សៀវភៅណែនាំសម្រាប់ឧបករណ៍ចាប់សញ្ញាលេចធ្លាយឧស្ម័នទូរទឹកកក និងឧស្ម័នងាយឆេះ Fieldpiece DRX3

1. សេចក្តីផ្តើម

The Fieldpiece DRX3 is a professional-grade refrigerant and combustible gas leak detector designed for HVACR technicians. This device is engineered to accurately detect a wide range of gases, including A3, A2L, and A1 refrigerants, as well as various combustible gases. Its robust design and advanced sensor technology provide reliable performance in diverse field conditions. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your DRX3 unit.

Image 1: The Fieldpiece DRX3 Refrigerant & Combustible Gas Leak Detector. This image displays the main unit with its flexible probe, digital display, and control buttons.

2. លក្ខណៈពិសេស

The DRX3 leak detector incorporates several key features to enhance its functionality and user experience:

• Versatile Detection: Detects A3, A2L, A1 refrigerants, and combustible gases using an accurate, field-replaceable heated diode sensor.
• Broad Gas Compatibility: Suitable for use with HC, HFC, HCFC, CFC, HFO, H2/N2 (Tracer Gas), and blend refrigerants, as well as heating gases.
• ធន់ និងទម្ងន់ស្រាល៖ Constructed for durability with a lightweight design, featuring long-life, field-replaceable batteries.
• ភាពប្រែប្រួលដែលអាចកែតម្រូវបាន៖ Offers auto and manual zero modes, along with high, medium, and low sensitivity settings for precise leak identification.
• Clear Feedback: Provides multiple visual and audio feedback indicators that adjust with leak intensity, facilitating quick leak location.
• Job Link System App Connectivity: Integrates with the Job Link System app for enhanced data management and reporting.

Image 2: A graphic illustrating the key features and benefits of the Fieldpiece DRX3, including its detection capabilities for various refrigerants and gases, backlit LCD screen, and Job Link System app integration.

3. មាតិកាកញ្ចប់

Upon unpacking your Fieldpiece DRX3, please verify that all the following items are included:

• One (1) Heated Diode Refrigerant Leak Detector - DRX3
• One (1) Blow-Molded Case
• One (1) Heated Diode Sensor - RXA3
• Four (4) AA batteries (pre-installed or included separately)

Image 3: A visual representation of the Fieldpiece DRX3 leak detector, its blow-molded carrying case, and the included heated diode sensor.

4. រៀបចំ

Follow these steps to prepare your DRX3 for operation:

1. ការដំឡើងថ្ម៖ Ensure four (4) AA batteries are correctly installed in the battery compartment. The DRX3 typically comes with batteries included.
2. បើកថាមពល៖ Press and hold the power button until the unit powers on and the display illuminates.
3. រយៈពេលកំដៅឡើង៖ Allow the DRX3 to complete its warm-up cycle, which is indicated on the display. This ensures the sensor reaches optimal operating temperature for accurate detection.
4. Zeroing the Unit: In a clean, fresh air environment (free from any potential gas or refrigerant leaks), press the 'ZERO' button. This calibrates the sensor to the ambient air, establishing a baseline for leak detection. Repeat zeroing if moving to an area with different ambient conditions.
5. ជ្រើសរើសភាពរសើប៖ Choose the appropriate sensitivity level (High, Medium, or Low) using the 'SENSITIVITY' button based on the expected leak size or the environment. Start with high sensitivity for general scanning and reduce it to pinpoint larger leaks.

5. សេចក្តីណែនាំប្រតិបត្តិការ

To effectively use your DRX3 leak detector:

1. តំបន់ស្កេន៖ Slowly move the probe tip around suspected leak points. Maintain a consistent speed of approximately 1-2 inches per second.
2. សង្កេតមើលសូចនាករ៖ Pay attention to both the visual display and the audible alarm. The display will show a numerical reading and a bar graph indicating leak intensity. The audible alarm will increase in frequency and pitch as a leak is detected.
3. Pinpointing Leaks: Once a leak is indicated, move the probe away from the area, re-zero the unit, and then slowly approach the suspected leak point again. This helps to isolate the exact source of the leak. Reduce sensitivity if the alarm is constant and overwhelming.
4. Using Auto/Manual Zero: The auto-zero feature continuously adjusts to background gas levels. For more precise pinpointing, switch to manual zero mode after detecting a general leak area.
5. Job Link System App: Connect the DRX3 to the Job Link System app via Bluetooth for real-time data logging, reporting, and integration with other Fieldpiece tools. Refer to the Job Link app's specific instructions for pairing and usage.

Image 4: A technician using the Fieldpiece DRX3 to detect leaks on an HVAC unit, demonstrating the device's practical application in the field.

6. ការថែទាំ

Regular maintenance ensures the longevity and accuracy of your DRX3:

• ការជំនួសឧបករណ៍ចាប់សញ្ញា៖ The heated diode sensor (RXA3) is field-replaceable and has a typical life of 300 hours. Replace the sensor when its performance degrades or when prompted by the unit. Refer to the sensor replacement guide for detailed steps.
• ការសម្អាត៖ លុបឯកតាជាមួយនឹងការផ្សាយពាណិជ្ជកម្មamp cloth. Do not use abrasive cleaners or solvents. Ensure the probe tip is free from debris.
• ការថែរក្សាថ្ម៖ Replace batteries when the low battery indicator appears. Remove batteries if the unit will not be used for an extended period to prevent leakage.
• ការផ្ទុក៖ Store the DRX3 in its blow-molded case in a cool, dry place, away from extreme temperatures and direct sunlight.

7. ការដោះស្រាយបញ្ហា

If you encounter issues with your DRX3, consider the following:

• ឯកតាមិនបើក៖
  • ពិនិត្យមើលការដំឡើងថ្ម និងធានាថាថ្មនៅស្រស់។
  • Verify battery compartment contacts are clean and free of corrosion.
• Inaccurate Readings or Constant Alarm:
  • Re-zero the unit in a known clean air environment.
  • Check the sensor tip for obstructions or damage.
  • Consider replacing the heated diode sensor if it has exceeded its typical lifespan or shows signs of wear.
  • Adjust sensitivity settings; high sensitivity in a contaminated area can lead to constant alarms.
• គ្មានការរកឃើញ៖
  • Ensure the unit is powered on and has completed its warm-up cycle.
  • Verify the sensitivity setting is appropriate for the expected leak size.
  • Confirm the sensor is properly installed and functional.
• Connectivity Issues with Job Link App:
  • Ensure Bluetooth is enabled on your mobile device and the DRX3.
  • Restart both the DRX3 and the Job Link app.
  • Check the app for updates.

8. លក្ខណៈបច្ចេកទេស

Detailed technical specifications for the Fieldpiece DRX3:

Image 5: A detailed table outlining the technical specifications of the Fieldpiece DRX3, including sensor type, sensitivity, gas compatibility, battery life, and environmental ratings.

9. ការធានា និងការគាំទ្រ

For warranty information and technical support, please refer to the official Fieldpiece website or contact their customer service. Specific warranty terms and conditions may vary by region and purchase date. Keep your proof of purchase for warranty claims.

For additional resources, including FAQs and product registration, visit the Fieldpiece Store on Amazon.