កំណត់ហេតុTag សៀវភៅណែនាំអ្នកប្រើប្រាស់ PDF សម្រាប់ឧបករណ៍កត់ត្រាទិន្នន័យសីតុណ្ហភាព UTRIX-16

1. សេចក្តីផ្តើម

កំណត់ហេតុTag UTRIX-16 is a high-performance, multi-use temperature data logger designed for reliable and accurate monitoring across a wide range of applications. This device records temperature data and generates comprehensive PDF reports without requiring special software or hardware. Its integrated USB connector allows for easy data transfer and configuration.

2. ព័ត៌មានសុវត្ថិភាព

• Do not expose the device to extreme physical shock or vibration.
• Avoid immersing the device in liquids.
• Do not attempt to open or modify the device, as this will void the warranty and may cause damage.
• បោះចោលថ្មតាមបទប្បញ្ញត្តិក្នុងស្រុក។
• Ensure the USB connector is clean and dry before connecting to a computer.

3. មាតិកាកញ្ចប់

ផ្ទៀងផ្ទាត់ថាធាតុទាំងអស់មាននៅក្នុងកញ្ចប់៖

• កំណត់ហេតុTag UTRIX-16 PDF Temperature Data Logger
• សៀវភៅណែនាំអ្នកប្រើ (ឯកសារនេះ)

4. ឧបករណ៍លើសview

The UTRIX-16 features a compact design with clear indicators and control buttons.

រូបភាពទី 1៖ ខាងមុខ view of the LogTag UTRIX-16 PDF Temperature Data Logger. This image displays the device's front panel, showing the "ALERT" and "OK" indicator lights, and the "STOP" and "START/Mark" buttons. The LogTag brand and "USB PDF TEMPERATURE RECORDER" text are visible, along with a serial number barcode.

• ALERT Indicator: Flashes when a pre-configured temperature alert threshold has been exceeded.
• OK Indicator: Flashes to confirm normal operation and within-range temperature readings.
• ប៊ូតុងបញ្ឈប់៖ Press to stop the current logging session.
• START/Mark Button: Press to start a new logging session or to insert a mark into the data stream during logging.
• Integrated USB Connector: Located at the bottom, used for connecting to a computer for configuration and data download.

រូបភាពទី 2៖ កំណត់ហេតុTag UTRIX-16 with its integrated USB connector extended. This view highlights the USB-A plug, ready for connection to a computer's USB port, facilitating direct data transfer and device configuration.

5. រៀបចំ

5.1 ការកំណត់រចនាសម្ព័ន្ធដំបូង

The UTRIX-16 is typically pre-configured for immediate use. However, for custom settings (e.g., logging interval, alert thresholds, start delay), you will need to use the LogTag Analyzer software. This software is available for download from the official LogTag webគេហទំព័រ។

1. Download and install the LogTag កម្មវិធីវិភាគពី កំណត់ហេតុTag Recorders Software.
2. Connect the UTRIX-16 to a USB port on your computer.


រូបភាពទី 3៖ កំណត់ហេតុTag UTRIX-16 data logger connected to a computer's USB port. This illustrates the direct connection method for data download and configuration, eliminating the need for a separate interface cradle.

3. កំណត់ហេតុTag Analyzer software should automatically detect the connected device.
4. Follow the on-screen prompts within the software to configure logging parameters as needed.

5.2 ព័ត៌មានអំពីថ្ម

The UTRIX-16 uses a CR2 battery (included). The battery is designed for long life and is generally not user-replaceable without specialized tools. If battery replacement is required, it is recommended to contact LogTag support or an authorized service center.

6. ប្រតិបត្តិការ

6.1 Starting a Logging Session

To start a new logging session:

1. Ensure the device is not currently logging (check the OK/ALERT indicators).
2. ចុចឱ្យជាប់ START/សម្គាល់ button for approximately 5 seconds until the OK indicator flashes rapidly.
3. Release the button. The OK indicator will flash at regular intervals, indicating that logging has started.

6.2 Stopping a Logging Session

To stop an active logging session:

1. ចុចឱ្យជាប់ បញ្ឈប់ button for approximately 5 seconds until the ALERT indicator flashes rapidly.
2. Release the button. The device will cease logging.

6.3 Marking Data

During an active logging session, you can insert a mark into the data stream:

• ចុចដោយសង្ខេប START/សម្គាល់ button (less than 2 seconds).
• A mark will be recorded in the data, visible when the data is downloaded and analyzed.

7. Data Retrieval and Reporting

The UTRIX-16 generates a PDF report directly when connected to a computer.

1. Connect the UTRIX-16 to a USB port on your computer.
2. The device will appear as a removable drive.
3. Locate and open the generated PDF report file. This report contains a summary of the logging session, temperature graphs, and statistical data.
4. For advanced analysis and configuration, use the LogTag កម្មវិធីវិភាគ។

8. ការថែទាំ

8.1 ការសម្អាត

Wipe the device clean with a soft, damp ក្រណាត់។ កុំប្រើសារធាតុសម្អាត ឬសារធាតុរំលាយ។

8.2 ការជំនួសថ្ម

The battery in the UTRIX-16 is designed for extended use and is not intended for user replacement. If the battery life is depleted, contact LogTag support for service options.

9. ការដោះស្រាយបញ្ហា

10. លក្ខណៈបច្ចេកទេស

11. ការធានា និងការគាំទ្រ

កំណត់ហេតុTag products are manufactured to high standards. For warranty information and technical support, please refer to the official LogTag webគេហទំព័រ ឬទាក់ទងអ្នកចែកចាយក្នុងស្រុករបស់អ្នក។ រក្សាបង្កាន់ដៃទិញរបស់អ្នកជាភស្តុតាងនៃការទិញ។

Official LogTag Webគេហទំព័រ៖ www.logtag- recorders.com