Autec SKANDIC Alloy Wheel User Manual

សេចក្តីផ្តើម

This manual provides essential information for the proper installation, use, and maintenance of your Autec SKANDIC light alloy wheel. The SKANDIC wheel is designed with a clear and timeless look, featuring a salt-resistant clear coat for durability, making it suitable for year-round use, including winter conditions. It is ECE-approved, ensuring its applicability across Europe without requiring vehicle document corrections.

This wheel is compatible with Ford Ka+ and Fiesta models. Please read this manual thoroughly before installation and use to ensure safety and optimal performance.

ការដំឡើងនិងការដំឡើង

Proper installation is crucial for the safety and performance of your vehicle. It is recommended that wheel installation be performed by a qualified professional.

សមាសធាតុរួមបញ្ចូល៖

• 1 x Autec SKANDIC Brillantsilber 6.5x16 ET 47,5 4x108 Rim
• 1 x Centre Ring (if required for specific vehicle fitment)
• 4 x Wheel Bolts/Nuts (if different from standard vehicle bolts and mounting material are required)

ជំហានដំឡើង៖

1. ការរៀបចំ៖ Ensure the vehicle is safely lifted and supported. Remove the existing wheel. Clean the wheel hub surface thoroughly to remove any rust or debris.
2. ការត្រួតពិនិត្យសមភាព៖ Before final installation, perform a test fit of the new rim to ensure proper clearance with brake calipers and suspension components.
3. Install Centre Ring (if applicable): If a centre ring is provided, carefully place it onto the vehicle's hub. This ensures the wheel is perfectly centered.
4. Mount the Wheel: Carefully place the Autec SKANDIC wheel onto the hub, aligning the bolt holes.
5. Install Wheel Bolts/Nuts: Insert the provided or appropriate wheel bolts/nuts. Hand-tighten them in a star pattern to ensure the wheel is seated evenly.
6. Torque Tightening: Using a torque wrench, tighten the wheel bolts/nuts to the vehicle manufacturer's specified torque settings. Always follow a star pattern to ensure even pressure. កុំរឹតបន្តឹង។
7. យានជំនិះក្រោម៖ បន្ថយយានទៅដីដោយប្រុងប្រយ័ត្ន។
8. ការពិនិត្យចុងក្រោយ៖ After driving approximately 50-100 miles (80-160 km), re-check the torque of all wheel bolts/nuts to ensure they remain properly tightened.

Figure 1: Autec SKANDIC light alloy wheel, showcasing its full design.

រូបភាពទី 2: លម្អិត view of the wheel's center, showing the Autec logo and bolt holes.

ការប្រើប្រាស់និងភាពឆបគ្នា។

The Autec SKANDIC wheel is engineered for reliable performance and broad compatibility within its specified parameters.

ភាពឆបគ្នានៃរថយន្ត៖

This wheel is specifically compatible with Ford Ka+ និង រថយន្ត Ford Fiesta models. Always verify the wheel specifications (diameter, width, offset, bolt pattern, and centerbore) against your vehicle's requirements before purchase and installation.

ECE Approval:

The SKANDIC wheel is ECE-approved, meaning it meets European safety and quality standards. This approval allows for its use across Europe without the need for additional vehicle document corrections, simplifying compliance.

ការប្រើប្រាស់រដូវរងា៖

Thanks to its salt-resistant clear coat, the Autec SKANDIC wheel is suitable for use as a winter wheel. This protective coating helps to resist corrosion from road salt and other environmental factors encountered during colder months.

ថែទាំ

Regular maintenance will help preserve the appearance and extend the lifespan of your Autec SKANDIC wheels.

ការសម្អាត៖

• Clean wheels regularly with mild car soap and water. Avoid harsh abrasive cleaners, brushes with stiff bristles, or strong chemical solvents, as these can damage the finish.
• For stubborn dirt or brake dust, use a pH-neutral wheel cleaner specifically designed for alloy wheels. Follow the product instructions carefully.
• Rinse thoroughly with clean water after cleaning to remove all soap or cleaner residue.
• Dry the wheels with a soft, clean cloth to prevent water spots.

អធិការកិច្ច៖

• Periodically inspect your wheels for any signs of damage, such as cracks, bends, deep scratches, or corrosion.
• Pay close attention to the inner barrel and bead seat areas, as these can be susceptible to damage from impacts.
• If any significant damage is found, consult a professional wheel repair specialist or replace the wheel if necessary.

រូបភាពទី ១៧៖ ការបិទជិត view of the wheel's spokes and outer rim, highlighting the finish.

ការដោះស្រាយបញ្ហា

While Autec wheels are manufactured to high standards, occasional issues may arise. Here are some common concerns and potential solutions:

Vibration or Steering Wheel Shake:

• មូលហេតុ៖ Unbalanced wheels, bent rim, loose wheel bolts, or tire issues.
• ដំណោះស្រាយ៖
  1. Check wheel bolt torque.
  2. Have wheels professionally balanced.
  3. Inspect rims for bends or damage.
  4. Check tires for uneven wear or damage.

Air Loss from Tire:

• មូលហេតុ៖ Puncture, damaged valve stem, improper tire bead seating, or rim damage.
• ដំណោះស្រាយ៖
  1. Inspect tire for punctures.
  2. Check valve stem for leaks or damage.
  3. Have a professional inspect the tire bead and rim for proper seating or damage.

Unusual Noise from Wheel Area:

• មូលហេតុ៖ Loose wheel bolts, brake issues, wheel bearing issues, or debris caught in the wheel.
• ដំណោះស្រាយ៖
  1. Check wheel bolt torque.
  2. Inspect brake components for wear or interference.
  3. Have a professional inspect wheel bearings.
  4. Visually check for any foreign objects.

If you experience persistent issues or significant damage, always consult a certified automotive technician or wheel specialist for diagnosis and repair.

លក្ខណៈបច្ចេកទេស

Detailed technical specifications for the Autec SKANDIC wheel:

ការធានា និងការគាំទ្រ

Specific warranty terms for Autec products are typically provided by the manufacturer or the authorized seller at the time of purchase. Please retain your proof of purchase for any warranty claims.

For Technical Support or Warranty Inquiries:

• Refer to the documentation provided with your purchase for direct contact information for Autec or your authorized dealer.
• Visit the official Autec website for general information and potential support contacts.
• Contact the seller from whom you purchased the wheel for assistance with product-specific issues or warranty claims.

Always provide your product model number (SKANDIC, S6516474054318) and purchase details when seeking support.