery. If the invoice date of the product is later than the actual delivery date of the product, the warranty period shall be calculated from the actual delivery date of the product.
2.  No warranty (excerpt only, please refer to the after sales service policy for details)
   1. Exceeding the specified warranty period;
   2. Failure or damage caused by misuse, accident, modification, improper physical or operating environment, natural disaster, surge and improper maintenance or storage;
   3. Failure or damage caused by third party products, software, services or behaviors;
   4. Normal decolorization, abrasion and consumption during the use of the product;
   5. ផលិតផលអាចដំណើរការជាធម្មតាដោយគ្មានការរំខានឬកំហុស។
   6. ការបាត់បង់ទិន្នន័យឬការខូចខាត;
   7. Consumable parts, except for malfunction due to material or process defects;
   8. Unable to show the valid warranty certificate and valid original purchase invoice or receipt of the product, the original serial number of the product is altered, replaced or torn, the product has no serial number, or the product model or number on the warranty certificate is inconsistent with the actual product;
   9. Not follow the attached quick installation instructions or not use the product in the intended function or environment, or any other situation that you violent the operation manual after confirmation by Bluebird.
3. Bluebird is not responsible for the additional promises made to you by the seller.

តម្រូវការ FCC

ការផ្លាស់ប្តូរ ឬការកែប្រែណាមួយដែលមិនត្រូវបានអនុម័តដោយភាគីដែលទទួលខុសត្រូវចំពោះការអនុលោមតាមច្បាប់អាចចាត់ទុកជាមោឃៈសិទ្ធិអំណាចរបស់អ្នកប្រើប្រាស់ក្នុងប្រតិបត្តិការឧបករណ៍។
ឧបករណ៍នេះអនុលោមតាមផ្នែកទី 15 នៃច្បាប់ FCC ។ ប្រតិបត្តិការគឺស្ថិតក្រោមលក្ខខណ្ឌពីរដូចខាងក្រោមៈ

1. ឧបករណ៍នេះប្រហែលជាមិនបង្កការរំខានដែលបង្កគ្រោះថ្នាក់ទេ។
2. ឧបករណ៍នេះត្រូវតែទទួលយកការជ្រៀតជ្រែកណាមួយដែលទទួលបាន រួមទាំងការជ្រៀតជ្រែកដែលអាចបណ្តាលឱ្យប្រតិបត្តិការដែលមិនចង់បាន។ ឧបករណ៍បញ្ជូននេះមិនត្រូវដាក់ទីតាំងរួមគ្នា ឬដំណើរការដោយភ្ជាប់ជាមួយអង់តែន ឬឧបករណ៍បញ្ជូនផ្សេងទៀតឡើយ។

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body.

Blue Bird AI Inc.,

• 3001 Bishop Drive, Ste 300,
• San Ramon, CA 94583
• www.bluebird.com

លេខទំនាក់ទំនង៖

• + 1 xxx-xxx-xxx
• + 1 xxx-xxx-xxx

សំណួរគេសួរញឹកញាប់

• សំណួរ៖ តើកាមេរ៉ាអាចប្រើនៅខាងក្រៅបានទេ?
  A: Yes, the camera can be used outdoors, but it should be protected from direct exposure to harsh weather conditions.
• សំណួរ៖ តើការមើលឃើញពេលយប់ត្រូវបានគាំទ្រទេ?
  A: Yes, the camera supports night vision functionality for low-light environments.

ឯកសារ/ធនធាន

Bluebird AI Robin Platform និងការរួមបញ្ចូលកាមេរ៉ា [pdf] សៀវភៅណែនាំអ្នកប្រើប្រាស់ LD-LM-BA-1111-L1, LD-LM-BA-2222-L2, Robin Platform and Camera Integration, Robin, Platform and Camera Integration, Camera Integration, Integration

ឯកសារយោង

• សៀវភៅណែនាំអ្នកប្រើប្រាស់