Diablo DML-9LP Probe Kit Vehicle Loop Detector

1. សេចក្តីផ្តើម

The Diablo DML-9LP vehicle sensor kit is engineered for reliable vehicle detection in solar-powered gate applications. This advanced detector is designed to operate efficiently across a wide voltage range, from 10 to 30 volts AC or DC, ensuring compatibility with various power setups. Its ultra-low power consumption, drawing approximately 3 milliamperes in standby, makes it ideal for energy-efficient systems. The integrated power LED provides continuous visual feedback, winking once per second to confirm the detector is operating in its low power mode. The DML-9LP probe is recognized for its superior reliability, straightforward operation, and minimal current draw, setting a high standard for vehicle detection solutions.

២.១. លក្ខណៈសំខាន់ៗ

• Solar-Powered Application Ready: Specifically designed for use with solar-powered gate systems, optimizing energy efficiency.
• វ៉ុលធំទូលាយtage ភាពឆបគ្នា៖ Operates on any voltage from 10 to 30 volts AC or DC.
• ការប្រើប្រាស់ថាមពលទាបបំផុត៖ Draws approximately 3 milliamperes in standby, conserving power.
• Operational Indicator: Power LED winks continuously once per second to indicate low power mode operation.
• ភាពជឿជាក់ខ្ពស់៖ Engineered for consistent and dependable vehicle detection.
• Simplicity of Use: Designed for easy installation and minimal maintenance.

3. ព័ត៌មានសុវត្ថិភាព

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in property damage, serious injury, or death.

• សុវត្ថិភាពអគ្គិសនី៖ Always disconnect power before installing or servicing the detector. Work with electrical components should only be performed by qualified personnel.
• ខ្សែភ្លើងត្រឹមត្រូវ៖ Ensure all wiring connections are secure and comply with local electrical codes. Incorrect wiring can lead to malfunction or hazards.
• ការពិចារណាអំពីបរិស្ថាន៖ Install the detector in a location protected from extreme weather conditions and physical damage.
• Gate System Safety: Ensure the gate system itself has appropriate safety features, such as photo-eyes or safety edges, to prevent entrapment or injury.
• កុមារ និងសត្វចិញ្ចឹម៖ រក្សាកុមារ និងសត្វចិញ្ចឹមឱ្យឆ្ងាយពីតំបន់ច្រកទ្វារកំឡុងពេលប្រតិបត្តិការ។

4. មាតិកាកញ្ចប់

ពេលបើកកញ្ចប់ សូមផ្ទៀងផ្ទាត់ថាសមាសធាតុទាំងអស់មានវត្តមាន និងមិនខូចខាត។

Image: Diablo DML-9LP Probe Kit showing the main detector unit, the yellow probe with coiled cable, and the instruction manual.

• 1 x Diablo DML-9LP Vehicle Loop Detector Unit
• 1 x DML-9LP Probe with Integrated Cable
• 1 x Operation and Instruction Manual (this document)

5. ការដំឡើងនិងការដំឡើង

Proper installation is crucial for optimal performance and safety. It is recommended that installation be performed by a qualified technician.

១. ការដាក់ឧបករណ៍ស៊ើបអង្កេត

1. Determine the desired detection zone for vehicles. The probe should be buried or placed strategically within this zone.
2. For optimal detection, ensure the probe is positioned to detect the vehicle's metal mass effectively. Avoid placing it too close to large metal objects that are not vehicles.
3. Bury the probe at an appropriate depth (typically 6-12 inches) to protect it from damage and environmental factors.

5.2. ការតភ្ជាប់ខ្សែភ្លើង

Refer to the wiring diagram provided with your gate opener or control panel for specific connections. The DML-9LP detector typically requires connections for power (10-30V AC/DC) and output to the gate opener's trigger input.

1. ការតភ្ជាប់ថាមពល៖ Connect the power wires from your gate opener's power supply (10-30V AC/DC) to the designated power terminals on the DML-9LP detector. Observe polarity if connecting DC power.
2. ការតភ្ជាប់លទ្ធផល៖ Connect the detector's output terminals to the gate opener's vehicle detection or trigger input. This output signals the gate opener when a vehicle is detected.
3. ការតភ្ជាប់ការស៊ើបអង្កេត៖ The probe cable is permanently attached to the probe and connects directly to the detector unit. Ensure this connection is secure.

5.3. Mounting the Detector Unit

Mount the DML-9LP detector unit in a secure, weather-protected enclosure or location near the gate opener control board. Ensure it is easily accessible for future servicing if needed.

6. សេចក្តីណែនាំប្រតិបត្តិការ

Once properly installed and powered, the DML-9LP detector operates automatically.

• បង្កើនថាមពល៖ Upon receiving power, the detector will initialize. The power LED will begin winking continuously once per second, indicating it is in low power mode and ready for operation.
• ការរកឃើញយានយន្ត៖ When a metallic object (vehicle) enters the detection field of the buried probe, the detector will sense the change in inductance.
• សញ្ញាទិន្នផល៖ Upon detection, the detector will activate its output, sending a signal to the connected gate opener, typically triggering the gate to open or hold open.
• Detection Release: Once the vehicle leaves the detection field, the detector will de-activate its output, signaling the gate opener to close (if configured to do so).

The low power mode ensures minimal energy consumption, making it highly efficient for solar-powered installations.

7. ការថែទាំ

The Diablo DML-9LP detector is designed for minimal maintenance. However, periodic checks can help ensure long-term reliable operation.

• ការត្រួតពិនិត្យមើលឃើញ៖ Periodically inspect the detector unit and all wiring connections for any signs of damage, corrosion, or loose connections.
• Probe Area: Ensure the area above the buried probe remains clear of large debris or new metallic installations that could interfere with detection.
• ការផ្គត់ផ្គង់ថាមពល៖ Verify that the power supply to the detector is stable and within the specified voltagជួរ e (10-30V AC / DC) ។
• សូចនាករ LED៖ Observe the power LED to confirm it is winking continuously, indicating normal low power operation.

8. ការដោះស្រាយបញ្ហា

If you experience issues with your DML-9LP detector, refer to the following common troubleshooting steps.

If problems persist after following these steps, please contact Diablo Controls technical support or a qualified gate system technician.

9. លក្ខណៈបច្ចេកទេស

10. ការធានា និងការគាំទ្រ

Specific warranty terms and conditions for the Diablo DML-9LP Probe Kit Vehicle Loop Detector are typically provided by the manufacturer, Diablo Controls, at the time of purchase or on their official webគេហទំព័រ។ សូមរក្សាភស្តុតាងនៃការទិញរបស់អ្នកសម្រាប់ការទាមទារធានា។

For technical support, detailed product information, or to inquire about warranty service, please visit the official Diablo Controls webគេហទំព័រ ឬទាក់ទងផ្នែកសេវាកម្មអតិថិជនរបស់ពួកគេដោយផ្ទាល់។

Diablo Controls Contact Information:
សូមយោងទៅ www.diablocontrols.com សម្រាប់ព័ត៌មានលម្អិតទំនាក់ទំនង និងធនធានជំនួយថ្មីៗបំផុត។