សៀវភៅណែនាំអ្នកប្រើប្រាស់ RAB Lighting Slim Adjustable 30W Wallpack

1. សេចក្តីផ្តើម

This user manual provides detailed instructions for the installation, operation, and maintenance of the RAB Lighting Slim Adjustable 30W Wallpack (Model SLIM17FA30ADJ). This high-efficiency LED fixture is designed for outdoor use, offering adjustable light distribution and color temperature options to suit various lighting needs. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Figure 1: RAB Lighting Slim Adjustable 30W Wallpack, showcasing its sleek design and light output area.

2. ព័ត៌មានសុវត្ថិភាព

Always follow basic safety precautions when installing or working with electrical equipment. Failure to do so may result in serious injury or property damage.

• ផ្តាច់ថាមពល៖ Ensure power is turned off at the circuit breaker or fuse box before installation, maintenance, or any service.
• បុគ្គលិកអគ្គិសនីមានលក្ខណៈសម្បត្តិគ្រប់គ្រាន់៖ ការដំឡើងគួរតែត្រូវបានធ្វើឡើងដោយជាងអគ្គិសនីដែលមានសមត្ថភាពស្របតាមក្រមអគ្គិសនីជាតិ និងមូលដ្ឋានទាំងអស់។
• ការដាក់ដី៖ Properly ground the fixture to avoid electrical shock.
• វ៉ុលtage ភាពឆបគ្នា៖ ផ្ទៀងផ្ទាត់ថាការផ្គត់ផ្គង់វ៉ុលtage is compatible with the fixture's operating voltage (120-277V) ។
• Fixture Integrity: Do not operate the fixture if it is damaged. Inspect for shipping damage before installation.
• ប្រើតែខាងក្រៅប៉ុណ្ណោះ៖ ផលិតផលនេះត្រូវបានរចនាឡើងសម្រាប់តែការប្រើប្រាស់ខាងក្រៅប៉ុណ្ណោះ។

3. ការដំឡើងនិងការដំឡើង

The SLIM17FA30ADJ wallpack offers field-adjustable features for optimal performance.

3.1 ការដំឡើង

The fixture is designed for wall mounting. Ensure the mounting surface is structurally sound to support the fixture's weight (approximately 2.99 lbs).

1. បិទថាមពលនៅឧបករណ៍បំបែកសៀគ្វី។
2. Securely attach the mounting plate to the desired outdoor wall location using appropriate hardware (not included).
3. Connect the electrical wiring (line, neutral, ground) from the supply to the fixture's corresponding wires. Ensure all connections are secure and insulated.
4. Mount the fixture body onto the mounting plate, ensuring a tight seal to maintain its IP65 rating for protection against dust and water jets.

3.2 Field-Adjustable Color Temperature (CCT)

The SLIM17FA30ADJ features an internal switch to select the desired color temperature (CCT) before sealing the fixture. Options include 3000K (Warm White), 4000K (Neutral White), and 5000K (Cool White).

• Before final installation, locate the CCT switch inside the fixture.
• Select the desired color temperature by sliding the switch to the corresponding setting.
• Ensure the switch is firmly in place before closing and sealing the fixture.

3.3 Adjustable Cut-off Angle

The fixture allows for adjustment of the light cut-off angle from full cutoff up to 90° in 15° increments. This feature helps direct light precisely where needed and can ensure Dark Sky compliance when set to 0° (full cutoff).

• Refer to the markings on the fixture for angle adjustments.
• Carefully adjust the internal reflector or light engine mechanism to achieve the desired cut-off angle.
• Test the light distribution after adjustment to confirm the setting.

4. សេចក្តីណែនាំប្រតិបត្តិការ

The RAB Lighting Slim Adjustable Wallpack is designed for efficient and automatic operation.

4.1 Automatic Operation (Photocell)

The integrated photocell automatically controls the fixture's on/off cycles based on ambient light levels. The light will turn on at dusk and turn off at dawn, providing energy savings.

• Ensure the photocell sensor is not obstructed by debris, dirt, or external light sources, as this may affect its operation.
• No manual intervention is typically required for daily operation once installed.

៦.២ មុខងារ​បន្ថយ​ពន្លឺ

This fixture supports 0-10V dimming. Connect to a compatible 0-10V dimmer switch (sold separately) for adjustable light output.

• Consult the dimmer switch manufacturer's instructions for wiring and operation.
• Ensure proper wiring of the dimming control wires (purple and gray) to the 0-10V dimmer.

5. ការថែទាំ

The RAB Lighting Slim Adjustable Wallpack requires minimal maintenance due to its durable construction and LED technology.

• ការសម្អាត៖ សម្អាតផ្នែកខាងក្រៅនៃឧបករណ៍ជាប្រចាំដោយប្រើក្រណាត់ទន់amp ក្រណាត់​ដើម្បី​យក​ធូលី​និង​កំទេចកំទី​ចេញ។ កុំ​ប្រើ​ទឹក​សម្អាត​ដែល​មាន​ជាតិ​សំណឹក ឬ​សារធាតុ​រំលាយ។
• អធិការកិច្ច៖ Annually inspect the fixture for any signs of physical damage, loose wiring, or corrosion. Address any issues promptly.
• Photocell៖ Keep the photocell sensor clean and free from obstructions to ensure proper automatic operation.
• គ្មានផ្នែកដែលអាចផ្តល់សេវាអ្នកប្រើប្រាស់៖ There are no user-serviceable parts inside the fixture. Do not attempt to open or repair the LED module.

6. ការដោះស្រាយបញ្ហា

If you experience issues with your RAB Lighting Slim Adjustable Wallpack, refer to the following common problems and solutions:

If troubleshooting steps do not resolve the issue, please contact RAB Lighting customer support.

7. លក្ខណៈបច្ចេកទេស

8. ការធានា និងការគាំទ្រ

RAB Lighting stands behind the quality of its products.

8.1 ព័ត៌មានធានា

For detailed warranty information, please refer to the official RAB Lighting website or the warranty card included with your product. General warranty terms typically cover defects in materials and workmanship under normal use.

8.2 ជំនួយអតិថិជន

If you have any questions, require technical assistance, or need to report an issue, please contact RAB Lighting customer support:

• Webគេហទំព័រ៖ www.rablighting.com
• ទូរស័ព្ទ៖ យោងទៅ webគេហទំព័រសម្រាប់លេខទំនាក់ទំនងក្នុងតំបន់។
• When contacting support, please have your product model number (SLIM17FA30ADJ) and purchase date available.